This study focused on evaluating the reduction of chlorine content in waste polyvinyl chloride (WPVC) through high‐temperature catalytic hydrothermal treatment (HTT). Catalytic HTT experiments were carried out to evaluate the effect of noble metal catalysts (Ru/C, Pt/C, and Pd/C), residence time (0.5, 1, 2, and, 4 h), reaction temperature (300, 325, and 350°C), and catalyst loading (0, 5, and 10 wt%). The findings indicated that dechlorination efficiency can be achieved by 99.01% at 350°C and 1 h, with 10 wt% Pd/C loading. Based on chlorine balance, the chlorine content of the solid phase significantly decreased from 568.8 to 5.64 g kg−1at the same condition. The catalytic HTT solid residue ash has low chlorine content under most operational conditions. These results suggest that catalytic HTT is an effective method to dechlorinate WPVC as a high‐halogenated waste plastic in order to reduce its harmful effect on the environment.
Smart paper transformer: new insight for enhanced catalytic efficiency and reusability of noble metal nanocatalysts
Although noble metal nanocatalysts show superior performance to conventional catalysts, they can be problematic when balancing catalytic efficiency and reusability. In order to address this dilemma, we developed a smart paper transformer (s-PAT) to support nanocatalysts, based on easy phase conversion between paper and pulp, for the first time. The pulp phase was used to maintain the high catalytic efficiency of the nanocatalysts and the transformation to paper enabled their high reusability. Herein, as an example of smart paper transformers, a novel chromatography paper-supported Au nanosponge (AuNS/pulp) catalyst was developed through a simple water-based preparation process for the successful reduction of p -nitrophenol to demonstrate the high catalytic efficiency and reusability of the noble metal nanocatalyst/pulp system. The composition, structure, and morphology of the AuNS/pulp catalyst were characterized by XRD, TGA, FE-SEM, ICP, TEM, FT-IR, and XPS. The AuNS/pulp catalyst was transformed into the pulp phase during the catalytic reaction and into the paper phase to recover the catalysts after use. Owing to this smart switching of physical morphology, the AuNS/pulp catalyst was dispersed more evenly in the solution. Therefore, it exhibited excellent catalytic performance for p -nitrophenol reduction. Under optimal conditions, the conversion rate of p -nitrophenol reached nearly 100% within 6 min and the k value of AuNS/pulp (0.0106 s −1 ) was more than twice that of a traditional chromatography paper-based catalyst (0.0048 s −1 ). Additionally, it exhibited outstanding reusability and could maintain its high catalytic efficiency even after fifteen recycling runs. Accordingly, the unique phase switching of this smart paper transformer enables Au nanosponge to transform into a highly efficient and cost-effective multifunctional catalyst. The paper transformer can support various nanocatalysts for a wide range of applications, thus providing a new insight into maintaining both high catalytic efficiency and reusability of nanocatalysts in the fields of environmental catalysis and nanomaterials.
more »
« less
- Award ID(s):
- 1827745
- NSF-PAR ID:
- 10160756
- Date Published:
- Journal Name:
- Chemical Science
- Volume:
- 11
- Issue:
- 11
- ISSN:
- 2041-6520
- Page Range / eLocation ID:
- 2915 to 2925
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
Electrochemical conversion of carbon dioxide (CO 2 ) to chemicals or fuels can effectively promote carbon capture and utilization, and reduce greenhouse gas emission but a serious impediment to the process is to find highly active electrocatalysts that can selectively produce desired products. Herein, we have established the design principles based on the density functional theory calculations to screen the most promising catalysts from the family of coordinately unsaturated/saturated transition metal (TM) embedded into covalent organic frameworks (TM-COFs). An intrinsic descriptor has been discovered to correlate the molecular structures of the active centers with both the activity and selectivity of the catalysts. Among all the catalysts, the coordinately unsaturated Ni-doped covalent triazine framework (Ni-CTF) is identified as one of the best electrocatalysts with the lowest overpotential (0.34 V) for CO 2 reduction toward CO while inhibiting the formation of the side products, H 2 and formic acid. Compared with coordinately saturated TM-COFs and noble metals ( e.g. Au and Ag), TM-CTFs exhibit higher catalytic activity and stronger inhibition of side products. The predictions are supported by previous experimental results. This study provides an effective strategy and predictive tool for developing desired catalysts with high activity and selectivity.more » « less
-
more » « less
Abstract Gold (Au)- and ceria (CeO2)-based catalysts are amongst the most active catalysts for the gas phase CO oxidation reaction. Nevertheless, nanosized Au and CeO2catalysts may encounter heat-induced sintering in thermochemical catalytic reactions. Herein, we report on the rational one-pot synthesis of ceria-reduced graphene oxide (CeO2-RGO) using a facile ethylenediamine (EDA)-assisted solvothermal method. Standalone RGO and free-standing CeO2were also prepared using the same EDA-assisted method for comparison. We then incorporated Au into the prepared samples by colloidal reduction and evaluated the catalytic activity of the different catalysts for CO oxidation. The RGO-supported CeO2surpassed the free-standing CeO2, exhibiting a 100% CO conversion at 285oC compared to 340oC in the case of CeO2. Interestingly, the RGO-supported Au/CeO2catalysts outperformed the Au/CeO2catalysts and achieved a 100% CO conversion at 76oC compared to 113oC in the case of Au/CeO2. Additionally, the Au/CeO2-RGO catalyst demonstrated remarkable room-temperature activity with simultaneous 72% CO conversion. This outstanding performance was attributed to the unique dispersion and size characteristics of the RGO-supported CeO2and Au catalysts in the ternary Au/CeO2-RGO nanocomposite, as revealed by TEM and XPS, among other techniques.
-
Understanding the origin of enhanced catalytic activity is critical to heterogeneous catalyst design. This is especially important for non-noble metal-based catalysts, notably metal oxides, which have recently emerged as viable candidates for numerous thermal catalytic processes. For thermal catalytic reduction/hydrogenation using metal oxide nanoparticles, enhanced catalytic performance is typically attributed to an increased surface area and the presence of oxygen vacancies. Concomitantly, the treatments that induce oxygen vacancies also impact other material properties, such as the microstrain, crystallinity, oxidation state, and particle shape. Herein, multivariate statistical analysis is used to disentangle the impact of material properties of CuO nanoparticles on catalytic rates for nitroaromatic and methylene blue reduction. The impact of the microstrain, shape, and Cu(0) atomic percent is demonstrated for these reactions; furthermore, a protocol for correlating material property parameters to catalytic efficiency is presented, and the importance of catalyst design for these broadly utilized probe reactions is highlighted.more » « less
-
Ethylene oxide (EO) is one of the most crucial materials in plastic industries. The traditional catalytic process requires high temperature and pressure to produce EO. A chlorine-assisted system has been reported to produce EO, but it required noble metal catalysts, which significantly increased the cost. In this work, a MOF-derived Co 3 O 4 /nitrogen-doped carbon composite (Co 3 O 4 /NC) prepared through a two-step calcination method exhibited remarkable chlorine evolution reaction (ClER) activity as compared with a commercial RuO 2 catalyst, which can be attributed to the higher specific surface area and lower resistance of its porous structure and nitrogen-doped carbon. Furthermore, the Co 3 O 4 /NC maintained a stable potential and a high faradaic efficiency throughout the 10-hour electrolysis test.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/c9sc05287a
