An official website of the United States government
Reimaging telescopes have an accessible exit pupil that facilitates stray light mitigation and matching to auxiliary optical systems. Freeform surfaces present the opportunity for unobscured reflective systems to be folded into geometries that are otherwise impracticable with conventional surface types. It is critical, however, to understand the limitations of the enabled folding geometries and choose the one that best balances the optical performance and mechanical requirements. Here, we used the aberration theory of freeform surfaces to determine the aberration correction potential for using freeform surfaces in reimaging three-mirror telescopes and established a hierarchy for the different folding geometries without using optimization. We found that when using freeform optics, the ideal folding geometry had 9× better wavefront performance compared to the next best geometry. Within that ideal geometry, the system using freeform optics had 39% better wavefront performance compared to a system using off-axis asphere surfaces, thus quantifying one of the advantages of freeform optics in this design space.
more »
« less
Effect of freeform surfaces on the volume and performance of unobscured three mirror imagers in comparison with off-axis rotationally symmetric polynomials
The invention of new design techniques for unobscured reflective systems using freeform surfaces has expanded the optical design space for these system types. We illustrate how the use of freeform surfaces can expand the design space of the Three Mirror Compact design type to allow both better performance at a given system volume and smaller volumes for a given performance target. By evolving designs using conventional off-axis asphere type surfaces to ever smaller volumes and then converting these off-axis asphere descriptions to centered Zernike descriptions, we show that the wavefront error improves by up to 69% in this case by allowing the surfaces to break rotational symmetry. In addition, we show that evolving designs from the same starting point as the off-axis asphere designs but instead using a centered Zernike description can produce a design with a 39% smaller volume in this case while maintaining the same diffraction-limited performance. © 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
more »
« less
- PAR ID:
- 10161181
- Date Published:
- Journal Name:
- Optics express
- Volume:
- 27
- Issue:
- 15
- ISSN:
- 1094-4087
- Page Range / eLocation ID:
- 21750-21765
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
When leveraging orthogonal polynomials for describing freeform optics, designers typically focus on the computational efficiency of convergence and the optical performance of the resulting designs. However, to physically realize these designs, the freeform surfaces need to be fabricated and tested. An optimization constraint is described that allows on-the-fly calculation and constraint of manufacturability estimates for freeform surfaces, namely peakto- valley sag departure and maximum gradient normal departure. This constraint’s construction is demonstrated in general for orthogonal polynomials, and in particular for both Zernike polynomials and Forbes 2D-Q polynomials. Lastly, this optimization constraint’s impact during design is shown via two design studies: a redesign of a published unobscured three-mirror telescope in the ball geometry for use in LWIR imaging and a freeform prism combiner for use in AR/VR applications. It is shown that using the optimization penalty with a fixed number of coefficients enables an improvement in manufacturability in exchange for a tradeoff in optical performance. It is further shown that, when the number of coefficients is increased in conjunction with the optimization penalty, manufacturability estimates can be improved without sacrificing optical performance. © 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreementmore » « less
-
Driven by the development of freeform imaging systems, we have combined several concepts and techniques from the literature to analytically generate unobscured freeform starting point designs that are corrected through the third-order image degrading aberrations. The surfaces used in these starting point designs are described as a base off-axis conic that images stigmatically for the central field point, also known as a Cartesian reflector, with an aspheric departure “cap” (quartic with the aperture) added to the base off-axis conic to correct for the third-order image degrading aberrations. Once the aspheric caps are added to the surfaces, the system is then optimized using higher order freeform terms while leaving second-order terms frozen to preserve the focal length of the system during optimization. This technique is used to survey the three-mirror freeform imager solution space. Several systems that are the result of this technique are shown, with different numbers of internal images, internal pupil conjugates and folding geometries.more » « less
-
There are a variety of common situations in which specification of a onedimensional modulation transfer function (MTF) or two orthogonal profiles of the 2D MTF are not adequate descriptions of the image quality performance of an optical system. These include systems with an asymmetric on-axis impulse response, systems with off-axis aberrations, systems with surfaces that include mid-spatial frequency errors, and freeform systems. In this paper, we develop the concept of the Minimum Modulation Curve (MMC). Starting with the two-dimensional MTF in polar form, the minimum MTF for any azimuth angle is plotted as a function of the radial spatial frequency. This can be presented in a familiar form similar to an MTF curve and is useful in the context of guaranteeing that a given MTF specification is met for any possible orientation of spatial frequencies in the image. In this way, an MMC may be of value in specifying the required performance of an optical system. We illustrate application of the MMC using profile data for surfaces with midspatial frequency errors. © 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreementmore » « less
-
When using freeform surfaces in optical design, the field dependence of the aberrations can become quite complex, and understanding these aberrations facilitates the design process. Here we calculate the field dependence of low-order Zernike astigmatism (Z5/6) up to the eighth order in nodal aberration theory (NAT). Expansion of NAT astigmatism terms to the eighth order facilitates a more accurate fit to the Zernike astigmatism data. We then show how this estimated field dependence can be used to quantitatively analyze a freeform telescope design. This analysis tool adds to the optical designer’s arsenal when up against the challenge of designing with freeform optics. ©2019 Optical Society of America https://doi.org/10.1364/JOSAA.36.002115more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1364/OE.27.021750
