Cp*Ir( iii ) complexes have been shown to be effective for the halogenation of N , N -diisopropylbenzamides with N -halosuccinimide as a suitable halogen source. The optimized conditions for the iodination reaction consist of 0.5 mol% [Cp*IrCl 2 ] 2 in 1,2-dichloroethane at 60 °C for 1 h to form a variety of iodinated benzamides in high yields. Increasing the catalyst loading to 6 mol% and the time to 4 h enabled the bromination reaction of the same substrates. Reactivity was not observed for the chlorination of these substrates. A variety of functional groups on the para -position of the benzamide were well tolerated. Kinetic studies showed the reaction dependence is first order in iridium, positive order in benzamide, and zero order in N -iodosuccinimide. A KIE of 2.5 was obtained from an independent H/D kinetic isotope effect study. Computational studies (DFT-BP3PW91) indicate that a CMD mechanism is more likely than an oxidative addition pathway for the C–H bond activation step. The calculated functionalization step involves an Ir( v ) species that is the result of oxidative addition of acetate hypoiodite that is generated in situ from N -iodosuccinimide and acetic acid.
more »
« less
Mechanistic details of the cobalt-mediated dehydrogenative dimerization of aminoquinoline-directed benzamides
Key mechanistic features of the cobalt-mediated and aminoquinoline-directed dehydrogenative aryl–aryl coupling were investigated computationally and experimentally. A series of Co II and Co III complexes relevant to the proposed reaction cycle have been synthesized and characterized. Stoichiometric reactions and electrochemical studies were used to probe the role of different additives in the reaction pathway. Computationally, three different mechanisms, such as charge neutral , anionic , and dimetallic were explored. It is shown that the mono-metallic anionic and charge neutral mechanisms are the most favorable ones, among which the former mechanism is slightly more encouraging and proceeds via the: (a) concerted-metalation-deprotonation (CMD) of the first benzamide C–H bond, (b) PivOH-to-PivO − rearrangement, (c) CMD of the second benzamide C–H bond, (d) C–C coupling, (e) product formation facilitated by the amide nitrogen re-protonation, and (f) catalyst regeneration. The rate-determining step of this multi-step process is the C–C coupling step. The computational studies suggest that the electronics of both the aryl-benzamide and pyridine fragments of the aminoquinoline-benzamide ligand control the efficiency of the reaction.
more »
« less
- Award ID(s):
- 1700982
- NSF-PAR ID:
- 10163612
- Date Published:
- Journal Name:
- Chemical Science
- Volume:
- 11
- Issue:
- 23
- ISSN:
- 2041-6520
- Page Range / eLocation ID:
- 6085 to 6096
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Palladium catalyzed cross-coupling reactions represent a significant advancement in contemporary organic synthesis as these reactions are of strategic importance in the area of pharmaceutical drug discovery and development. Supported palladium-based catalysts are highly sought-after in carbon–carbon bond forming catalytic processes to ensure catalyst recovery and reuse while preventing product contamination. This paper reports the development of heterogeneous Pd-based bimetallic catalysts supported on fumed silica that have high activity and selectivity matching those of homogeneous catalysts, eliminating the catalyst's leaching and sintering and allowing efficient recycling of the catalysts. Palladium and base metal (Cu, Ni or Co) contents of less than 1.0 wt% loading are deposited on a mesoporous fumed silica support (surface area SA BET = 350 m 2 g −1 ) using strong electrostatic adsorption (SEA) yielding homogeneously alloyed nanoparticles with an average size of 1.3 nm. All bimetallic catalysts were found to be highly active toward Suzuki cross-coupling (SCC) reactions with superior activity and stability for the CuPd/SiO 2 catalyst. A low CuPd/SiO 2 loading (Pd: 0.3 mol%) completes the conversion of bromobenzene and phenylboronic acid to biphenyl in 30 minutes under ambient conditions in water/ethanol solvent. In contrast, monometallic Pd/SiO 2 (Pd: 0.3 mol%) completes the same reaction in three hours under the same conditions. The combination of Pd with the base metals helps in retaining the Pd 0 status by charge donation from the base metals to Pd, thus lowering the activation energy of the aryl halide oxidative addition step. Along with its exceptional activity, CuPd/SiO 2 exhibits excellent recycling performance with a turnover frequency (TOF) of 280 000 h −1 under microwave reaction conditions at 60 °C. Our study demonstrates that SEA is an excellent synthetic strategy for depositing ultra-small Pd-based bimetallic nanoparticles on porous silica for SCC. This avenue not only provides highly active and sintering-resistant catalysts but also significantly lowers Pd contents in the catalysts without compromising catalytic activity, making the catalysts very practical for large-scale applications.more » « less
-
more » « less
Abstract A modular platform for facile access to 1,2,3,9‐tetrahydro‐4
H ‐carbazol‐4‐ones (H4‐carbazolones) and 3,4‐dihydrocyclopenta[b ]indol‐1(2H )‐ones (H2‐indolones) is described. The requisite 6‐ and 5‐membered 2‐arylcycloalkane‐1,3‐dione precursors were readily obtained through a Cu‐catalyzed arylation of 1,3‐cyclohexanediones or by a ring expansion of aryl succinoin derivatives. Enolization of one carbonyl group in the diones, conversion to a leaving group, and subsequent azidation gave 2‐aryl‐3‐azidocycloalk‐2‐en‐1‐ones. This two‐step, one‐pot azidation is highly regioselective with unsymmetrically substituted 2‐arylcyclohexane‐1,3‐diones. The regioselectivity, which is important for access to single isomers of 3,3‐disubstituted carbazolones, was analyzed mechanistically and computationally. Finally, a Rh‐catalyzed nitrene/nitrenoid insertion into theortho C−H bond of the aryl moiety gave the H4‐carbazolones and H2‐indolones. One carbazolone was elaborated to an intermediate reported in the total synthesis ofN ‐decarbomethoxychanofruticosinate, (−)‐aspidospermidine, (+)‐kopsihainanine A. With 2‐phenylcycloheptane‐1,3‐dione, prepared from cyclohexanone and benzaldehyde, the azidation reaction was readily accomplished. However, the Rh‐catalyzed reaction unexpectedly led to a labile but characterizable azirine rather than the indole derivative. Computations were performed to understand the differences in reactivities of the 5‐ and 6‐membered 2‐aryl‐3‐azidocycloalk‐2‐en‐1‐ones in comparison to the 7‐membered analogue, and to support the structural assignment of the azirine. -
more » « less
Abstract Paired redox‐neutral electrolysis offers an attractive green platform for organic synthesis by avoiding sacrificial oxidants and reductants. Carboxylates are non‐toxic, stable, inexpensive, and widely available, making them ideal nucleophiles for C−C cross‐coupling reactions. Here, we report the electro/Ni dual‐catalyzed redox‐neutral decarboxylative C(sp3)−C(sp2) cross‐coupling reactions of pristine carboxylates with aryl bromides. At a cathode, a NiII(Ar)(Br) intermediate is formed through the activation of Ar−Br bond by a NiI‐bipyridine catalyst and subsequent reduction. At an anode, the carboxylates, including amino acid, benzyl carboxylic acid, and 2‐phenoxy propionic acid, undergo oxidative decarboxylation to form carbon‐based free radicals. The combination of NiII(Ar)(Br) intermediate and carbon radical results in the formation of C(sp3)−C(sp2) cross‐coupling products. The adaptation of this electrosynthesis method to flow synthesis and valuable molecule synthesis was demonstrated. The reaction mechanism was systematically studied through electrochemical voltammetry and density functional theory (DFT) computational studies. The relationships between the electrochemical properties of carboxylates and the reaction selectivity were revealed. The electro/Ni dual‐catalyzed cross‐coupling reactions described herein expand the chemical space of paired electrochemical C(sp3)−C(sp2) cross‐coupling and represent a promising method for the construction of the C(sp3)−C(sp2) bonds because of the ubiquitous carboxylate nucleophiles and the innate scalability and flexibility of electrochemical flow‐synthesis technology.
-
more » « less
Abstract Pincer‐type nickel–aluminum complexes were synthesized using two equivalents of the phosphinoamide, [PhNCH2PiPr2]−. The Ni0–AlIIIcomplexes, {(MesPAlP)Ni}2(μ‐N2) and {(MesPAlP)Ni}2(μ‐COD), whereMesPAlP is (Mes)Al(NPhCH2PiPr2)2, were structurally characterized. The (PAlP)Ni system exhibited cooperative bond cleavage mediated by the two‐site Ni–Al unit, including oxidative addition of aryl halides, H2activation, and ortho‐directed C−H bond activation of pyridine N‐oxide. One intriguing reaction is the reversible intramolecular transfer of the mesityl ring from the Al to the Ni site, which is evocative of the transmetalation step during cross‐coupling catalysis. The aryl‐transfer product,(THF)Al(NPhCH2PiPr2)2Ni(Mes), is the first example of a first‐row transition metal–aluminyl pincer complex. The addition of a judicious donor enables the Al metalloligand to convert reversibly between the alane and aluminyl forms via aryl group transfer to and from Ni, respectively. Theoretical calculations support a zwitterionic Niδ−–Alδ+electronic structure in the nickel–aluminyl complex.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D0SC02066D
