skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: On structural models for ionic polymer metal composites (SPIE Best Student Paper Finalist)
Ionic polymer metal composites (IPMCs) are a class of soft electroactive polymers. IPMCs comprise a soft ionic polymer core, on which two stiff metal electrodes are plated. These active materials exhibit large bend- ing upon the application of a small driving voltage across their electrodes, in air or in aqueous environments. In a recent work, we presented compelling theoretical and numerical evidence suggesting that ionic polymer membranes exhibit complex multiaxial deformations neglected by reduced-order structural models. Where most beam theories (including Euler-Bernoulli, Timoshenko, and most higher-order shear deformation models) would suggest vanishing through-the-thickness deformation, we discover the onset of localized deformation that rever- berates into axial stretching. Building upon this effort, here we investigate the role of the electrodes and shear on multiaxial deformations of IPMCs. We establish a novel structural theory for IPMCs, based on the Euler- Bernoulli kinematics enriched with the through-the-thickness deformation in the ionic polymer, computed from a Saint-Venant-like problem for uniform bending. While considering boundary conditions that elicit non-uniform bending, we compare the results of this model against classical Euler-Bernoulli beam theory without enrichment and finite element simulations, encapsulating the nonlinear response of the material. We demonstrate that our theory can predict the macroscopic displacement of the IPMC, along with the localized deformation in the ionic polymer at the interface with the electrodes, which are not captured by the classical Euler-Bernoulli beam theory. This work paves the way to the development of more sophisticated structural theories for IPMCs and analogous active materials, affording an accurate description of deformations at a limited computational cost.  more » « less
Award ID(s):
1545857
PAR ID:
10165756
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
SPIE Smart Structures + Nondestructive Evaluation, Electroactive Polymer Actuators and Devices (EAPAD) XXII
Volume:
11275
Page Range / eLocation ID:
39
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Journal of Elasticity)
    Ionic polymer metal composites (IPMCs) are soft electroactive materials that are finding increasing use as actuators in several engineering domains, where there is a need of large compliance and low activation voltage. Similar to traditional sandwich structures, an IPMC comprises a hydrated ionomer core that is sandwiched by two stiffer electrodes. The application of a voltage across the electrodes drives charge migration within the ionomer, which, in turn, contributes to the development of an eigenstress, associated with osmotic pressure and Maxwell stress. Critical to IPMC actuation is the variation of the eigenstress through the thickness of the ionomer, which is responsible for strain localization at the ionomer-electrode interfaces. Despite considerable progress in the development of reliable continuum theories and finite element tools, accurate structural theories that could beget physical insight into the inner workings of IPMC actuation are lacking. Here, we seek to bridge this gap by contributing a principled methodology to structural modeling of IPMC actuation. Our approach begins with the study of the IPMC electrochemistry through the method of matched asymptotic expansions, which yields a semi-analytical expression for the eigenstress as a function of the applied voltage. Hence, we establish a total potential energy that accounts for the strain energy of the ionomer, the strain energy of the electrodes, and the work performed by the eigenstress. By projecting the IPMC kinematics on select beam-like representations and imposing the stationarity of the total potential energy, we formulate rigorous structural theories for IPMC actuation. Not only do we examine classical low-order and higher-order beam theories, but we also propose enriched theories that account for strain localization near the electrodes. The accuracy of these theories is assessed through comparison with finite element simulations on a plane-strain problem of non-uniform bending. Our results indicate that an enriched Euler-Bernoulli beam theory, with three independent field variables, is successful in capturing the main features of IPMC actuation at a limited computational cost. 
    more » « less
  2. ; ; ; (, Forests)
    Strands produced from small-diameter timbers of lodgepole and ponderosa pine were used to fabricate a composite sandwich structure as a replacement for traditional building envelope materials, such as roofing. It is beneficial to develop models that are verified to predict the behavior of these sandwich structures under typical service loads. When used for building envelopes, these structural panels are subjected to bending due to wind, snow, live, and dead loads during their service life. The objective of this study was to develop a theoretical and a finite element (FE) model to evaluate the elastic bending behavior of the wood-strand composite sandwich panel with a biaxial corrugated core. The effect of shear deformation was shown to be negligible by applying two theoretical models, the Euler–Bernoulli and Timoshenko beam theories. Tensile tests were conducted to obtain the material properties as inputs into the models. Predicted bending stiffness of the sandwich panels using Euler-Bernoulli, Timoshenko, and FE models differed from the experimental results by 3.6%, 5.2%, and 6.5%, respectively. Using FE and theoretical models, a sensitivity analysis was conducted to explore the effect of change in bending stiffness due to intrinsic variation in material properties of the wood composite material. 
    more » « less
  3. ; (, Proceedings of the ASME 2023 International Mechanical Engineering Congress and Exposition)
    Abstract This study explores the mechanical interactions between surgical needles and soft tissues during procedures like biopsies and brachytherapy. A key challenge is needle tip deflection, which can cause deviation from the intended target. The study aims to develop an analytical model that predicts needle tip deflection during insertion by combining principles from interfacial mechanics and soft tissue deformation. A modified version of the dynamic Euler-Bernoulli beam theory is employed to model needle insertion and predict needle tip deflection. The model’s predictions are then compared to experimental data obtained from needle insertions in real tissues. The research aims to deepen our understanding of needle-tissue interactions and develop a reliable model for predicting needle deflection, ultimately enhancing surgical robots and navigation systems for safer and more precise percutaneous procedures. Pig organs are used as a material data source for a viscoelastic model, simulating needle insertion into kidney-like environments and analyzing organ deformation. The modified Euler-Bernoulli beam theory considers the viscoelastic properties of the tissue. Deflection is then calculated and compared to experimental data, with analytical deflection measurements exhibiting a 5–10% difference compared to experimental results. 
    more » « less
  4. ; (, Soft Matter)
    null (Ed.)
    In recent years, there has been an increasing interest in the research in soft actuators that exhibit complex programmable deformations. Soft electrothermal actuators use electricity as the stimulus to generate heat, and the mismatch between the thermal expansions of the two structural layers causes the actuator to bend. Complex programmable deformations of soft electrothermal actuators are difficult due to the limitations of the conventional fabrication methods. In this article, we report a new approach to fabricate soft electrothermal actuators, in which the resistive heater of the electrothermal actuator is directly printed using electrohydrodynamic (EHD) printing. The direct patterning capabilities of EHD printing allow the free-form design of the heater. By changing the design of the heating pattern on the actuator, different heat distributions can be achieved and utilized to realize complex programmable deformations, including uniform bending, customized bending, folding, and twisting. Finite element analysis (FEA) was used to validate the thermal distribution and deformation for different actuator designs. Lastly, several integrated demonstrations are presented, including complex structures obtained from folding, a two-degree-of-freedom soft robotic arm, and soft walkers. 
    more » « less
  5. ; ; ; ; (, Electroactive Polymer Actuators and Devices (EAPAD) XXIV)
    The soft and compliant nature of ionic polymer-metal composite (IPMC) sensors has recently been investigated for various applications in soft robotic and mechatronic devices. Recent results of physics-based chemoelectromechanical modeling suggest that IPMC asymmetric surface roughening may enhance the sensitivity under compression. This paper presents initial experimental results on IPMC compression sensors fabricated with varying degrees of asymmetric surface roughness. The roughness is created through a simple mechanical sanding process on the base polymer material, referred to as "polymer abrading technique'", followed by traditional electroless plating to create electrodes. Sample sensors are characterized by measuring the voltage response under different compressive loads. The results show consistently increased sensor sensitivity of the asymmetrically roughened IPMCs versus a control sample. Sensitivity increases non-monotonically with rougher electrode surfaces, where maximum sensitivity of about 0.0433 mV/kPa is achieved with sensor electrodes with 53-74~micrometer abrasions. More variability is also observed through augmented electrode roughness, suggesting greater flexibility for IPMC sensor design. These results align with predictions from the existing physics-based chemoelectromechanical model. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email