skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Real-Time Deployment Aspects of C-Band and Millimeter-Wave 5G-NR Systems
Fifth-generation (5G) new radio (NR) deployments are being rolled out in both the C–band (3.3 - 5.0 GHz) and millimeter-wave (mmWave) band (24.5 - 29.5 GHz). For outdoor scenarios, the C–band is expected to provide wide area coverage and throughput uniformity, whereas the mmWave band is expected to provide ultra-high throughput to dedicated areas within the C-band coverage. Due to the differences in the frequency bands, both systems are expected to be designed with different transmit and receive parameters, naturally resulting in performance variations proportional to the chosen parameters. Unlike many previous works, this paper presents measurement evaluations in central Auckland, New Zealand, from a precommercial deployment of a single-user, single-cell 5G-NR system operating in both bands. The net throughput, coverage reliability, and channel rank are analyzed across the two bands with baseband and analog beamforming. Our results show that the C-band coverage is considerably better than mmWave, with a consistently higher channel rank. Furthermore, the spatial stationarity region (SSR) for the azimuth angles-of-departure (AODs) is characterized, and a model derived from the measured beam identities is presented. The SSR of azimuth AODs is seen to closely follow a gamma distribution.  more » « less
Award ID(s):
1618078
PAR ID:
10165862
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
IEEE International Conference on Communications
ISSN:
1938-1883
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Proceedings of IEEE VTC 2020 Fall)
    The extremely high data rates provided by communications in the millimeter-length (mmWave) frequency bands can help address the unprecedented demands of next-generation wireless communications. However, atmospheric attenuation and high propagation loss severely limit the coverage of mmWave networks. To overcome these challenges, multi-input-multi-output (MIMO) provides beamforming capabilities and high-gain steer- able antennas to expand communication coverage at mmWave frequencies. The main contribution of this paper is the per- formance evaluation of mmWave communications on top of the recently released NR standard for 5G cellular networks. Furthermore, we compare the performance of NR with the 4G long-term evolution (LTE) standard on a highly realistic campus environment. We consider physical layer constraints such as transmit power, ambient noise, receiver noise figure, and practical antenna gain in both cases, and examine bitrate and area coverage as the criteria to benchmark the performance. We also show the impact of MIMO technology to improve the performance of the 5G NR cellular network. Our evaluation demonstrates that 5G NR provides on average 6.7 times bitrate improvement without remarkable coverage degradation. 
    more » « less
  2. ; ; ; (, IET Communications)
    Abstract Low latency beamforming using phased antenna arrays is the key for practical deployment of envisioned millimetre wave (mmWave) Gbps mobile networks. This work aims towards reducing the overhead of the exhaustive sector‐level sweep phase of the analog beamforming adopted in the IEEE 802.11ad standard. This work is the first to propose the use of reconfigurable antenna single RF chain in the sub‐6 GHz new radio (NR) band to aid codebook‐based beam selection in the mmWave band of the NR. We exploit the congruence between the spatial propagation signatures of signals at both mmWave and sub‐6 GHz frequencies to reduce the beam search space. The simulation results show a significant reduction in mmWave beam search overhead up to on average and with an average gain loss of 3dB. 
    more » « less
  3. (, IEEE Vehicular Technology Conference)
    Abstract—Millimeter wave wireless spectrum deployments will allow vehicular communications to share high data rate vehicular sensor data in real-time.The highly directional nature of wireless links in millimeter spectral bands will require continuous channel measurements to ensure the transmitter (TX) and receiver (RX) beams are aligned to provide the best channel. Using real-world vehicular mmWave measurement data at 28GHz, we determine the optimal beam sweeping period, i.e. the frequency of the channel measurements,to align the RX beams to the best channel directions for maximizing the vehicle-to-infrastructure (V2I) throughput.We show that in a realistic vehicular traffic environment in Austin,TX, for a vehicle traveling at an average speed of 10.5mph,a beam sweeping period of 300 ms in future V2I communication standards would maximize theV2I throughput,using a system of four RX phased arrays that scanned the channel 360 degrees in the azimuth and 30 degrees above and below the boresight.We also investigate the impact of the number of active RX chains controlling the steerable phased arrays on V2I throughput. Reducing the number of RX chains controlling the phased arrays helps reduce the cost of the vehicular mmWave hardware while multiple RX chains, although more expensive,provide more robustness to beam direction changes at the vehicle,allowing near maximum throughput over a wide range of beam sweep periods.We show that the overhead of utilizing one RX chain instead of four leads to a10% drop in mean V2I throughput over six non-line- of-sight runs in real traffic conditions, with each run being 10 to 20 seconds long over a distance of 40 to 90 meters. Index Terms—mmWave;beam management;channel sound- ing; phased arrays;V2X;V2V;5G;sidelink 
    more » « less
  4. (, IEEE communications magazine)
    Telecommunication industries and spectrum regulation authorities are increasingly interested in unlocking the 12 GHz band for two-way 5G terrestrial services. The 12 GHz band has a much larger bandwidth than the current sub-6 GHz band and better propagation characteristics than the millimeter wave (mmWave) band. Thus, the 12 GHz band offers great potential for improving the coverage and capacity of terrestrial 5G networks. However, interference issues between incumbent receivers and 5G radio links present a major challenge in the 12 GHz band. If one could exploit the dynamic contexts inherent to the 12 GHz band, one could reform spectrum sharing policy to create spectrum access opportunities for 5G mobile services. This article makes three contributions. First, it presents the characteristics and challenges of the 12 GHz band. Second, we explain the characteristics and requirements for spectrum sharing at a variety of levels to resolve those issues. Lastly, we present several research opportunities to enable harmonious coexistence of incumbent licensees and 5G networks within the 12 GHz band. 
    more » « less
  5. ; ; (, IEEE Vehicular Technology Conference (VTC) workshop on 5G Millimeter-Wave Channel Measurement, Models, and Systems)
    Communication at mmWave bands carries critical importance for 5G wireless networks. In this paper, we study the characterization of mmWave air-to-ground (AG) channels for unmanned aerial vehicle (UAV) communications. In particular, we use ray tracing simulations using Remcom Wireless InSite software to study the behavior of AG mmWave bands at two different frequencies: 28 GHz and 60 GHz. Received signal strength (RSS) and root mean square delay spread (RMS-DS) of multipath components (MPCs) are analyzed for different UAV heights considering four different environments: urban, suburban, rural, and over sea. It is observed that the RSS mostly follows the two ray propagation model along the UAV flight path for higher altitudes. This two ray propagation model is affected by the presence of high rise scatterers in urban scenario. Moreover, we present details of a universal serial radio peripheral (USRP) based channel sounder that can be used for AG channel measurements for mmWave (60 GHz) UAV communications. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email