skip to main content


Title: Variable Topology “Tree-Like” Continuum Robots for Remote Inspection and Cleaning
We discuss a novel variable topology continuum robot designed and constructed under NASA-funded research. The robot features a seven degree of freedom continuous backbone “trunk”, with two pairs of “branches”: two “tendril” effectors and two support “roots”. Each of the pairs of branches can be fully retracted inside the trunk, allowing it to penetrate congested environments as a single slender unit, and subsequently deploy the branches to perform a variety of tasks. The “roots” provide physical support, while the two effectors and trunk tip enable independent but coordinated functionality: sensing (vision) in one tendril, and manipulation at two scales, via the second tendril and the trunk tip. The specifics of the new design are described and discussed in detail. We illustrate the operation and potential applications of the new design via a series of demonstrations, particularly cleaning of dust from solar panels.  more » « less
Award ID(s):
1718075
NSF-PAR ID:
10169568
Author(s) / Creator(s):
Date Published:
Journal Name:
IEEE Aerospace Conference
Page Range / eLocation ID:
1-10
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. This paper studies two classes of variational problems introduced in Bressan and Sun (On the optimal shape of tree roots and branches. arXiv:1803.01042), related to the optimal shapes of tree roots and branches. Given a measure μ describing the distribution of leaves, a sunlight functional S(μ) computes the total amount of light captured by the leaves. For a measure μ describing the distribution of root hair cells, a harvest functional H(μ) computes the total amount of water and nutrients gathered by the roots. In both cases, we seek a measure μ that maximizes these functionals subject to a ramified transportation cost, for transporting nutrients from the roots to the trunk or from the trunk to the leaves. Compared with Bressan and Sun, here we do not impose any a priori bound on the total mass of the optimal measure μ, and more careful a priori estimates are thus required. In the unconstrained optimization problem for branches, we prove that an optimal measure exists, with bounded support and bounded total mass. In the unconstrained problem for tree roots, we prove that an optimal measure exists, with bounded support but possibly unbounded total mass. The last section of the paper analyzes how the size of the optimal tree depends on the parameters defining the various functionals. 
    more » « less
  2. Abstract

    Using visible‐range and infrared (3–5 μm) high‐speed video cameras, we observed luminosity transients that reilluminated decayed branches of two close (2 to 4 km) negative stepped leaders in Florida. Leader branches were energized via stepping at their tips and, as a result, were most heated near their lower ends, with the hotter sections being connected via cooler sections to the trunk. In the modeling of lightning leaders, usually a single tip is considered. In contrast, in the present study, many (up to 30 per major branch) tips were active at the same time, forming a network‐like structure with a descending multitip “ionization front” whose transverse dimensions were of the order of hundreds of meters. The front exhibited alternating stepping, with each step necessarily generating a positive charge wave traveling from the leader tip up along the channel, like a mini return stroke. We inferred that the step‐related waves can cause luminosity transients in the remnants of decayed negative branches at higher altitudes. Such reactivated branches, in turn, may facilitate further leader stepping at lower altitudes, as first reported by Stolzenburg et al. (2015,https://doi.org/10.1002/2014JD022933). The reactivation process is likely to involve multiple steps, as evidenced by a large number of active tips (some tens per 50‐μs frame) and corresponding electric field pulses occurring at time intervals of 2 μs or less. Additionally, our observations suggest that a transient in one decayed branch can trigger (or assist with triggering of) a transient in another branch.

     
    more » « less
  3. null (Ed.)
    This paper introduces two classes of variational problems, determining optimal shapes for tree roots and branches. Given a measure [Formula: see text], describing the distribution of leaves, we introduce a sunlight functional [Formula: see text] computing the total amount of light captured by the leaves. On the other hand, given a measure [Formula: see text] describing the distribution of root hair cells, we consider a harvest functional [Formula: see text] computing the total amount of water and nutrients gathered by the roots. In both cases, we seek to maximize these functionals subject to a ramified transportation cost, for transporting nutrients from the roots to the trunk and from the trunk to the leaves. The main results establish various properties of these functionals, and the existence of optimal distributions. In particular, we prove the upper semicontinuity of [Formula: see text] and [Formula: see text], together with a priori estimates on the support of optimal distributions. 
    more » « less
  4. Novel species of fungi described in this study include those from various countries as follows: Antartica , Cladosporium austrolitorale from coastal sea sand. Australia , Austroboletus yourkae on soil, Crepidotus innuopurpureus on dead wood, Curvularia stenotaphri from roots and leaves of Stenotaphrum secundatum and Thecaphora stajsicii from capsules of Oxalis radicosa. Belgium , Paraxerochrysium coryli (incl. Paraxerochrysium gen. nov.) from Corylus avellana. Brazil , Calvatia nordestina on soil, Didymella tabebuiicola from leaf spots on Tabebuia aurea, Fusarium subflagellisporum from hypertrophied floral and vegetative branches of Mangifera indica and Microdochium maculosum from living leaves of Digitaria insularis. Canada , Cuphophyllus bondii fromagrassland. Croatia , Mollisia inferiseptata from a rotten Laurus nobilis trunk. Cyprus , Amanita exilis oncalcareoussoil. Czech Republic , Cytospora hippophaicola from wood of symptomatic Vaccinium corymbosum. Denmark , Lasiosphaeria deviata on pieces of wood and herbaceousdebris. Dominican Republic , Calocybella goethei among grass on a lawn. France (Corsica) , Inocybe corsica onwetground. France (French Guiana) , Trechispora patawaensis on decayed branch of unknown angiosperm tree and Trechispora subregularis on decayed log of unknown angiosperm tree. Germany , Paramicrothecium sambuci (incl. Paramicrothecium gen. nov.)ondeadstemsof Sambucus nigra. India , Aureobasidium microtermitis from the gut of a Microtermes sp. termite, Laccaria diospyricola on soil and Phylloporia tamilnadensis on branches of Catunaregam spinosa . Iran , Pythium serotinoosporum from soil under Prunus dulcis. Italy , Pluteus brunneovenosus on twigs of broad leaved trees on the ground. Japan , Heterophoma rehmanniae on leaves of Rehmannia glutinosa f. hueichingensis. Kazakhstan , Murispora kazachstanica from healthy roots of Triticum aestivum. Namibia , Caespitomonium euphorbiae (incl. Caespitomonium gen. nov.)from stems of an Euphorbia sp. Netherlands , Alfaria junci, Myrmecridium junci, Myrmecridium juncicola, Myrmecridium juncigenum, Ophioceras junci, Paradinemasporium junci (incl. Paradinemasporium gen. nov.), Phialoseptomonium junci, Sporidesmiella juncicola, Xenopyricularia junci and Zaanenomyces quadripartis (incl. Zaanenomyces gen. nov.), fromdeadculmsof Juncus effusus, Cylindromonium everniae and Rhodoveronaea everniae from Evernia prunastri, Cyphellophora sambuci and Myrmecridium sambuci from Sambucus nigra, Kiflimonium junci, Saro cladium junci, Zaanenomyces moderatricis academiae and Zaanenomyces versatilis from dead culms of Juncus inflexus, Microcera physciae from Physcia tenella, Myrmecridium dactylidis from dead culms of Dactylis glomerata, Neochalara spiraeae and Sporidesmium spiraeae from leaves of Spiraea japonica, Neofabraea salicina from Salix sp., Paradissoconium narthecii (incl. Paradissoconium gen. nov.)from dead leaves of Narthecium ossifragum, Polyscytalum vaccinii from Vaccinium myrtillus, Pseudosoloacrosporiella cryptomeriae (incl. Pseudosoloacrosporiella gen. nov.)fromleavesof Cryptomeria japonica, Ramularia pararhabdospora from Plantago lanceolata, Sporidesmiella pini from needles of Pinus sylvestris and Xenoacrodontium juglandis (incl. Xenoacrodontium gen. nov. and Xenoacrodontiaceae fam. nov.)from Juglans regia . New Zealand , Cryptometrion metrosideri from twigs of Metrosideros sp., Coccomyces pycnophyllocladi from dead leaves of Phyllocladus alpinus, Hypoderma aliforme from fallen leaves Fuscopora solandri and Hypoderma subiculatum from dead leaves Phormium tenax. Norway , Neodevriesia kalakoutskii from permafrost and Variabilispora viridis from driftwood of Picea abies. Portugal , Entomortierella hereditatis from abio film covering adeteriorated limestone wall. Russia , Colpoma junipericola from needles of Juniperus sabina, Entoloma cinnamomeum on soil in grasslands, Entoloma verae on soil in grasslands, Hyphodermella pallidostraminea on a dry dead branch of Actinidia sp., Lepiota sayanensis onlitterinamixedforest, Papiliotrema horticola from Malus communis , Paramacroventuria ribis (incl. Paramacroventuria gen. nov.)fromleaves of Ribes aureum and Paramyrothecium lathyri from leaves of Lathyrus tuberosus. South Africa , Harzia combreti from leaf litter of Combretum collinum ssp. sulvense, Penicillium xyleborini from Xyleborinus saxesenii , Phaeoisaria dalbergiae from bark of Dalbergia armata, Protocreopsis euphorbiae from leaf litter of Euphorbia ingens and Roigiella syzygii from twigs of Syzygium chordatum . Spain , Genea zamorana on sandy soil, Gymnopus nigrescens on Scleropodium touretii, Hesperomyces parexochomi on Parexochomus quadriplagiatus, Paraphoma variabilis from dung, Phaeococcomyces kinklidomatophilus from a blackened metal railing of an industrial warehouse and Tuber suaveolens in soil under Quercus faginea. Svalbard and Jan Mayen , Inocybe nivea associated with Salix polaris. Thailand , Biscogniauxia whalleyi oncorticatedwood. UK , Parasitella quercicola from Quercus robur. USA , Aspergillus arizonicus from indoor air in a hospital, Caeliomyces tampanus (incl. Caeliomyces gen. nov.)fromoffice dust, Cippumomyces mortalis (incl. Cippumomyces gen. nov.)fromatombstone, Cylindrium desperesense from air in a store, Tetracoccosporium pseudoaerium from air sample in house, Toxicocladosporium glendoranum from air in a brick room, Toxicocladosporium losalamitosense from air in a classroom, Valsonectria portsmouthensis from airinmen'slockerroomand Varicosporellopsis americana from sludge in a water reservoir. Vietnam , Entoloma kovalenkoi on rotten wood, Fusarium chuoi inside seed of Musa itinerans , Micropsalliota albofelina on soil in tropical evergreen mixed forest sand Phytophthora docyniae from soil and roots of Docynia indica. Morphological and culture characteristics are supported by DNA barcodes. 
    more » « less
  5. null (Ed.)
    Pneumatically operated soft growing robots that extend via tip eversion are well-suited for navigation in confined spaces. Adding the ability to interact with the environment using sensors and tools attached to the robot tip would greatly enhance the usefulness of these robots for exploration in the field. However, because the material at the tip of the robot body continually changes as the robot grows and retracts, it is challenging to keep sensors and tools attached to the robot tip during actuation and environment interaction. In this paper, we analyze previous designs for mounting to the tip of soft growing robots, and we present a novel device that successfully remains attached to the robot tip while providing a mounting point for sensors and tools. Our tip mount incorporates and builds on our previous work on a device to retract the robot without undesired buckling of its body. Using our tip mount, we demonstrate two new soft growing robot capabilities: (1) pulling on the environment while retracting, and (2) retrieving and delivering objects. Finally, we discuss the limitations of our design and opportunities for improvement in future soft growing robot tip mounts. 
    more » « less