skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Bandgap opening in MoTe2 thin flakes induced by surface oxidation
Recently, the layered transition metal dichalcogenide 1T′-MoTe2 has generated considerable interest due to their superconducting and non-trivial topological properties. Here, we present a systematic study on 1T′-MoTe2 single-crystal and exfoliated thin-flakes by means of electrical transport, scanning tunnelling microscope (STM) measurements and band structure calculations. For a bulk sample, it exhibits large magneto-resistance (MR) and Shubnikov–de Hass oscillations in ρxx and a series of Hall plateaus in ρxy at low temperatures. Meanwhile, the MoTe2 thin films were intensively investigated with thickness dependence. For samples, without encapsulation, an apparent transition from the intrinsic metallic to insulating state is observed by reducing thickness. In such thin films, we also observed a suppression of the MR and weak anti-localization (WAL) effects. We attributed these effects to disorders originated from the extrinsic surface chemical reaction, which is consistent with the density functional theory (DFT) calculations and in-situ STM results. In contrast to samples without encapsulated protection, we discovered an interesting superconducting transition for those samples with hexagonal Boron Nitride (h-BN) film protection. Our results indicate that the metallic or superconducting behavior is its intrinsic state, and the insulating behavior is likely caused by surface oxidation in few layer 1T’-MoTe2 flakes.  more » « less
Award ID(s):
1808491
PAR ID:
10176561
Author(s) / Creator(s):
Date Published:
Journal Name:
Frontiers of Physics
Volume:
15
ISSN:
2095-0470
Page Range / eLocation ID:
33602
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. (, Science)
    Even the particle world is not immune to identity politics. Bosons have been in a bit of an identity crisis, or so it has seemed since 1989 ( 1 ). Quantum mechanics requires bosons made of two paired electrons to either condense into a superfluid with a well-defined phase with zero electrical resistance or localize in an insulating state with infinite resistance. The direct transition from superconducting to insulating states was widely observed in a range of thin films ( 2 – 4 ). The most popular model for explaining these observations ( 5 ) claims that the destruction of superconductivity occurs when the resistance of the thin film exceeds a critical value. For bosons on the brink of localization, electrically insulating behavior is observed if the resistance is greater than the quantum of resistance, R q = h /4 e 2 , otherwise superconductivity persists, where h is Planck's constant and e is the electric charge. On page 1505 of this issue, Yang et al. ( 6 ) offer a counterexample by establishing that a bosonic metallic phase disrupts the superconductor-insulator transition (SIT) in the high-temperature superconductor YBa 2 Cu 3 O 7– x (YBCO). 
    more » « less
  2. ; ; ; ; (, Applied Physics Letters)
    Among group VI transition metal dichalcogenides, MoTe 2 is predicted to have the smallest energy offset between semiconducting 2H and semimetallic 1T′ states. This makes it an attractive phase change material for both electronic and optoelectronic applications. Here, we report fast, nondestructive, and full phase change in Al 2 O 3 -encapsulated 2H-MoTe 2 thin films to 1T′-MoTe 2 using rapid thermal annealing at 900 °C. Phase change was confirmed using Raman spectroscopy after a short annealing duration of 10 s in both vacuum and nitrogen ambient. No thickness dependence of the transition temperatures was observed for flake thickness ranging from 1.5 to 8 nm. These results represent a major step forward in understanding the structural phase transition properties of MoTe 2 thin films using external heating and underline the importance of surface encapsulation for avoiding thin film degradation. 
    more » « less
  3. ; ; ; ; ; (, Journal of Physics: Condensed Matter)
    Abstract Experiments investigating magnetic-field-tuned superconductor–insulator transition (HSIT) mostly focus on two-dimensional material systems where the transition and its proximate ground-state phases, often exhibit features that are seemingly at odds with the expected behavior. Here we present a complementary study of a three-dimensional pressure-packed amorphous indium-oxide (InOx) powder where granularity controls the HSIT. Above a low threshold pressure of ∼0.2 GPa, vestiges of superconductivity are detected, although neither a true superconducting transition nor insulating behavior are observed. Instead, a saturation at very high resistivity at low pressure is followed by saturation at very low resistivity at higher pressure. We identify both as different manifestations of anomalous metallic phases dominated by superconducting fluctuations. By analogy with previous identification of the low resistance saturation as a ‘failed superconductor’, our data suggests that the very high resistance saturation is a manifestation of a ‘failed insulator’. Above a threshold pressure of ∼6 GPa, the sample becomes fully packed, and superconductivity is robust, withTCtunable with pressure. A quantum critical point atPC∼ 25 GPa marks the complete suppression of superconductivity. For a finite pressure belowPC, a magnetic field is shown to induce a HSIT from a true zero-resistance superconducting state to a weakly insulating behavior. Determining the critical field,HC, we show that similar to the 2D behavior, the insulating-like state maintains a superconducting character, which is quenched at higher field, above which the magnetoresistance decreases to its fermionic normal state value. 
    more » « less
  4. ; ; ; (, Journal of Physics D: Applied Physics)
    Abstract X-ray photoelectron spectroscopy (XPS) shows that dramatic changes in the core level binding energies can provide strong indications of transitions between more dielectric and more metallic CoFe2O4and NiCo2O4thin films. These significant variations in the XPS core level binding energies are possible with a combination of annealing and oxygen exposure; however, the behaviors of the CoFe2O4and NiCo2O4thin films are very different. The XPS Co and Fe 2p3/2core levels for the CoFe2O4thin film at room temperature show large photovoltaic surface charging, leading to binding energy shifts, characteristic of a highly dielectric (or insulating) surface at room temperature. The photovoltaic charging, observed in the XPS binding energies of the Co and Fe 2p3/2core levels, decreases with increasing temperature. The XPS core level binding energies of CoFe2O4thin film saturated at lower apparent binding energies above 455 K. This result shows that the prepared CoFe2O4thin film can be dielectric at room temperature but become more metallic at elevated temperatures. The dielectric nature of the CoFe2O4thin film was restored only when the film was annealed in sufficient oxygen, indicating that oxygen vacancies play an important role in the transition of the film from dielectric (or insulating) to metallic. In contrast, the XPS studies of initially metallic NiCo2O4thin film demonstrated that annealing NiCo2O4thin film led to a more dielectric or insulating film. The original more metallic character of the NiCo2O4film was restored when the NiCo2O4was annealed in sufficient oxygen. Effective activation energies are estimated for the carriers from a modified Arrhenius-type model applied to the core level binding energy changes of the CoFe2O4and NiCo2O4thin films, as a function of temperature. The origin of the carriers, however, is not uniquely identified. This work illustrates routes to regulate the surface metal-to-insulator transition of dielectric oxides, especially in the case of insulating NiCo2O4thin film that can undergo reversible metal-to-insulator transition with temperature. 
    more » « less
  5. ; ; ; ; (, APL Materials)
    Oxygen deficiency has been known to induce metallic conduction in bulk and thin film SrTiO3 (STO). Here, we report on the metallicity of STO substrates induced by the pulsed laser deposition (PLD) process of STO films under various oxygen-poor growth conditions. Depositions as short as 2 min result in conduction through the STO substrate. Films grown on other substrates are insulating, and STO substrates annealed under the same growth conditions without laser ablation remain insulating. By varying background gas composition during deposition, we find that the transport behavior transitions from metallic to insulating behavior at progressively higher ambient pressures for O2, 99% N2/1% O2, N2, and Ar. Metallic behavior persists to deposition pressures as high as 10−2 Torr in Ar. These results suggest that, during the PLD process, the deposition kinetics and plume energy are a dominant factor in the formation of oxygen vacancies which then diffuse into the substrate. Understanding these mechanisms is crucial to prevent STO substrate reduction during PLD of films which require low O2 partial pressures during growth. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email