skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Evaluation and Mitigation of AC Losses in a Fully Superconducting Machine for Wind Turbine Applications
A significant challenge in the design of fully superconducting (SC) machines is managing ac losses in the SC armature. Recent developments in MgB2 superconducting conductors promise low ac loss conductors suitable for fully SC machines. This paper presents an optimized design targeting low losses and low weight for a 10-MW fully SC generator suitable for offshore wind turbine applications. An outer rotor air-core machine topology is investigated to optimize the design with low weight and low losses. An active shielding concept is used to minimize the pole count without adding excessive weight. This enables a reduction in the electrical frequency for a practical design by a factor of 4 to 5 over current designs, driving ac losses and active components weight lower by an order of magnitude. In this study, armature current is varied to control electrical and magnetic loading in order to minimize losses. A pole count study is conducted to identify the design space suitable for MW scale machines. A comparison is made between active shield, passive shield and a hybrid topology to address the benefits of an active shield for weight reduction. Results suggest that low-pole-count designs with MgB2 conductors will enable machines with less than 1 kW of ac losses.  more » « less
Award ID(s):
1807823
PAR ID:
10176757
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
IEEE Transactions on Applied Superconductivity
Volume:
30
Issue:
4
ISSN:
1051-8223
Page Range / eLocation ID:
1-5
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, 2019 IEEE International Electric Machines Drives Conference (IEMDC))
    {Fully superconducting (SC)machines hold immense promise for high-power-density and higher efficiency machine solutions for offshore wind turbine applications. In this paper, a 10MW air-core fully SC machine is designed for offshore wind turbine applications. This machine design is considered with inside armature coils and outside rotating field coils. In this topology, shield iron can be eliminated or reduced by replacing it with shield coils which contain the magnetic flux inside the machine. This machine is attractive for off-shore wind turbine application due to its high-power density and high efficiency compared to a conventional shield iron design. However, due to the introduction of additional shield coils, this topology uses relatively more amount of SC material than a conventional shield iron design. Therefore, a tradeoff between the shield coils and the shield iron is explored in this paper. In addition, machine designs with different pole-counts are investigated to identify the optimal pole-count design for a low-speed application. A detailed ac loss calculation is evaluated for the machine and required cryocooler power is evaluated to obtain the machine efficiency. 
    more » « less
  2. ; ; ; ; ; (, Proceedings, 2020 IEEE Energy Conversion Congress and Exposition (ECCE), Detroit, MI)
    Coreless axial-flux permanent-magnet (AFPM) machines may be attractive options for high-speed and high-power density applications due to the elimination of core losses. In order to make full use of the advantages offered by these machines and avoid excessive eddy current losses in windings, advanced technologies for winding conductors need to be employed to suppress the eddy effect, such as the Litz wire and printed circuit board (PCB). In this paper, the best practices for designing Litz wire/PCB windings are discussed and a brief survey of state of the art PCB winding technology is provided. Three coreless AFPM machines are mainly considered. A design optimization procedure based on the multi-objective differential evolution algorithm and 3-dimensional (3D) finite element analysis (FEA) is proposed to take into account the ac winding losses of Litz wires and PCB traces in the machine design stage. Selected designs are being prototyped and will be tested with a customized test fixture. 
    more » « less
  3. ; (, IEEE)
    Low-power line-frequency transformers are common across several applications, but these transformers are found to have large standby losses, low efficiencies, large weights, and high costs. In this paper we optimize a power conversion stage for this and other applications where an unregulated, isolated converter is needed. The selected topology uses low-impedance passives to reduce their size; to address this case we analyze operation of a lower-Q resonant tank. Lastly, because of the application of low-power line-frequency transformers, we optimize around a typical usage cycle to minimize the yearly average power loss. For the application of a Class 2 line-frequency transformer, model results are accurate to simulation by within 12.1%, and optimization produced a design that was experimentally validated to achieve a yearly average power loss of 285.1 mW, a peak efficiency of 99.26% and a standby loss of 155 mW. 
    more » « less
  4. ; ; ; ; (, Microelectronics Journal)
    A low-power and compact 3-bit active phase shifter is designed and implemented in a 22 nm FDSOI CMOS process. A modified inverter-based topology, which takes advantage of miller capacitance, is used to create a compact and low-power solution, resulting in 10 and 90 x reduction in the power and chip area, respectively, for a given phase shift, compared to the standard inverter-based topology. At the same time, the proposed phase shifter exhibits less sensitivity to device mismatch. The proposed design measures 0.004 mm2, consumes 1.8 mW, and delivers up to 65°of phase shift with RMS phase and amplitude error of 3.85°and ±0.34 dB, respectively. The measured die-to-die variation is also confined to ±6.2°, which is 10% of the full range 
    more » « less
  5. ; (, 2018 IEEE Holm Conference on Electrical Contacts)
    Fast mechanical disconnect switches (FMS) are an integral part of hybrid circuit breakers, which are proposed as protection devices to clear faults in medium voltage distribution systems. The proposed FMS is a vacuum switch that is operated by an amplified piezoelectric actuator. Such actuators enable unprecedented speed and contact separation in less than one millisecond. The limitations that come with such designs are the low contact separation of typically less than one millimeter in open position and low contact force in the order of 100 N in closed position. This requires a new design of the contacts to operate under such constraints. The geometry of the contacts must be carefully designed to minimize electrical resistance when closed and minimize electric field enhancement when open. The paper presents finite element analysis and experimental results with the aim of identifying the most suitable contact geometry for FMS. The experiments show that optimized contact geometries have up to 40% less resistance than the initial spherical geometry. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email