An official website of the United States government
Abstract We developed the dynamic assembly of the hydrogen‐bonded multilayers of (poly(N‐vinylpyrrolidone/poly(methacrylic acid)) (PVPON/PMAA)) and compared their properties to the static multilayers. We found that dynamic multilayers, wherein a planar substrate is shaken during polymer adsorption, leads to a 15‐time faster deposition of the planar coatings. The thicknesses and roughness of the dynamic coatings were found to be ⁓30% larger than those of static (no shaking) multilayer films as measured by spectroscopic ellipsometry and atomic force microscopy. We examined the film growth, mechanical properties, wettability, hydration, and pH stability of the planar static and dynamic multilayers and demonstrated that these properties were insignificantly affected by the assembly mode. Both static and dynamic coatings produced microporous films when exposed to pH = 5.9, close to the film critical dissolution pH = 6. We discovered that during the release of the multilayer films into a solution to produce free‐standing films either as planar membranes or multilayer capsule shells, the molecular chain rearrangements result in the decreased roughness for both static and dynamic multilayers and lead to a decreased thickness of the dynamic multilayers. Our findings can help develop a rapid synthesis of thicker nanostructured polymer coatings for sensing and controlled delivery applications.
more »
« less
Influence of Side Chain Hydrolysis on the Evolution of Nanoscale Roughness and Porosity in Amine-Reactive Polymer Multilayers
We report the influence of side chain hydrolysis on the evolution of nanoscale structure in thin films fabricated by the reactive layer-by-layer (LbL) assembly of branched poly(ethylenimine) (PEI) and poly(2-vinyl-4,4-dimethylazlactone) (PVDMA). LbL assembly of PEI and PVDMA generally leads to the linear growth of thin, smooth films. However, assembly using PVDMA containing controlled degrees of side chain hydrolysis leads to the growth of thicker films that exhibit substantial nanoscale roughness, porosity, and have resulting physicochemical behaviors (e.g., superhydrophobicity) that are similar to those of some thicker PEI/PVDMA coatings reported in past studies. Our results reveal that the degree of PVDMA partial hydrolysis (or carboxylic acid group content) influences the extent to which complex film features develop, suggesting that ion-pairing interactions between hydrolyzed side chains and amines in PEI promote the evolution of bulk and surface morphology. Additional experiments demonstrate that these features likely arise from polymer/polymer interactions at the surfaces of the films during assembly, and not from the formation and deposition of solution-phase polymer aggregates. When combined, our results suggest that nanoporous structures and rough features observed in past studies likely arise, at least in part, from some degree of adventitious side chain hydrolysis in the PVDMA used for film fabrication. Our results provide useful insight into molecular-level features that govern the growth and structures of these reactive materials, and provide a framework to promote nanoscale morphology reliably and reproducibly. The principles and tools reported here should prove useful for further tuning the porosities and tailoring the physicochemical behaviors of these reactive coatings in ways that are important in applied contexts.
more »
« less
- Award ID(s):
- 1720415
- PAR ID:
- 10180244
- Date Published:
- Journal Name:
- Chemistry of materials
- ISSN:
- 0897-4756
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Traditional dip-assisted layer-by-layer (LbL) assembly produces robust and conformal coatings, but it is time-consuming. Alternatively, spray-assisted layer-by-layer (SA-LbL) assembly has gained interest due to rapid processing resulting from the short adsorption time. However, it is challenging to assemble anisotropic nanomaterials using this spray-based approach. This is because the standard approach for fabricating “ all-polyelectrolyte ” LbL films does not necessarily give rise to satisfactory film growth when one of the adsorbing components is anisotropic. Here, polymers are combined with a model anisotropic nanomaterial via SA-LbL assembly. Specifically, graphene oxide (GO) is investigated, and the effect of anchor layer, colloidal stability, charge distribution along the carbon framework, and concentration of polymer on the growth and the film quality is examined to gain insight into how to achieve pinhole-free, smooth polymer/GO SA-LbL coatings. This approach might be applicable to other anisotropic nanomaterials such as clays or 2D nanomaterials for future development of uniform coatings by spraying.more » « less
-
Functional thin coatings are crucial in modern and emerging technologies, providing specified surface properties and protection, thereby influencing the performance and lifetime of materials and devices. The electrodeposition of polymer networks (EPoN) has recently been reported as a facile and potentially broadly applicable method to fabricate conformal polymeric ultrathin films on conductive substrates with arbitrary shapes and surface topography under mild solution conditions. In this work, a new generation of EPoN is introduced that utilizes a chemically reactive polymer appended by a small fraction of a electrochemical crosslinker as side groups. This EPoN iteration eliminates the need for precise end-group functionalization, enables the tuning of crosslink density and film thickness independent of polymer size, and the resulting reactive ultrathin films are amenable to post-deposition modification with desired functionalities using facile click-chemistry. To demonstrate this concept, we electrodeposit polyisoprene with small side-group fractions of the oxidative crosslinker phenol (<5%) as a thiol–ene-reactive polymer-network coating. The EPoN-derived ultrathin films are tunable and uniform with a thickness in the 100s of nanometers depending on phenol fraction and electrodeposition potential, and show a conformal morphology on complex porous electrode architectures. We further demonstrate post-EPoN functionalization of the ultrathin polyisoprene coatings with thiol–ene chemistry.more » « less
-
Direct layer-by-layer (LbL) assembly of cationic, small-molecule antibacterial bioactives with water-soluble, ionic polyphosphazenes (PPzs) containing trifluoroethoxy and carboxy substitients is reported. First, influence of PPzs hydrophobicity and antibiotic charge density on LbL assembly was studied via evolution of dry film thickness. We found that the use of fluorinated PPz polyelectrolytes enhanced ionic pairing within LbL coatings, and that increasing charge density of small molecules increased antibiotic uptake. This strategy was successful even in the case of gentamicin, a hydrophilic, small antibiotic with only 3 to 4 positive charges at pH 7.5. Confirmation of antibiotic presence in films was demonstrated via x-ray photoelectron spectroscopy. Importantly, LbL films of fluorinated PPz polyelectrolytes retained antibiotics in physiological conditions due to the enhanced hydrophobic interactions. In contrast, LbL films of non-fluorinated PPzs released antibiotics at low pH and in the presence of salt following the charge renormalization argument. The potential of these coatings with a biomedically relevant bacterial strain, Staphylococcus aureus, is discussed.more » « less
-
Stimuli-responsive polymers functionalized with reactive inorganic groups enable creation of macromolecular structures such as hydrogels, micelles, and coatings that demonstrate smart behavior. Prior studies using poly( N -isopropyl acrylamide- co -3-(trimethoxysilyl)propyl methacrylate) (P(NIPAM- co -TMA)) have stabilized micelles and produced functional nanoscale coatings; however, such systems show limited responsiveness over multiple thermal cycles. Here, polymer architecture and TMA content are connected to the aqueous self-assembly, optical response, and thermoreversibility of two distinct types of PNIPAM/TMA copolymers: random P(NIPAM- co -TMA), and a ‘blocky-functionalized’ copolymer where TMA is localized to one portion of the chain, P(NIPAM- b -NIPAM- co -TMA). Aqueous solution behavior characterized via cloud point testing (CPT), dynamic light scattering (DLS), and variable-temperature nuclear magnetic resonance spectroscopy (NMR) demonstrates that thermoresponsiveness and thermoreversibility over multiple cycles is a strong function of polymer configuration and TMA content. Despite low TMA content (≤2 mol%), blocky-functionalized copolymers assemble into small, well-ordered structures above the cloud point that lead to distinct transmittance behaviors and stimuli-responsiveness over multiple cycles. Conversely, random copolymers form disordered aggregates at elevated temperatures, and only exhibit thermoreversibility at negligible TMA fractions (0.5 mol%); higher TMA content leads to irreversible structure formation. This understanding of the architectural and assembly effects on the thermal cyclability of aqueous PNIPAM- co -TMA can be used to improve the scalability of responsive polymer applications requiring thermoreversible behavior, including sensing, separations, and functional coatings.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/acs.chemmater.0c02095
