An official website of the United States government
Abstract There has been significant interest in developing new catalytic systems to convert linear chain alkanes into olefins and aromatics. In the case of higher alkanes (≥C6), the production of aromatic compounds such as benzene‐toluene‐xylenes is highly desirable. However, as the length of the carbon chain increases, the dehydrogenation process becomes more complex, not only due to the challenges of C−H activation but also the need for selectivity towards the desired products by the possibility of side reactions such as isomerization and cracking. Here, we present a detailed analysis of the dehydroaromatization of n‐hexane, n‐heptane, and n‐octane, using PtSn intermetallic nanoparticles supported on SBA‐15 as the catalyst. Throughin situspectroscopic and kinetic analysis, we have probed the reaction kinetics and catalyst deactivation, and provided a mechanistic understanding of the dehydroaromatization process on the surface of the PtSn intermetallic nanoparticles. Introducing Sn has been shown to be crucial not only for enhancement of catalytic activity, but also for higher aromatics selectivity and stability on stream. Furthermore, the analysis of dehydroaromatization reaction rates of reactant and possible intermediates indicates that the dehydroaromatization of n‐hexane to benzene likely proceeds through initial dehydrogenation steps followed by ring closing.
more »
« less
Pairwise semi-hydrogenation of alkyne to cis -alkene on platinum-tin intermetallic compounds
The molecular basis for the high cis -alkene selectivity over intermetallic PtSn for alkyne semi-hydrogenation is demonstrated. Unlike the universal assumption that the bimetallic surface is saturated with atomic hydrogen, molecular hydrogen has a higher barrier for dissociative adsorption on intermetallic PtSn due to the deficiency of Pt three-fold sites. The resulting molecular behavior of adsorbed hydrogen on intermetallic PtSn nanoparticles leads to pairwise-hydrogenation of three alkynes to the corresponding cis -alkenes, satisfying both high stereoselectivity and high chemoselectivity.
more »
« less
- Award ID(s):
- 1808239
- PAR ID:
- 10180762
- Date Published:
- Journal Name:
- Nanoscale
- Volume:
- 12
- Issue:
- 15
- ISSN:
- 2040-3364
- Page Range / eLocation ID:
- 8519 to 8524
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The reaction of the D1-silylidyne radical (SiD; X 2 Π) with phosphine (PH 3 ; X 1 A 1 ) was conducted in a crossed molecular beams machine under single collision conditions. Merging of the experimental results with ab initio electronic structure and statistical Rice–Ramsperger–Kassel–Marcus (RRKM) calculations indicates that the reaction is initiated by the barrierless formation of a van der Waals complex (i0) as well as intermediate (i1) formed via the barrierless addition of the SiD radical with its silicon atom to the non-bonding electron pair of phosphorus of the phosphine. Hydrogen shifts from the phosphorous atom to the adjacent silicon atom yield intermediates i2a, i2b, i3; unimolecular decomposition of these intermediates leads eventually to the formation of trans / cis -phosphinidenesilyl (HSiPH, p2/p4) and phosphinosilylidyne (SiPH 2 , p3) via hydrogen deuteride (HD) loss (experiment: 80 ± 11%, RRKM: 68.7%) and d - trans / cis -phosphinidenesilyl (DSiPH, p2′/p4′) plus molecular hydrogen (H 2 ) (experiment: 20 ± 7%, RRKM: 31.3%) through indirect scattering dynamics via tight exit transition states. Overall, the study reveals branching ratios of p2/p4/p2′/p4′ ( trans / cis HSiPH/DSiPH) to p3 (SiPH 2 ) of close to 4 : 1. The present study sheds light on the complex reaction dynamics of the silicon and phosphorous systems involving multiple atomic hydrogen migrations and tight exit transition states, thus opening up a versatile path to access the previously elusive phosphinidenesilyl and phosphinosilylidyne doublet radicals, which represent potential targets of future astronomical searches toward cold molecular clouds (TMC-1), star forming regions (Sgr(B2)), and circumstellar envelopes of carbon rich stars (IRC + 10216).more » « less
-
The microwave spectra of three isotopologues of the gas-phase heterodimer formed between cis-1,2-difluoroethylene and hydrogen chloride are obtained in the 5–21 GHz region using Fourier transform microwave spectroscopy. The molecular structure, determined from the analysis of the spectra and supported by quantum chemistry calculations, has the hydrogen atom of the hydrogen chloride molecule interacting with both fluorine atoms of the fluoroethylene and no interaction between the chlorine atom and the olefin. Although the equilibrium structure has two inequivalent H⋯F interactions, zero-point motion averages over the two equivalent choices for these interactions, rendering the pairs of like atoms (C, H, and F) of the fluoroethylene equivalent, retaining the C2v symmetry of the olefin. This results in only one unique singly substituted 13C isotopologue and in the observed effects on transition intensities due to nuclear spin statistics. The heterodimer structure allows for a strong, linear hydrogen bond between the HCl donor and the fluoroethylene acceptor that is more important here than in the analogous acetylene containing complex, where the interaction between the π electrons of acetylene and an electrophilic hydrogen atom on the olefin compensates for the loss of linearity required for binding to a geminal F/H pair.more » « less
-
As the development of polymer electrolyte membrane fuel cells (PEMFCs) has sped up in recent years, producing active and durable electrocatalysts has become an increasingly important technical challenge. Platinum–cobalt (Pt–Co) alloy electrocatalyst has been commercially applied to hydrogen-powered fuel cell vehicles, and their intermetallic forms promise better durability, which is crucial to satisfy the 8000 h lifetime target of heavy-duty vehicles and other transportation options. In this feature article, we first present the atomically ordered structures of Pt–Co intermetallic, then discuss the thermodynamic and kinetic driving forces for making the PtCo-based intermetallic nanoparticles with desired structural attributes, followed by recent examples to illustrate how to achieve better control in composition, size, and shape. Discussion on the relationship between the key structural features and catalytic performance is focused on the application of Pt–Co intermetallic nanostructures as oxygen reduction reaction (ORR) electrocatalysts for hydrogen-powered PEMFCs. We emphasize specifically the importance of intermetallic structures for enhancing the durability and summarize the characterizations of their electrocatalytic performance in both three-electrode system and full cell studies. Finally, we provide our perspectives on the design, synthesis, characterization, and property studies of Pt–Co intermetallic nanoparticles as ORR electrocatalysts. This article should provide a new understanding on the design of ORR electrocatalytic applications using this class of intermetallics.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D0NR00920B
