Recent advances in machine learning (ML) have enabled predictive programs for photovoltaic characterization, optimization, and materials discovery. Despite these advances, the standard photovoltaic materials development workflow still involves manually performing multiple characterization techniques on every new device, requiring significant time and expenditures. One barrier to ML implementation is that most models reported to date are trained on computer simulated data, due to the difficulty in experimentally collecting the massive data sets needed for model training, limiting the ability to assess the limitations and validity of these methods, as well as to access new potential physical mechanisms absent in simulations. Herein, several neural networks trained on experimental data from PbS colloidal quantum dot thin‐film solar cells are introduced. These models predict multiple, complex materials properties, including carrier mobility, relative photoluminescence intensity, and electronic trap‐state density, from a single, simple measurement: illuminated current–voltage curves. The measurement system considers the spatial distribution of the materials parameters to gather and predict large amounts of data by treating an inhomogeneous device as a series of thousands of micro‐devices, a novel feature compared to existing solutions. This model can be extended to other materials and devices, accelerating development times for new optoelectronic technologies.
- Award ID(s):
- 1735282
- PAR ID:
- 10184483
- Date Published:
- Journal Name:
- Photoluminescence Excitation Spectroscopy Characterization of Surface and Bulk Quality for Early-Stage Potential of Material Systems
- Page Range / eLocation ID:
- 0377 to 0381
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
more » « less
Abstract Mobilities and lifetimes of photogenerated charge carriers are core properties of photovoltaic materials and can both be characterized by contactless terahertz or microwave measurements. Here, the expertise from fifteen laboratories is combined to quantitatively model the current‐voltage characteristics of a solar cell from such measurements. To this end, the impact of measurement conditions, alternate interpretations, and experimental inter‐laboratory variations are discussed using a (Cs,FA,MA)Pb(I,Br)3halide perovskite thin‐film as a case study. At 1 sun equivalent excitation, neither transport nor recombination is significantly affected by exciton formation or trapping. Terahertz, microwave, and photoluminescence transients for the neat material yield consistent effective lifetimes implying a resistance‐free JV‐curve with a potential power conversion efficiency of 24.6 %. For grainsizes above ≈20 nm, intra‐grain charge transport is characterized by terahertz sum mobilities of ≈32 cm2V−1s−1. Drift‐diffusion simulations indicate that these intra‐grain mobilities can slightly reduce the fill factor of perovskite solar cells to 0.82, in accordance with the best‐realized devices in the literature. Beyond perovskites, this work can guide a highly predictive characterization of any emerging semiconductor for photovoltaic or photoelectrochemical energy conversion. A best practice for the interpretation of terahertz and microwave measurements on photovoltaic materials is presented.
-
more » « less
The optical properties are investigated by spectroscopic characterizations for bilayer InGaAs/GaAs quantum dot (QD) structures consisting of a layer of surface quantum dots (SQDs) separated from a layer of buried quantum dots (BQDs) by different GaAs spacers with thicknesses of 7 nm, 10.5 nm and 70 nm. The coupling from the BQDs to SQDs leads to carrier transfer for the two samples with thin spacers, 7 nm and 10.5 nm, in which QD pairs are obtained while not for the 70 nm spacer sample. The carrier tunneling time is measured to be 0.145 ns and 0.275 ns from BQDs to SQD through the 7 nm and 10.5 nm spacers, respectively. A weak emission band can be observed at the wavelength of ∼ 960 nm, while the excitation intensity dependent PL and PLE spectra show that this is from the wetting layer (WL) of the SQDs. This WL is very important for carrier dynamics in bilayer structures of BQDs and SQDs, including for carrier generation, capture, relaxation, tunneling, and recombination. These results provide useful information for understanding the optical properties of InGaAs SQDs and for using such hybrid structures as building blocks for surface sensing devices.
-
Numerous characterization techniques have been developed over the last century, which have advanced progress on the development of a variety of photovoltaic technologies. However, this multitude of techniques leads to increasing experimental costs and complexity. It would be useful to have an approach that does not require the time commitment or operation costs to directly learn and implement every new measurement technique. Herein, we explore several machine learning (ML) models that output complex materials parameters, such as electronic trap state density, solely using illuminated current-voltage curves. This greatly reduces both the complexity and cost of the characterization process. Current-voltage curves were chosen as the only input to our models because this type of measurement is relatively simple to perform and most photovoltaic research labs already collect this information on all devices. We compare several different ML network architectures, all of which are trained on experimental data from PbS colloidal quantum dot thin film solar cells. We predict values for underlying materials parameters and compare them to experimentally measured results.more » « less
-
Solid-state quantum emitters have emerged as a leading quantum memory for quantum networking applications. However, standard optical characterization techniques are neither efficient nor repeatable at scale. Here we introduce and demonstrate spectroscopic techniques that enable large-scale, automated characterization of colour centres. We first demonstrate the ability to track colour centres by registering them to a fabricated machine-readable global coordinate system, enabling a systematic comparison of the same colour centre sites over many experiments. We then implement resonant photoluminescence excitation in a widefield cryogenic microscope to parallelize resonant spectroscopy, achieving two orders of magnitude speed-up over confocal microscopy. Finally, we demonstrate automated chip-scale characterization of colour centres and devices at room temperature, imaging thousands of microscope fields of view. These tools will enable the accelerated identification of useful quantum emitters at chip scale, enabling advances in scaling up colour centre platforms for quantum information applications, materials science and device design and characterization.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1109/PVSC40753.2019.8980637
