skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Electric Drives with Wide Bandgap Devices for Two-Phase Very Low Inductance Machines
Slotless and coreless machines with low inductance and low core losses are attractive for high speed and high power density applications. With the increase in fundamental frequency, typical drive implementations using conventional silicon-based devices are performance limited and also produce large current and torque ripples. This paper presents a systematic study of proposed drive configurations implemented with wide bandgap (WBG) devices in order to mitigate such issues for 2-phase very low inductance machines. Two inverter topologies, i.e., a dual H-bridge inverter with maximum redundancy and survivability and a 3-leg inverter for reduced cost, are considered. Feasible modulation schemes are derived based on theoretical analysis and the associated maximum output voltages are identified. Simulation and experimental results are provided to validate the feasibility of drive systems and the effectiveness of analysis.  more » « less
Award ID(s):
1809876
PAR ID:
10187400
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Proceedings, 2020 IEEE Energy Conversion Congress and Exposition (ECCE), Detroit, MI
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. (, Proceedings of the 52nd Frontiers of Power Conference)
    null (Ed.)
    Increased capacity associated with renewable energy sources has created a need for improved methods for controlling power flows from inverter-based generation. This research provides a comparative study of finite-control-set model predictive current control (FCS-MPC-based) with respect to conventional proportional-integral-based (PI-based) synchronous current control for a three-phase voltage source inverter (VSI). The inverter is accompanied by an inductive-capacitive-inductive (LCL) filter to attenuate pulse width modulation (PWM) switching harmonics. However, an LCL filter introduces a resonance near to the control stability boundary, giving rise to substantial complexity from a control perspective. In order to avoid potential instability caused by the resonance, active damping can be included in the PI-based current control. Though properly designed active damping can improve inverter stability, in practice the robustness of standard PI control is not attainable due to variability in the grid inductance at the point of common coupling (PCC). This is due to impedance variations causing large shifts in the LCL resonance frequency. Weak grid conditions (i.e., a low short-circuit ratio) and a correspondingly high line impedance are particularly susceptible to LCL induced resonance instabilities. As an approach to operate with grid impedance variations and weak grid conditions, FCS-MPC has the potential to produce superior performance compared to PI-based current control methods. This comparative study indicates that FCS-MPC has improved resonance damping and fast dynamic capability in a system with renewable energy sources under weak grid conditions. Detailed results from MATLAB/SimPower are presented to validate the suggested FCS-MPC method where it is robust to uncertainty in the grid impedance variations. Overall results indicate an improvement over conventional PI-based current control methods. 
    more » « less
  2. ; ; (, 2018 9th IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG))
    Distributed generation is gaining greater penetration levels in distribution grids due to government incentives for integrating distributed energy resources (DERs) and DER cost reductions. The frequency response of a grid-connected single inverter changes as other inverters are connected in parallel due to the couplings among grid inductance and/or inverter output filters. The selection of the inverter- or grid-side currents as feedback control signals is then not trivial because each one has tradeoffs. This paper analyses the system stability for multiple parallel- and grid-connected inverters using the inverter- or gridside currents as feedback signals. Modeling of both feedback signals is performed using the current separation technique. Moreover, the stability range for different conditions including active damping is analyzed through the root locus technique. The grid-side current has a wider range of stability, but the inverterside current allows for higher values of the proportional gain near the critical frequency and no extra sensors are needed since measurement of the inverter current is needed for protection in high-power applications. 
    more » « less
  3. ; (, IET Renewable Power Generation)
    Abstract Power electronics–based converters for photovoltaic (PV) systems are susceptible to overcurrents; it is important to design their controllers to reduce the transient current for all viable operating conditions. To design a current controller and find the maximum transient current via simulation‐based techniques, the exact values of the system parameters, initial states, and inputs are required. However, they are not precisely known in practice, some system parameters such as inductances may change over time, and output power and load are variable. The uncertainty in the parameter (filter inductance) and input of the system (injected power) should be considered in the analysis of a PV system controllers as it can degrade their performance, which are designed for the system nominal parameters. This paper employs reachability analysis for a grid‐connected PV system to (1) find the maximum transient current, (2) devise an improved PI current controller and (3) compare the maximum transient current in PI‐ and internal model control (IMC)‐based controllers with uncertain‐but‐bounded input power and inductance error. Simulation and experimental studies showcase the results. 
    more » « less
  4. ; ; (, IEEE)
    Emerging power electronic drives and converters, especially wide bandgap (WBG) technology-based devices, are expected to operate at high voltages and switching frequencies, potentially reaching up to several hundred kHz. These operating conditions pose significant challenges to the reliability of insulation systems in motor windings, which are critical to the longevity and safe operation of electrical machines. This study investigates the impact of high-frequency square wave voltage pulses on the lifetime of motor winding insulation by conducting lifetime tests on twisted pair magnet wire commonly used in electrical machines. The experiments were conducted in the frequency range of 100 kHz to 300 kHz, with rise times of 50 ns and 400 ns (slew rate ranging from 2.4kV/μ s to 19.2kV/μs), to simulate the conditions typical in modern power electronics and inverter-driven systems. The results show that fast rise times and high switching frequencies influence turn-to-turn insulation's aging and breakdown characteristics. The findings highlight the importance of switching frequency and rise time in determining the reliability of insulation systems, offering critical data to enhance the design and performance of electrical machines in the context of high-frequency operation. 
    more » « less
  5. ; ; ; ; ; ; ; (, Applied Physics Letters)
    Emergent inductance has attracted significant interest for its relevance in both interesting fundamental physics and practical applications in magnetic devices that demand miniaturization without compromising inductance. In this Letter, we report the discovery of a stepwise magnetic field-induced emergent magneto-inductance (EML) effect in Permalloy (Py) thin films deposited on polycarbonate (PC) substrates. Remarkably, Py/PC devices exhibit an exceptionally large inductance variation exceeding 1 μH at room temperature, and intriguingly, a sign reversal of inductance occurs around the zero magnetic field. The dependencies of the EML effect on frequency, step magnetic field changes, and film width can be explained from the theory based on the spin motive force driven by transient domain wall motion. This study opens up exciting avenues for advancing our understanding of emergent inductance in fundamental physics and paves the way for practical applications in flexible magnetic devices. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email