skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: A Comparative Study of Redox Mediators for Improved Performance of Li–Oxygen Batteries
Redox meditators (RMs) are soluble catalysts located in an electrolyte that can improve the energy efficiency (reduced overpotential) and cyclability of Li–oxygen (Li–O2) batteries. In this work, 20 RMs within a Li–O2 system with dimethyl sulfoxide and tetraethylene glycol dimethyl ether electrolytes are studied and their electrochemical features such as redox potential, the separation of cathodic and anodic peaks, and their current intensities are measured using cyclic voltammetry (CV) experiments. Six RMs are selected as “primary” choices based on their electrochemical performance, and stability tests are then performed to examine their electrochemical responses after consecutive cycles. Moreover, galvanostatic cycling tests are performed within a Li–O2 battery system assembled with selected six RMs for real case consistency investigations. It is found that results from CV to galvanostatic cycling tests are consistent for halides and organometallic RMs, where the former exhibit much higher stability. However, the organic RMs show high reversibility in CV but low in battery cycling results. Density functional theory calculations are carried out to gain more understanding of the stability and redox potentials of the RMs. This study provides comparative information to select the most reliable RMs for Li–O2 batteries along with new fundamental understanding of their electrochemical activity and stability.  more » « less
Award ID(s):
1729420
PAR ID:
10195331
Author(s) / Creator(s):
; ; ; ; ;
Date Published:
Journal Name:
Advanced energy materials
ISSN:
1614-6840
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. (, ACS applied materials interfaces)
    null (Ed.)
    Redox mediators (RMs) are solution-based additives that have been extensively used to reduce the charge potential and increase the energy efficiency of Li–oxygen (Li–O2) batteries. However, in the presence of RMs, achieving a long cycle-life operation of Li–O2 batteries at a high current rate is still a major challenge. In this study, we discover a novel synergy among InX3 (X = I and Br) bifunctional RMs, molybdenum disulfide (MoS2) nanoflakes as the air electrode, dimethyl sulfoxide/ionic liquid hybrid electrolyte, and LiTFSI as a salt to achieve long cycle-life operations of Li–O2 batteries in a dry air environment at high charge–discharge rates. Our results indicate that batteries with InI3 operate up to 450 cycles with a current density of 0.5 A g–1 and 217 cycles with a current density of 1 A g–1 at a fixed capacity of 1 A h g–1. Batteries with InBr3 operate up to 600 cycles with a current density of 1 A g–1. These batteries can also operate at a higher charge rate of 2 A g–1 up to 200 cycles (for InBr3) and 160 cycles (for InI3). Our experimental and computational results reveal that while X3– is the source of the redox mediator, LiX at the MoS2 cathode, In3+ reacts on the lithium anode side to form a protective layer on the surface, thus acting as an effective bifunctional RM in a dry air environment. This evidence for a simultaneous improvement in the current rates and cycle life of a battery in a dry air atmosphere opens a new direction for research for advanced energy storage systems. 
    more » « less
  2. (, Small)
    null (Ed.)
    Lithium–oxygen (Li–O2) batteries possess the highest theoretical energy density (3500 Wh kg−1), which makes them attractive candidates for modern electronics and transportation applications. In this work, an inexpensive, flexible, and wearable Li–O2 battery based on the bifunctional redox mediator of InBr3, MoS2 cathode catalyst, and Fomblin-based oxygen permeable membrane that enable long-cycle-life operation of the battery in pure oxygen, dry air, and ambient air is designed, fabricated, and tested. The battery operates in ambient air with an open system air-breathing architecture and exhibits excellent cycling up to 240 at the high current density of 1 A g−1 with a relative humidity of 75%. The electrochemical performance of the battery including deep-discharge capacity, and rate capability remains almost identical after 1000 cycle in a bending fatigue test. This finding opens a new direction for utilizing high performance Li–O2 batteries for applications in the field of flexible and wearable electronics. 
    more » « less
  3. (, Advanced functional materials)
    LiCoO2 is a prime example of widely used cathodes that suffer from the structural/thermal instability issues that lead to the release of their lattice oxygen under nonequilibrium conditions and safety concerns in Li‐ion batteries. Here, it is shown that an atomically thin layer of reduced graphene oxide can suppress oxygen release from LixCoO2 particles and improve their structural stability. Electrochemical cycling, differential electrochemical mass spectroscopy, differential scanning calorimetry, and in situ heating transmission electron microscopy are performed to characterize the effectiveness of the graphene‐coating on the abusive tolerance of LixCoO2. Electrochemical cycling mass spectroscopy results suggest that oxygen release is hindered at high cutoff voltage cycling when the cathode is coated with reduced graphene oxide. Thermal analysis, in situ heating transmission electron microscopy, and electron energy loss spectroscopy results show that the reduction of Co species from the graphene‐coated samples is delayed when compared with bare cathodes. Finally, density functional theory and ab initio molecular dynamics calculations show that the rGO layers could suppress O2 formation more effectively due to the strong Co cathode bond formation at the interface of rGO/LCO where low coordination oxygens exist. This investigation uncovers a reliable approach for hindering the oxygen release reaction and improving the thermal stability of battery cathodes. 
    more » « less
  4. ; ; ; ; (, Micromachines)
    Ni-rich Li(NixCoyMnz)O2 (x ≥ 0.8)-layered oxide materials are highly promising as cathode materials for high-energy-density lithium-ion batteries in electric and hybrid vehicles. However, their tendency to undergo side reactions with electrolytes and their structural instability during cyclic lithiation/delithiation impairs their electrochemical cycling performance, posing challenges for large-scale applications. This paper explores the application of an Al2O3 coating using an atomic layer deposition (ALD) system on Ni-enriched Li(Ni0.8Co0.1Mn0.1)O2 (NCM811) cathode material. Characterization techniques, including X-ray diffraction, scanning electron microscopy, and transmission electron microscopy, were used to assess the impact of alumina coating on the morphology and crystal structure of NCM811. The results confirmed that an ultrathin Al2O3 coating was achieved without altering the microstructure and lattice structure of NCM811. The alumina-coated NCM811 exhibited improved cycling stability and capacity retention in the voltage range of 2.8–4.5 V at a 1 C rate. Specifically, the capacity retention of the modified NCM811 was 5%, 9.11%, and 11.28% higher than the pristine material at operating voltages of 4.3, 4.4, and 4.5 V, respectively. This enhanced performance is attributed to reduced electrode–electrolyte interaction, leading to fewer side reactions and improved structural stability. Thus, NCM811@Al2O3 with this coating process emerges as a highly attractive candidate for high-capacity lithium-ion battery cathode materials. 
    more » « less
  5. ; ; ; ; ; ; (, ChemXriv)
    Redox flow batteries (RFBs) have emerged as significant energy storage systems amid the growing adoption of renewable energy. However, the advancement of all-organic RFBs is hindered by material crossover, limited energy density, and the time-consuming selection of suitable electrolyte partners. To address these challenges, bipolar redox-active organic molecules (BRMs) show promise for charge storage in symmetric organic redox flow batteries (SORFBs), although their development can be complex and tedious. In this study, we report an approach aimed at streamlining the identification of suitable compounds through an examination of the organophotocatalyst literature, illustrated through six acridinium compounds exhibiting stable redox states. These compounds were thoroughly characterized in electrochemical cells and subjected to cycling tests in fully symmetric flow batteries. Notably, a trisubstituted electron-rich acridinium compound emerged as a potential candidate, demonstrating over 20 days of cycling stability. Given the extensive library of organic catalysts and the advantages of SORFB designs, this approach will prove to be essential for developing an innovative electrochemical storage system. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email