- Award ID(s):
- 1808484
- NSF-PAR ID:
- 10197854
- Date Published:
- Journal Name:
- Polymer Chemistry
- Volume:
- 11
- Issue:
- 33
- ISSN:
- 1759-9954
- Page Range / eLocation ID:
- 5365 to 5376
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
null (Ed.)Due to a mismatch in mechanical moduli, the interface between constituent materials in a composite is the primary locus for crack nucleation due to stress concentration. Relaxation of interfacial stresses, without modifying the properties of constituent materials, is a potent means of improving composite performance with broad appeal. Herein, we develop a new type of adaptive interface that utilizes thiol–thioester exchange (TTE) at the filler–polymer interface. Specifically, dynamic covalent bonds sequestered at material interfaces are reversibly exchanged in the presence of thioester moieties, excess thiol and a base/nucleophile catalyst. Employing this active interface effectively mitigates deleterious growth of interfacial stresses, thereby enhancing the composite's mechanical performance in terms of reductions in polymerization shrinkage stress and improvement in toughness. Activating interfacial TTE in an otherwise static matrix resulted in 45% reduction in the polymerization stress, more significant post-polymerization stress relaxation and drastically increased toughness relative to control composites incapable of TTE bond exchange but otherwise identical. In particular, the higher fracture toughness in TTE-activated composites is attributed to the alleviation of crack tip strain concentration, as revealed by digital image correlation.more » « less
-
Abstract Herein, we report on the incorporation of a dithioester modification to a self‐assembling peptide and characterize a thiol‐thioester exchange on the nanofiber's surface with respect to amount of soluble exogenous thiol present and pH of the reaction. The ratios of all peptide species throughout the exchange reaction were reproducibly monitored by matrix‐assisted laser desorption ionization time‐of‐flight (MALDI‐TOF) mass spectrometry, highlighting the utility of MALDI to characterize heterogeneous and dynamic supramolecular systems. The tuneable revealing of thiols through a dynamic covalent chemical reaction presents a new strategy for labeling supramolecular surfaces. This strategy of combining reversible peptide self‐assembly and dynamic covalent chemistry opens another route for the post‐assembly modification of amyloid‐based supramolecular structures and the design of functional biomaterials.
-
Covalent adaptable networks (CANs) containing reversible cross-links impart recyclability to thermoset materials without sacrificing their desirable properties ( e.g. high tensile strength and solvent resistance). In addition to thermal recycling, the sustainability of these materials may be further improved by incorporating bio-sourced monomers or by enabling alternate end-of-life fates, such as biodegradation or recovery of starting materials. The alternating ring-opening copolymerisation of epoxides and cyclic anhydrides permits the modular synthesis of polyester pre-polymers that can then be cross-linked to form dynamic imine-linked networks. We report the synthesis and characterisation of five imine exchange polyester CANs with varied cross-linking densities and pre-polymer architectures. While the materials exhibit characteristic thermoset properties at service temperatures, differences in pre-polymer architecture produce distinct dynamic mechanical effects at elevated temperatures. The networks may be thermally reprocessed with full recovery of their tensile strengths and cross-linking densities, dissociated to pre-polymer, or hydrolytically degraded.more » « less
-
Abstract Covalent adaptable networks (CANs) based on the thiol–Michael (TM) linkages can be thermal and pH responsive. Here, a new vinyl‐sulfone‐based thiol–Michael crosslinker is synthesized and incorporated into acrylate‐based CANs to achieve stable materials with dynamic properties. Because of the reversible TM linkages, excellent temperature‐responsive re‐healing and malleability properties are achieved. In addition, for the first time, a photoresponsive coumarin moiety is incorporated with TM‐based CANs to introduce light‐mediated reconfigureability and postpolymerization crosslinking. Overall, these materials can be on demand dynamic in response to heat and light but can retain mechanical stability at ambient condition.
-
Covalent adaptable networks (CANs) represent a novel class of polymeric materials crosslinked by dynamic covalent bonds. Since their first discovery, CANs have attracted great attention due to their high mechanical strength and stability like conventional thermosets under service conditions and easy reprocessability like thermoplastics under certain external stimuli. Here, we report the first example of ionic covalent adaptable networks (ICANs), a type of crosslinked ionomers, consisting of negatively charged backbone structures. More specifically, two ICANs with different backbone compositions were prepared through spiroborate chemistry. Given the dynamic nature of the spiroborate linkages, the resulting ionomer thermosets display rapid reprocessability and closed-loop recyclability under mild conditions. The materials mechanically broken into smaller pieces can be reprocessed into coherent solids at 120 °C within only 1 min with nearly 100% recovery of the mechanical properties. Upon treating the ICANs with dilute hydrochloric acid at room temperature, the valuable monomers can be easily chemically recycled in almost quantitative yield. This work demonstrates the great potential of spiroborate bonds as a novel dynamic ionic linkage for development of new reprocessable and recyclable ionomer thermosets.more » « less