An official website of the United States government
Radio channel propagation models for the millimeter wave (mmWave) spectrum are extremely important for planning future 5G wireless communication systems. Transmitted radio signals are received as clusters of multipath rays. Identifying these clusters provides better spatial and temporal characteristics of the mmWave channel. This paper deals with the clustering process and its validation across a wide range of frequencies in the mmWave spectrum below 100 GHz. By way of simulations, we show that in outdoor communication scenarios clustering of received rays is influenced by the frequency of the transmitted signal. This demonstrates the sparse characteristic of the mmWave spectrum (i.e., we obtain a lower number of rays at the receiver for the same urban scenario). We use the well-known k-means clustering algorithm to group arriving rays at the receiver. The accuracy of this partitioning is studied with both cluster validity indices (CVIs) and score fusion techniques. Finally, we analyze how the clustering solution changes with narrower-beam antennas, and we provide a comparison of the cluster characteristics for different types of antennas.
more »
« less
Outdoor mmWave Channel Propagation Models using Clustering Algorithms
This paper concerns the task of generating simpler yet accurate mmWave channel models based on clustering all multipath components arriving at the receiver. Our work focuses on 28 GHz communications in urban outdoor scenarios simulated with a ray-tracer tool. We investigate the effectiveness of k- means and k-power-means clustering algorithms in predicting the optimal number of clusters by using cluster validity indices (CVIs) and score fusion techniques. Our results show how the joint use of these techniques generate accurate approximation of the mmWave large-scale and small-scale channel models, greatly simplifying the complexity of analyzing large amount of rays at any receiver location.
more »
« less
- Award ID(s):
- 1925601
- PAR ID:
- 10198844
- Date Published:
- Journal Name:
- 2020 International Conference on Computing, Networking and Communications (ICNC): Wireless Communications
- Page Range / eLocation ID:
- 829-834
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Design and standardization of future millimeter-wave (mmWave) wireless communications systems require accurate models of wireless propagation channels. In particular, comprehensive statistical models describing the effect of human bodies moving randomly in the surrounding environment, acting as reflectors or absorbers, on the received power and delay spread are urgently needed. To enable these, new measurements campaigns are required based on channel sounders designed specifically to capture the realtime dynamics of the channel responses. This paper proposes a new methodology to enable fully dynamic measurements with a pseudonoise (PN)-sequence channel sounder by means of quasi-perfect transmitter-receiver (Tx-Rx) synchronization and suppression of probing signal effects in the post-processed channel impulse responses (CIRs). This approach allows the identification of the weak multipath components (MPCs) originated by reflections on the human body. The approach is validated by analysing CIRs collected in an indoor environment with one person moving close to the 60 GHz link. The results also demonstrate that future mmWave systems could exploit these additional MPCs and benefit from human interactions.more » « less
-
The mmWave WiGig frequency band can support high throughput and low latency emerging applications. In this context, accurate prediction of channel gain enables seamless connectivity with user mobility via proactive handover and beamforming. Machine learning techniques have been widely adopted in literature for mmWave channel prediction. However, the existing techniques assume that the indoor mmWave channel follows a stationary stochastic process. This paper demonstrates that indoor WiGig mmWave channels are non-stationary where the channel’s cumulative distribution function (CDF) changes with the user’s spatio-temporal mobility. Specifically, we show significant differences in the empirical CDF of the channel gain based on the user’s mobility stage, namely, room entering, wandering, and exiting. Thus, the dynamic WiGig mmWave indoor channel suffers from concept drift that impedes the generalization ability of deep learning-based channel prediction models. Our results demonstrate that a state-of-the-art deep learning channel prediction model based on a hybrid convolutional neural network (CNN) long-short-term memory (LSTM) recurrent neural network suffers from a deterioration in the prediction accuracy by 11–68% depending on the user’s mobility stage and the model’s training. To mitigate the negative effect of concept drift and improve the generalization ability of the channel prediction model, we develop a robust deep learning model based on an ensemble strategy. Our results show that the weight average ensemble-based model maintains a stable prediction that keeps the performance deterioration below 4%.more » « less
-
STUDENT PRIZE PAPER AWARD AT CONFERENCE Abstract: This article presents measurement guidelines and verification procedures for antenna cross-polarization discrimination (XPD) and penetration loss measurements for millimeter wave (mmWave) channel sounder systems. These techniques are needed to ensure accurate and consistent measurements by different researchers at different frequencies and bandwidths. Measurements at 73 GHz are used to demonstrate and verify the guidelines, and show the consistency of the antenna XPD factor and the penetration loss at different transmitter-receiver (T-R) separation distances, thus providing a systematic method that may be used at any frequency for reliable field measurementsmore » « less
-
The study of clouds, i.e., where they occur and what are their characteristics, plays a key role in the understanding of climate change. Clustering is a common machine learning technique used in atmospheric science to classify cloud types. Many parallelism techniques e.g., MPI, OpenMP and Spark, could achieve efficient and scalable clustering of large-scale satellite observation data. In order to understand their differences, this paper studies and compares three different approaches on parallel clustering of satellite observation data. Benchmarking experiments with k-means clustering are conducted with three parallelism techniques, namely OpenMP, OpenMP+MPI, and Spark, on a HPC cluster using up to 16 nodes.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1109/ICNC47757.2020.9049734
