Photomechanical molecular crystals have garnered attention for their ability to transform light into mechanical work, but difficulties in characterizing the structural changes and mechanical responses experimentally have hindered the development of practical organic crystal engines. This study proposes a new computational framework for predicting the solid-state crystal-to-crystal photochemical transformations entirely from first principles, and it establishes a photomechanical engine cycle that quantifies the anisotropic mechanical performance resulting from the transformation. The approach relies on crystal structure prediction, solid-state topochemical principles, and high-quality electronic structure methods. After validating the framework on the well-studied [4 + 4] cycloadditions in 9-methyl anthracene and 9- tert -butyl anthracene ester, the experimentally-unknown solid-state transformation of 9-carboxylic acid anthracene is predicted for the first time. The results illustrate how the mechanical work is done by relaxation of the crystal lattice to accommodate the photoproduct, rather than by the photochemistry itself. The large ∼10 7 J m −3 work densities computed for all three systems highlight the promise of photomechanical crystal engines. This study demonstrates the importance of crystal packing in determining molecular crystal engine performance and provides tools and insights to design improved materials in silico .
more »
« less
Bridging photochemistry and photomechanics with NMR crystallography: the molecular basis for the macroscopic expansion of an anthracene ester nanorod
Crystals composed of photoreactive molecules represent a new class of photomechanical materials with the potential to generate large forces on fast timescales. An example is the photodimerization of 9- tert -butyl-anthracene ester ( 9TBAE ) in molecular crystal nanorods that leads to an average elongation of 8%. Previous work showed that this expansion results from the formation of a metastable crystalline product. In this article, it is shown how a novel combination of ensemble oriented-crystal solid-state NMR, X-ray diffraction, and first principles computational modeling can be used to establish the absolute unit cell orientations relative to the shape change, revealing the atomic-resolution mechanism for the photomechanical response and enabling the construction of a model that predicts an elongation of 7.4%, in good agreement with the experimental value. According to this model, the nanorod expansion does not result from an overall change in the volume of the unit cell, but rather from an anisotropic rearrangement of the molecular contents. The ability to understand quantitatively how molecular-level photochemistry generates mechanical displacements allows us to predict that the expansion could be tuned from +9% to −9.5% by controlling the initial orientation of the unit cell with respect to the nanorod axis. This application of NMR-assisted crystallography provides a new tool capable of tying the atomic-level structural rearrangement of the reacting molecular species to the mechanical response of a nanostructured sample.
more »
« less
- PAR ID:
- 10201908
- Date Published:
- Journal Name:
- Chemical Science
- ISSN:
- 2041-6520
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)4-Fluoro-9-anthracenecarboxylic acid ( 4F-9AC ) is a thermally reversible (T-type) photomechanical molecular crystal. The photomechanical response is driven by a [4 + 4] photodimerization reaction, while the photodimer dissociation determines the reset time. In this paper, both the chemical kinetics of dimer dissociation (using a microscopic fluorescence-recovery-after-photobleaching experiment) and mechanical reset dynamics (by imaging bending microneedles) for single 4F-9AC crystals are measured. The dissociation kinetics depend strongly on the initial concentration of photodimer, slowing down and becoming nonexponential at high dimer concentrations. This dose-dependent behavior is also observed in the mechanical response of bending microneedles. A new feature in the photomechanical behavior is identified: the ability of a very weak control beam to suppress dimer dissociation after large initial dimer conversions. This phenomenon provides a way to optically control the mechanical response of this photomechanical crystal. To gain physical insight into the origin of the nonexponential recovery curves, the experimental results are analyzed in terms of a standard first-order kinetic model and a nonlinear Finke–Watzky (FW) model. The FW model can qualitatively reproduce the transition from exponential to sigmoidal recovery with larger initial conversions, but neither model can reproduce the suppression of the recovery in the presence of a weak holding beam. These results highlight the need for more sophisticated theories to describe cooperative phenomena in solid-state crystalline reactions, as well as demonstrating how this behavior could lead to new properties and/or improved performance in photomechanical materials.more » « less
-
null (Ed.)Photomechanical materials exhibit mechanical motion in response to light as an external stimulus. They have attracted much attention because they can convert light energy directly to mechanical energy, and their motions can be controlled without any physical contact. This review paper introduces the photomechanical motions of photoresponsive molecular crystals, especially bending and twisting behaviors, from the viewpoint of symmetry breaking. The bending (right–left symmetry breaking) and twisting (chiral symmetry breaking) of photomechanical crystals are based on both intrinsic and extrinsic factors like molecular orientation in the crystal and illumination conditions. The ability to design and control this symmetry breaking will be vital for generating new science and new technological applications for organic crystalline materials.more » « less
-
null (Ed.)9-Anthracene carboxylic acid derivatives comprise a family of thermally reversible photomechanical molecular crystals. The photomechanical response relies on a [4 + 4] photodimerization followed by dissociation that occurs on timescales of seconds to minutes. A combined theoretical and experimental investigation is undertaken to better understand how chemical modification of the anthracene core influences energetics of both the isolated molecule and the crystal lattice. We use both density functional theory and dispersion-corrected Moller–Plesset perturbation theory computational methods to establish orbital energies, photodimerization reaction energies, and lattice energies for a set of substituted 9-anthracene carboxylic acid molecules. The calculations reveal that steric interactions play a dominant role in the ability to form photodimers and indicate an energetic threshold of 80–90 kJ per mole for the dimerization reaction. Examination of intermolecular bonding in a subset of fluorinated 9ACs revealed the absence of H⋯F intermolecular bond formation and energy differences that can explain observed trends in the dissociation kinetics and mechanical reset times. Fluorescence recovery after photobleaching experiments shows that the photodimer dissociation kinetics depend on the amount of initial photodimer, preventing a straightforward correlation between halogen atom substitution and dissociation rates using the Bell–Evans–Polanyi principle. The results clarify how molecular structure affects intermolecular interactions and photoreactivity in this family of molecular crystals, but the origin of the complex photodimer dissociation dynamics remains an open question.more » « less
-
more » « less
Abstract Molecular motors (MM) are molecular machines, or nanomachines, that rotate unidirectionally upon photostimulation and perform mechanical work on their environment. In the last several years, it has been shown that the photomechanical action of MM can be used to permeabilize lipid bilayers, thereby killing cancer cells and pathogenic microorganisms and controlling cell signaling. The work contributes to a growing acknowledgement that the molecular actuation characteristic of these systems is useful for various applications in biology. However, the mechanical effects of molecular motion on biological materials are difficult to disentangle from photodynamic and photothermal action, which are also present when a light‐absorbing fluorophore is irradiated with light. Here, an overview of the key methods used by various research groups to distinguish the effects of photomechanical, photodynamic, and photothermal action is provided. It is anticipated that this discussion will be helpful to the community seeking to use MM to develop new and distinctive medical technologies that result from mechanical disruption of biological materials.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/d0sc05118g
