skip to main content

Explore Research Products in the NSF-PAR

Title: All-PEGylated redox-active metal-free organic molecules in non-aqueous redox flow battery
Non-aqueous organic material-based redox flow batteries (NAORFBs) possess the advantage of using organic solvents to achieve high electrochemical potential. However, regardless of the great progress made in this regard in the past decade, further development has been restricted by the lack of stable electroactive organic materials and highly selective separators. Here, we present a NAORFB with all-PEGylated, metal-free, organic compounds as electroactive materials. PEGylated phenothiazine and PEGylated viologen are utilized as the catholyte and anolyte, respectively. Combined with a composite nanoporous aramid nanofiber separator, the all-PEGylated NAORFB presents outstanding cyclability, with a capacity retention of 99.90% per cycle and average coulombic efficiency of 99.7%. By contrast, NAORFBs using half-PEGylated and non-PEGylated electrolytes display inferior cyclability owing to the crossover of non-PEGylated materials. An extended investigation was also performed on the batteries using non-PEGylated or half-PEGylated materials for mechanistic elucidation. This work validates the PEGylation strategy in NAORFBs for enhanced overall performance with respect to solubility, cyclability, and alleviated crossover.  more » « less
Award ID(s):
1726092
NSF-PAR ID:
10205261
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Journal of Materials Chemistry A
Volume:
8
Issue:
31
ISSN:
2050-7488
Page Range / eLocation ID:
15715 to 15724
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ( , Batteries & Supercaps)
    Abstract

    Long duration storage batteries such as Redox Flow Batteries (RFBs) are promising storage system to address the energy storage requirement that our society will require in the years to come. Recent effort has been focused on the development of metal free and high energy density system such as all‐organic non‐aqueous redox flow batteries (NAORFBs). However high‐voltage NAORFBs currently use distinct anolytes and catholytes, which are separated by a membrane sensitive to osmotic pressure, resulting in rapid capacity and energy density degradation over time. To address this issue, symmetric organic redox flow batteries (SORFBs) have been proposed as an elegant solution. We have introduced dimethoxyquinacridiniums (DMQA+) ions as efficient bipolar redox molecules (BRMs) in static H‐cell conditions. In this study, we present the first application of DMQA+ions in a complete flow RFB prototype, showcasing their ability to operate with polarity reversal. Key kinetic properties were evaluated through cyclic voltammetry and DFT calculations. While coulombic and energy efficiency metrics were moderate, pegylated DMQA+demonstrated impressive capacity retention of over 99.99 % and the capability to operate under polarity inversion, making it a highly attractive choice for grid‐scale, long‐lifespan energy storage applications.

     
    more » « less
  2. ; ; ( , Journal of The Electrochemical Society)

    Chemical redox reactions between redox shuttles and lithium-ion battery particles have applications in electrochemical systems including redox-mediated flow batteries, photo-assisted lithium-ion batteries, and lithium-ion battery overcharge protection. These previous studies, combined with interest in chemical redox of battery materials in general, has resulted in previous reports of the chemical oxidation and/or reduction of solid lithium-ion materials. However, in many of these reports, a single redox shuttle is the focus and/or the experimental conditions are relatively limited. Herein, a study of chemical redox for a series of redox shuttles reacted with a lithium-ion battery cathode material will be reported. Both oxidation and reduction of the solid material with redox shuttles as a function of time will be probed using ferrocene derivatives with different half-wave potentials. The progression of the chemical redox was tracked by using electrochemical analysis of the redox shuttles in a custom electrochemical cell, and rate constants for chemical redox were extracted from using two different models. This study provides evidence that redox shuttle-particle interactions play a role in the overall reaction rate, and more broadly support that this experimental method dependent on electrochemical analysis can be applied for comparison of redox shuttles reacting with solid electroactive materials.

     
    more » « less
  3. ; ; ; ; ; ; ( , Materials Advances)
    Non-aqueous organic redox flow batteries (NAORFBs) are considered emerging large-scale energy storage systems due to their larger voltage window as compared to aqueous systems and their metal-free nature. However, low solubility, sustainability, and crossover of redox materials remain major challenges for the development of NAORFBs. Here, we report the use of redox active α-helical polypeptides suitable for NAORFBs. The polypeptides exhibit less crossover than small molecule analogs for both Daramic 175 separator and FAPQ 375 PP membrane, with FAPQ 375 PP preventing crossover most effectivley. Polypeptide NAORFBs assembled with a TEMPO-based polypeptide catholyte and viologen-based polypeptide anolyte exhibit low capacity fade ( ca. 0.1% per cycle over 500 cycles) and high coulombic efficiency (>99.5%). The polypeptide NAORFBs exhibit an output voltage of 1.1 V with a maximum capacity of 0.53 A h L −1 (39% of the theoretical capacity). After 500 charge–discharge cycles, 60% of the initial capacity was retained. Post cycling analysis using spectral and electrochemical methods demonstrate that the polypeptide backbone and the ester side chain linkages are stable during electrochemical cycling. Taken together, these polypeptides offer naturally-derived, deconstructable platforms for addressing the needs of metal-free energy storage. 
    more » « less
  4. ; ; ; ; ; ; ; ( , Advanced Functional Materials)
    Abstract

    An extremely stable, energy‐dense (53.6 Ah L−1, 2 mtransferrable electrons), low crossover (permeability of <1 × 10−13 cm2 s−1using Nafion 212 (Nafion is a trademark polymer from DuPont)), and potentially inexpensive anthraquinone with 2‐2‐propionate ether anthraquinone structure (abbreviated 2‐2PEAQ) is synthesized and extensively evaluated under practically relevant conditions for use in the negolyte of an aqueous redox flow battery. 2‐2PEAQ shows a high stability with a fade rate of 0.03–0.05% per day at different applied current densities, cut‐off voltage windows, and concentrations (0.1 and 1.0 m) in both a full cell paired with a ferro/ferricyanide posolyte as well as a symmetric cell. 2‐2PEAQ is further shown to have extreme long‐term stability, losing only ≈0.01% per day when an electrochemical rejuvenation strategy is employed. From post‐mortem analysis (nuclear magnetic resonance (NMR), liquid chromatography–mass spectrometry (LC‐MS), and cyclic voltammetry (CV)) two degradation mechanisms are deduced: side chain loss and anthrone formation. 2‐2PEAQ with the ether linkages attached on carbons non‐adjacent to the central ring is found to have three times lower fade rate compared to its isomer with ether linkages on the carbon adjacent to the central quinone ring. The present study introduces a viable negolyte candidate for grid‐scale aqueous organic redox flow batteries.

     
    more » « less
  5. ; ; ; ; ; ; ; ( , Advanced Energy Materials)
    Abstract

    Redox meditators (RMs) are soluble catalysts located in an electrolyte that can improve the energy efficiency (reduced overpotential) and cyclability of Li–oxygen (Li–O2) batteries. In this work, 20 RMs within a Li–O2system with dimethyl sulfoxide and tetraethylene glycol dimethyl ether electrolytes are studied and their electrochemical features such as redox potential, the separation of cathodic and anodic peaks, and their current intensities are measured using cyclic voltammetry (CV) experiments. Six RMs are selected as “primary” choices based on their electrochemical performance, and stability tests are then performed to examine their electrochemical responses after consecutive cycles. Moreover, galvanostatic cycling tests are performed within a Li–O2battery system assembled with selected six RMs for real case consistency investigations. It is found that results from CV to galvanostatic cycling tests are consistent for halides and organometallic RMs, where the former exhibit much higher stability. However, the organic RMs show high reversibility in CV but low in battery cycling results. Density functional theory calculations are carried out to gain more understanding of the stability and redox potentials of the RMs. This study provides comparative information to select the most reliable RMs for Li–O2batteries along with new fundamental understanding of their electrochemical activity and stability.

     
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email