skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Understanding and Controlling the Performance-Limiting Steps of Catalyst-Modified Semiconductors
Understanding and controlling factors that restrict the rates of fuel-forming reactions are essential to designing effective catalyst-modified semiconductors for applications in solar-to-fuel technologies. Herein, we describe GaAs semiconductors featuring a polymeric coating that contains cobaloxime-type catalysts for photoelectrochemically powering hydrogen production. The activities of these electrodes (limiting current densities >20 mA cm–2 under 1-sun illumination) enable identification of fundamental performance-limiting bottlenecks encountered at relatively high rates of fuel formation. Experiments conducted under varying bias potential, pH, illumination intensity, and scan rate reveal two distinct mechanisms of photoelectrochemical hydrogen production. At relatively low polarization and pH, the limiting photoactivity is independent of illumination conditions and is attributed to a mechanism involving reduction of substrate protons. At relatively high polarization or pH, the limiting photoactivity shows a linear response to increasing photon flux and is attributed to a mechanism involving reduction of substrate water. This work illustrates the complex interplay between transport of photons, electrons, and chemical substrates in photoelectrosynthetic reactions and highlights diagnostic tools for better understanding these processes.  more » « less
Award ID(s):
1653982
PAR ID:
10206984
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
The Journal of Physical Chemistry Letters
ISSN:
1948-7185
Page Range / eLocation ID:
199 to 203
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Abstract of Papers, 235th Electrochemical Society Meeting)
    Chemical modification of semiconductor surfaces with electrocatalysts provides a strategy for developing integrated materials capable of converting sunlight to fuels and other value-added products, but their development is hampered by an incomplete understanding of the factors limiting their performance. Although kinetic models have been separately developed to describe photoelectrochemical or homogeneous electrocatalytic reactions, related modeling for molecular-modified photoelectrodes has not been as extensively elaborated. This work addresses kinetic parameters pertinent to heterogeneous-homogeneous catalysis at molecular-modified semiconductors. Photoelectrosynthetic hydrogen evolution using a cobalt porphyrin-modified gallium phosphide cathode is analyzed under variable scan rates, pH values, and light intensity, yielding information on the relationship between the external quantum efficiency, illumination conditions, and turnover frequency. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, ACS Applied Energy Materials)
    Metal oxide semiconductors have attracted much attention due to their versatility in different applications, ranging from biosensing to green energy-harvesting technologies. Among these metal oxides, oxide-based diluted magnetic semiconductors have also been proposed for fuel cell applications, especially for the oxygen reduction reaction (ORR) and the oxygen evolution reaction. However, the catalytic mechanism has been proposed to follow a two-electron pathway, forming hydrogen peroxide, instead of the four-electron pathway. Herein, we report cobalt-doped zinc oxide (CoxZn1–xO, 0 < x < 0.018) materials prepared using a co-precipitation method suitable for the electrocatalytic production of hydrogen peroxide. The electrocatalytic performance of CoxZn1–xO materials showed up to 60% hydrogen peroxide production with onset potentials near 649 mV, followed by the two-electron ORR mechanism. Ex situ X-ray absorption spectroscopy experiments at the Co K-edge demonstrated the presence of Co(II) ions at tetrahedral sites within the ZnO lattice. 
    more » « less
  3. ; ; ; ; ; ; ; ; (, Catalysts)
    Cobalt-based catalysts are recognized as promising electrocatalysts for oxygen reduction reactions (ORRs) in fuel cells that operate within acidic electrolytes. A synthesis process involving a cobalt complex, nanocellulose, and dopamine, followed by pyrolysis at 500 °C under a nitrogen atmosphere, was used to create a cobalt and nitrogen-doped carbonaceous material. Additionally, urea was incorporated to enhance nitrogen doping in the carbonaceous material. The morphology and structure of the material were examined using Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD), where SEM unveiled dispersed metal oxides within the carbonaceous framework. Energy Dispersive X-ray Spectroscopy (EDS) analysis showed an even distribution of elements across the cobalt-doped carbonaceous material. X-ray Photoelectron Spectroscopy (XPS) analysis further highlighted significant alterations in the elemental composition due to pyrolysis. The electrochemical behavior of the cobalt-doped carbonaceous material, with respect to the oxygen reduction reaction (ORR) in an acidic medium, was investigated via cyclic voltammetry (CV), revealing an ORR peak at 0.30 V against a reversible hydrogen reference electrode, accompanied by a notably high current density. The catalyst’s performance was evaluated across different pH levels and with various layers deposited, showing enhanced effectiveness in acidic conditions and a more pronounced reduction peak with uniformly applied electrode layers. Rotating disk electrode (RDE) studies corroborated the mechanism of a four-electron reduction of oxygen to water, emphasizing the catalyst’s efficiency. 
    more » « less
  4. ; ; (, Atmospheric Chemistry and Physics)
    null (Ed.)
    Abstract. The mechanisms of molecular halogen production from frozen saline surfacesremain incompletely understood, limiting our ability to predict atmosphericoxidation and composition in polar regions. In this laboratory study,condensed-phase hydroxyl radicals (OH) were photochemically generated infrozen saltwater solutions that mimicked the ionic composition of oceanwater. These hydroxyl radicals were found to oxidize Cl−, Br−, andI−, leading to the release of Cl2, Br2, I2, and IBr. Atmoderately acidic pH (buffered between 4.5 and 4.8), irradiation of icecontaining OH precursors (either of hydrogen peroxide or nitrite ion)produced elevated amounts of I2. Subsequent addition of O3produced additional I2, as well as small amounts of Br2. At lowerpH (1.7–2.2) and in the presence of an OH precursor, rapid dark conversionof I− to I2 occurred from reactions with hydrogen peroxide ornitrite, followed by substantial photochemical production of Br2 uponirradiation. Exposure to O3 under these low pH conditions alsoincreased production of Br2 and I2; this likely results fromdirect O3 reactions with halides, as well as the production ofgas-phase HOBr and HOI that subsequently diffuse to frozen solution to reactwith Br− and I−. Photochemical production of Cl2 was onlyobserved when the irradiated sample was composed of high-purity NaCl andhydrogen peroxide (acting as the OH precursor) at pH = 1.8. Thoughcondensed-phase OH was shown to produce Cl2 in this study, kineticscalculations suggest that heterogeneous recycling chemistry may be equallyor more important for Cl2 production in the Arctic atmosphere. Thecondensed-phase OH-mediated halogen production mechanisms demonstrated hereare consistent with those proposed from recent Arctic field observations ofmolecular halogen production from snowpacks. These reactions, even if slow,may be important for providing seed halogens to the Arctic atmosphere. Ourresults suggest the observed molecular halogen products are dependent on therelative concentrations of halides at the ice surface, as we only observewhat diffuses to the air–surface interface. 
    more » « less
  5. ; ; ; ; ; ; ; ; (, Angewandte Chemie International Edition)
    Abstract Photothermal CO2reduction is one of the most promising routes to efficiently utilize solar energy for fuel production at high rates. However, this reaction is currently limited by underdeveloped catalysts with low photothermal conversion efficiency, insufficient exposure of active sites, low active material loading, and high material cost. Herein, we report a potassium‐modified carbon‐supported cobalt (K+−Co−C) catalyst mimicking the structure of a lotus pod that addresses these challenges. As a result of the designed lotus‐pod structure which features an efficient photothermal C substrate with hierarchical pores, an intimate Co/C interface with covalent bonding, and exposed Co catalytic sites with optimized CO binding strength, the K+−Co−C catalyst shows a record‐high photothermal CO2hydrogenation rate of 758 mmol gcat−1 h−1(2871 mmol gCo−1 h−1) with a 99.8 % selectivity for CO, three orders of magnitude higher than typical photochemical CO2reduction reactions. We further demonstrate with this catalyst effective CO2conversion under natural sunlight one hour before sunset during the winter season, putting forward an important step towards practical solar fuel production. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email