An official website of the United States government
This paper presents a 3D model of a terahertz photoconductive antenna (PCA) using black phosphorus, an emerging 2D anisotropic material, as the semiconductor layer. This work aims at understanding the potential of black phosphorus (BP) to advance the signal generation and bandwidth of conventional terahertz (THz) PCAs. The COMSOL Multiphysics package, based on the finite element method, is utilized to model the 3D BP PCA emitter using four modules: the frequency domain RF module to solve Maxwell’s equations, the semiconductor module to calculate the photocurrent, the heat transfer in solids module to calculate the temperature variations, and the transient RF module to calculate the THz radiated electric field pulse. The proposed 3D model is computationally intensive where the PCA device includes thin layers of thicknesses ranging from nano- to microscale. The symmetry of the configuration was exploited by applying the perfect electric and magnetic boundary conditions to reduce the computational domain to only one quarter of the device in the RF module. The results showed that the temperature variation due to the conduction of current induced by the bias voltage increased by only 0.162 K. In addition, the electromagnetic power dissipation in the semiconductor due to the femtosecond laser source showed an increase in temperature by 0.441 K. The results show that the temperature variations caused the peak of the photocurrent to increase by and , respectively, under a maximum bias voltage of 1 V and average laser power of 1 mW. While simulating the active area of the antenna provided accurate results for the optical and semiconductor responses, simulating the thermal effect on the photocurrent requires a larger computational domain to avoid false rise in temperature. Finally, the simulated THz signal generation electric field pulse exhibits a trend in increasing the bandwidth of the proposed BP PCA compared with the measured pulse of a reference commercial LT-GaAs PCA. Enhancing signal generation and bandwidth will improve THz imaging and spectroscopy for biomedical and material characterization applications.
more »
« less
Analysis of Black Phosphorus Terahertz Photoconductive Antenna
This paper presents a parametric analysis of a photoconductive antenna that implements the 2-D material black phosphorus (BP). This material fills the gap between the electrodes of the antenna. The study involves modeling and simulation of the device using COMSOL Multiphysics at different bias voltages. We present the calculations of the photocurrent density versus time at the center of the gap in the BP layer, and the maximum photocurrent density value measured over time for multiple bias voltages. The results showed a saturation behavior versus bias voltage.
more »
« less
- Award ID(s):
- 1948255
- PAR ID:
- 10208972
- Date Published:
- Journal Name:
- IEEE Antennas and Propagation Conference
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Gennarelli, Claudio (Ed.)The work presents the fabrication and measurements of four LT-GaAs photoconductive terahertz (THz) antennas with different geometries of metallic electrodes. The goal is to analyze the overall bandwidth of the antennas through a comparison between the spectra of the generated photocurrent in the antenna gap, the radiated electric field THz pulse, and the S11 parameter of the metallic electrodes. The photocurrent density and the S11 parameters are computed using COMSOL multiphysics, while the generated THz pulse was experimentally measured using a time-domain spectroscopy system. The polarizations of the photoconductive antennas are experimentally measured, using x-cut quartz crystal halfwave plates, showing polarization in the direction of the electrode’s long axis. Pinholes are used to verify system alignment and quality of the radiated signal spectra. The results show that the spectra of the radiated THz pulses in all four antennas considered in this work are dominated by the behavior of the S11 parameter at the lower part of the frequency band, but with the decreasing photocurrent dominating the spectra at higher frequencies.more » « less
-
Electronegative inductively coupled plasmas (ICPs) are used for conductor etching in the microelectronics industry for semiconductor fabrication. Pulsing of the antenna power and bias voltages provides additional control for optimizing plasma–surface interactions. However, pulsed ICPs are susceptible to capacitive-to-inductive mode transitions at the onset of the power pulse due to there being low electron densities at the end of the prior afterglow. The capacitive (E) to inductive (H) mode transition is sensitive to the spatial configuration of the plasma at the end of the prior afterglow, circuit (matchbox) settings, operating conditions, and reactor configurations, including antenna geometry. In this paper, we discuss results from a computational investigation of E–H transitions in pulsed ICPs sustained in Ar/Cl2 and Ar/O2 gas mixtures while varying operating conditions, including gas mixture, pulse repetition frequency, duty cycle of the power pulse, and antenna geometry. Pulsed ICPs sustained in Ar/Cl2 mixtures are prone to significant E–H transitions due to thermal dissociative attachment reactions with Cl2 during the afterglow which reduce pre-pulse electron densities. These abrupt E–H transitions launch electrostatic waves from the formation of a sheath at the boundaries of the plasma and under the antenna in particular. The smoother E–H transitions observed for Ar/O2 mixture results from the higher electron density at the start of the power pulse due to the lack of thermal electron attaching reactions to O2. Ion energy and angular distributions (IEADs) incident onto the wafer and the dielectric window under the antenna are discussed. The shape of the antenna influences the severity of the E–H transition and the IEADs, with antennas having larger surface areas facing the plasma producing larger capacitive coupling. Validation of the model is performed by comparison of computed electron densities with experimental measurements.more » « less
-
Abstract Using lead phthalocyanine (PbPc) as surface doping material on black phosphorous (BP) we observe enhanced photo-excited carriers in the PbPc/BP heterostructure. The interfacial energy level alignment is investigated with ultra violet photoemission spectroscopy (UPS) and x-ray photoemission spectroscopy (XPS). The heterojunction is type I with gap of BP nested in that of PbPc, facilitating confinement of electrons and holes in BP. Ultrafast time-resolved two-photon photoemission (TR-2PPE) spectroscopy is used to study the influence of PbPc on the photo excited unoccupied electronic states and the dynamics of the relaxation processes. Monolayer PbPc can greatly increase the pump excited hot electrons and the 2 photon emission of BP. The enhanced population in the intermediate states is attributed to the straddling of the band alignment which benefits the photo excited electrons in PbPc transferring to BP. Density functional theory calculations supported the interface dipole and charge redistribution. Our results provide a fundamental understanding of the excellent opto-electrical response of PbPc/BP interface of promising application in the high efficient photo detectors.more » « less
-
Abstract The presence of in-plane chiral effects, hence spin–orbit coupling, is evident in the changes in the photocurrent produced in a TiS 3 (001) field-effect phototransistor with left versus right circularly polarized light. The direction of the photocurrent is protected by the presence of strong spin–orbit coupling and the anisotropy of the band structure as indicated in NanoARPES measurements. Dark electronic transport measurements indicate that TiS 3 is n-type and has an electron mobility in the range of 1–6 cm 2 V −1 s −1 . I – V measurements under laser illumination indicate the photocurrent exhibits a bias directionality dependence, reminiscent of bipolar spin diode behavior. Because the TiS 3 contains no heavy elements, the presence of spin–orbit coupling must be attributed to the observed loss of inversion symmetry at the TiS 3 (001) surface.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- The DOI is not currently available.
