skip to main content


Title: Black phosphorus photoconductive terahertz antenna: 3D modeling and experimental reference comparison

This paper presents a 3D model of a terahertz photoconductive antenna (PCA) using black phosphorus, an emerging 2D anisotropic material, as the semiconductor layer. This work aims at understanding the potential of black phosphorus (BP) to advance the signal generation and bandwidth of conventional terahertz (THz) PCAs. The COMSOL Multiphysics package, based on the finite element method, is utilized to model the 3D BP PCA emitter using four modules: the frequency domain RF module to solve Maxwell’s equations, the semiconductor module to calculate the photocurrent, the heat transfer in solids module to calculate the temperature variations, and the transient RF module to calculate the THz radiated electric field pulse. The proposed 3D model is computationally intensive where the PCA device includes thin layers of thicknesses ranging from nano- to microscale. The symmetry of the configuration was exploited by applying the perfect electric and magnetic boundary conditions to reduce the computational domain to only one quarter of the device in the RF module. The results showed that the temperature variation due to the conduction of current induced by the bias voltage increased by only 0.162 K. In addition, the electromagnetic power dissipation in the semiconductor due to the femtosecond laser source showed an increase in temperature by 0.441 K. The results show that the temperature variations caused the peak of the photocurrent to increase by∼<#comment/>3.4%<#comment/>and∼<#comment/>10%<#comment/>, respectively, under a maximum bias voltage of 1 V and average laser power of 1 mW. While simulating the active area of the antenna provided accurate results for the optical and semiconductor responses, simulating the thermal effect on the photocurrent requires a larger computational domain to avoid false rise in temperature. Finally, the simulated THz signal generation electric field pulse exhibits a trend in increasing the bandwidth of the proposed BP PCA compared with the measured pulse of a reference commercial LT-GaAs PCA. Enhancing signal generation and bandwidth will improve THz imaging and spectroscopy for biomedical and material characterization applications.

 
more » « less
Award ID(s):
1948255
NSF-PAR ID:
10219502
Author(s) / Creator(s):
; ;
Publisher / Repository:
Optical Society of America
Date Published:
Journal Name:
Journal of the Optical Society of America B
Volume:
38
Issue:
4
ISSN:
0740-3224; JOBPDE
Page Range / eLocation ID:
Article No. 1367
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. We characterize a terahertz (THz) source based on plasma in liquid gallium. The dependence of the emitted THz pulse energy on second-order phase, pump pulse energy, and polarization of the short laser pulse is demonstrated. Our study suggests that the THz emission mechanism is due to the ponderomotive force and is aided by a direct-field driven term. The proposed source and accompanying generation mechanism are studied under a non-relativistic regime (1015<<#comment/>I<<#comment/>1018W/cm2) for forward directed THz under a single pump excitation scheme.

     
    more » « less
  2. Electro-optic (EO) modulators rely on the interaction of optical and electrical signals with second-order nonlinear media. For the optical signal, this interaction can be strongly enhanced using dielectric slot–waveguide structures that exploit a field discontinuity at the interface between a high-index waveguide core and the low-index EO cladding. In contrast to this, the electrical signal is usually applied through conductive regions in the direct vicinity of the optical waveguide. To avoid excessive optical loss, the conductivity of these regions is maintained at a moderate level, thus leading to inherentRClimitations of the modulation bandwidth. In this paper, we show that these limitations can be overcome by extending the slot–waveguide concept to the modulating radio-frequency (RF) signal. Our device combines an RF slotline that relies onBaTiO3as a high-k dielectric material with a conventional silicon photonic slot waveguide and a highly efficient organic EO cladding material. In a proof-of-concept experiment, we demonstrate a 1 mm long Mach–Zehnder modulator that offers a 3 dB bandwidth of 76 GHz and a 6 dB bandwidth of 110 GHz along with a smallπ<#comment/>voltage of 1.3 V (Uπ<#comment/>L=1.3Vmm). We further demonstrate the viability of the device in a data-transmission experiment using four-state pulse-amplitude modulation (PAM4) at line rates up to 200 Gbit/s. Our first-generation devices leave vast room for further improvement and may open an attractive route towards highly efficient silicon photonic modulators that combine sub-1 mm device lengths with sub-1 V drive voltages and modulation bandwidths of more than 100 GHz.

     
    more » « less
  3. In terahertz (THz) photonics, there is an ongoing effort to develop thin, compact devices such as dielectric photonic crystal (PhC) slabs with desirable light–matter interactions. However, previous works in THz PhC slabs have been limited to rigid substrates with thicknesses∼<#comment/>100sof micrometers. Dielectric PhC slabs have been shown to possess in-plane modes that are excited by external radiation to produce sharp guided-mode resonances with minimal absorption for applications in sensors, optics, and lasers. Here we confirm the existence of guided resonances in a membrane-type THz PhC slab with subwavelength (λ<#comment/>0/6−<#comment/>λ<#comment/>0/12) thicknesses of flexible dielectric polyimide films. The transmittance of the guided resonances was measured for different structural parameters of the unit cell. Furthermore, we exploited the flexibility of the samples to modulate the guided modes for a bend angle ofθ<#comment/>≥<#comment/>5∘<#comment/>, confirmed experimentally by the suppression of these modes. The mechanical flexibility of the device allows for an additional degree of freedom in system design for high-speed communications, soft wearable photonics, and implantable medical devices.

     
    more » « less
  4. For easy manipulation of polarization states of light for applications in communications, imaging, and information processing, an efficient mechanism is desired for rotating light polarization with a minimum interaction length. Here, we report giant polarization rotations for terahertz (THz) electromagnetic waves in ultrathin (∼<#comment/>45nm), high-density films of aligned carbon nanotubes. We observed polarization rotations of up to∼<#comment/>20∘<#comment/>and∼<#comment/>110∘<#comment/>for transmitted and reflected THz pulses, respectively. The amount of polarization rotation was a sensitive function of the angle between the incident THz polarization and the nanotube alignment direction, exhibiting a “magic” angle at which the total rotation through transmission and reflection becomes exactly 90°. Our model quantitatively explains these giant rotations as a result of extremely anisotropic optical constants, demonstrating that aligned carbon nanotubes promise ultrathin, broadband, and tunable THz polarization devices.

     
    more » « less
  5. Wavelength beam-combining of four terahertz (THz) distributed-feedback quantum-cascade lasers (QCLs) is demonstrated using low-cost THz components that include a lens carved out of a plastic ball and a mechanically fabricated blazed grating. Single-lobed beams from predominantly single-mode QCLs radiating peak power in the range of50−<#comment/>170mWare overlapped in the far field at frequencies ranging from3.31−<#comment/>3.54THz. Collinear propagation with a maximum angular deviation of0.3∘<#comment/>is realized for the four beams. The total power efficiency for the focused and beam-combined radiation is as high as25%<#comment/>. This result could pave the way for future commercialization of beam-combined monolithic THz QCL arrays for multi-spectral THz sensing and spectroscopy at standoff distances.

     
    more » « less