More Like this

1. Mechanical and electrical properties of MWCNT/PP films and structural health monitoring of GF/PP joints

   Li, W. ; Palardy, G. ( November 2021 , SPE Automotive Composites Conference & Exhibition)

   Online repository: https://speautomotive.com/acce-conference/2021-acce-papers-and-program-guides/ and also on: arXiv:2204.00909. Abstract: While welding of thermoplastic composites (TPCs) is a promising rivetless method to reduce weight, higher confidence in joints’ structural integrity and failure prediction must be achieved for widespread use in industry. In this work, we present an innovative study on damage detection for ultrasonically welded TPC joints with multi-walled carbon nanotubes (MWCNTs) and embedded buckypaper films. MWCNTs show promise for structural health monitoring (SHM) of composite joints, assembled by adhesive bonding or fusion bonding, through electrical resistance changes. This study focuses on investigating multifunctional films and their suitability for ultrasonic welding (USW) of TPCs, using two approaches: 1) MWCNT-filled polypropylene (PP) nanocomposites prepared via solvent dispersion, and 2) high conductivity MWCNT buckypaper embedded between PP films by hot pressing. Nanocomposite formulations containing 5 wt% and 10 wt% MWCNTs were synthesized using solvent dispersion method, followed by compression molding to manufacture films. The effect of MWCNT concentration on electrical and dynamic mechanical behavior of multifunctional films was examined with a Sourcemeter and Dynamic Mechanical Analyzer, and a comparison was made between 5 - 20 wt% MWCNT/PP films based on previous research. Glass fiber/polypropylene (GF/PP) composite joints were ultrasonically welded in a single lap shear configuration using buckypaper and MWCNT/PP films. Furthermore, electrical resistance measurements were carried out for joints under bending loads. It was observed that 15 wt% and 20 wt% MWCNT/PP films had higher stability and sensitivity for resistance response than embedded buckypaper and films with low MWCNT contents, demonstrating their suitability for USW and potential for SHM. 

   more » « less
2. Carbon–titanium dioxide (C/TiO 2 ) nanofiber composites for chemical oxidation of emerging organic contaminants in reactive filtration applications

   https://doi.org/10.1039/D0EN00975J  

   Greenstein, Katherine E. ; Nagorzanski, Matthew R. ; Kelsay, Bailey ; Verdugo, Edgard M. ; Myung, Nosang V. ; Parkin, Gene F. ; Cwiertny, David M. ( March 2021 , Environmental Science: Nano)

   null (Ed.)

   The recalcitrance of some emerging organic contaminants through conventional water treatment systems may necessitate advanced technologies that use highly reactive, non-specific hydroxyl radicals. Here, polyacrylonitrile (PAN) nanofibers with embedded titanium dioxide (TiO 2 ) nanoparticles were synthesized via electrospinning and subsequently carbonized to produce mechanically stable carbon/TiO 2 (C/TiO 2 ) nanofiber composite filters. Nanofiber composites were optimized for reactivity in flow through treatment systems by varying their mass loading of TiO 2 , adding phthalic acid (PTA) as a dispersing agent for nanoparticles in electrospinning sol gels, comparing different types of commercially available TiO 2 nanoparticles (Aeroxide® P25 and 5 nm anatase nanoparticles) and through functionalization with gold (Au/TiO 2 ) as a co-catalyst. High bulk and surface TiO 2 concentrations correspond with enhanced nanofiber reactivity, while PTA as a dispersant makes it possible to fabricate materials at very high P25 loadings (∼80% wt%). The optimal composite formulation (50 wt% P25 with 2.5 wt% PTA) combining high reactivity and material stability was then tested across a range of variables relevant to filtration applications including filter thickness (300–1800 μm), permeate flux (from 540–2700 L m −2 h), incident light energy (UV-254 and simulated sunlight), flow configuration (dead-end and cross-flow filtration), presence of potentially interfering co-solutes (dissolved organic matter and carbonate alkalinity), and across a suite of eight organic micropollutants (atrazine, benzotriazole, caffeine, carbamazepine, DEET, metoprolol, naproxen, and sulfamethoxazole). During cross-flow recirculation under UV-irradiation, 300 μm thick filters (30 mg total mass) produced micropollutant half-lives ∼45 min, with 40–90% removal (from an initial 0.5 μM concentration) in a single pass through the filter. The initial reaction rate coefficients of micropollutant transformation did not clearly correlate with reported second order rate coefficients for reaction with hydroxyl radical ( k OH ), implying that processes other than reaction with photogenerated hydroxyl radical ( e.g. , surface sorption) may control the overall rate of transformation. The materials developed herein represent a promising next-generation filtration technology that integrates photocatalytic activity in a robust platform for nanomaterial-enabled water treatment. 

   more » « less
3. Enhanced charge separation in TiO 2 /nanocarbon hybrid photocatalysts through coupling with short carbon nanotubes

   https://doi.org/10.1039/d1ra00045d  

   Al Mayyahi, Ahmed ; Everhart, Brian M. ; Shrestha, Tej B. ; Back, Tyson C. ; Amama, Placidus B. ( March 2021 , RSC Advances)

   The interfacial contact between TiO 2 and graphitic carbon in a hybrid composite plays a critical role in electron transfer behavior, and in turn, its photocatalytic efficiency. Herein, we report a new approach for improving the interfacial contact and delaying charge carrier recombination in the hybrid by wrapping short single-wall carbon nanotubes (SWCNTs) on TiO 2 particles (100 nm) via a hydration-condensation technique. Short SWCNTs with an average length of 125 ± 90 nm were obtained from an ultrasonication-assisted cutting process of pristine SWCNTs (1–3 μm in length). In comparison to conventional TiO 2 –SWCNT composites synthesized from long SWCNTs (1.2 ± 0.7 μm), TiO 2 wrapped with short SWCNTs showed longer lifetimes of photogenerated electrons and holes, as well as a superior photocatalytic activity in the gas-phase degradation of acetaldehyde. In addition, upon comparison with a TiO 2 –nanographene “quasi-core–shell” structure, TiO 2 -short SWCNT structures offer better electron-capturing efficiency and slightly higher photocatalytic performance, revealing the impact of the dimensions of graphitic structures on the interfacial transfer of electrons and light penetration to TiO 2 . The engineering of the TiO 2 –SWCNT structure is expected to benefit photocatalytic degradation of other volatile organic compounds, and provide alternative pathways to further improve the efficiency of other carbon-based photocatalysts. 

   more » « less
4. Flux‐mediated synthesis and photocatalytic activity of NaNbO 3 particles

   https://doi.org/10.1111/jace.16765  

   Hamilton, Adam M. ; O'Donnell, Shaun ; Zoellner, Brandon ; Sullivan, Ian ; Maggard, Paul A. ( September 2019 , Journal of the American Ceramic Society)

   Using molten‐salt synthetic techniques, NaNbO₃(Space groupPbcm; No. 57) was prepared in high purity at a reaction time of 12 hours and a temperature of 900°C. All NaNbO₃products were prepared from stoichiometric ratios of Nb₂O₅and Na₂CO₃together with the addition of a salt flux introduced at a 10:1 molar ratio of salt to NaNbO₃, that is, using the Na₂SO₄, NaF, NaCl, and NaBr salts. A solid‐state synthesis was performed in the absence of a molten salt to serve as a control. The reaction products were all found to be phase pure through powder X‐ray diffraction, for example, with refined lattice constants ofa = 5.512(5) Å,b = 5.567(3) Å, andc = 15.516(8) Å from the Na₂SO₄salt reaction. The products were characterized using UV‐Vis diffuse reflectance spectroscopy to have a bandgap size of ~3.5 eV. The particles sizes were analyzed by scanning electron microscopy (SEM) and found to be dependent upon the flux type used, from ~<1 μm to >10 μm in length, with overall surface areas that could be varied from 0.66 m²/g (for NaF) to 1.55 m²/g (for NaBr). Cubic‐shaped particle morphologies were observed for the metal halide salts with the set of exposed (100)/(010)/(001) crystal facets, while a truncated octahedral morphology formed in the sodium sulfate salt reaction with predominantly the set of (110)/(101)/(011) crystal facets. The products were found to be photocatalytically active for hydrogen production under UV‐Vis irradiation, with the aid of a 1 wt% Pt surface cocatalyst. The platinized NaNbO₃particles were suspended in an aqueous 20% methanol solution and irradiated by UV‐Vis light (λ > 230 nm). After 6 hours of irradiation, the average total hydrogen production varied with the particle morphologies and sizes, with 753 µmol for Na₂SO₄, 334 µmol for NaF, 290 µmol for NaCl, 81 µmol for NaBr, and 249 µmol for the solid‐state synthesized NaNbO₃. These trends show a clear relationship to particle sizes, with smaller particles showing higher photocatalytic activity in the order of NaF > NaCl > NaBr. Furthermore, the particle morphologies obtained from the Na₂SO₄flux showed even higher photocatalytic activity, though having a relatively similar overall surface area, owing to the higher activity of the (110) crystal facets. The apparent quantum yield (100 mW/cm²,λ = 230 to 350 nm, pH = 7) was measured to be 3.7% for NaNbO₃prepared using the NaF flux, but this was doubled to 6.8% when prepared using the Na₂SO₄flux. Thus, these results demonstrate the powerful utility of flux synthetic techniques to control particle sizes and to expose higher‐activity crystal facets to boost their photocatalytic activities for molecular hydrogen production.

    

   more » « less
5. Multiwalled carbon nanotubes as hard templates to yield advanced geopolymer-based self-assembled nanostructured ceramics

   https://doi.org/10.1016/j.mechrescom.2023.104216  

   Xu, Yunzhi ; Lee, Haklae ; Buettner, Nathanial ; Akono, Ange-Therese ( December 2023 , Mechanics Research Communications)

   Novel multifunctional construction materials are needed to promote resilient infrastructure in the face of climate change and extreme weather. Nanostructured materials such as geopolymer reinforced with carbon-based nanomaterials are a promising way to reach that goal. In recent years, several studies have investigated the influence of nanomaterials on the physical properties of geopolymer composites such as compressive strength and fracture toughness. Yet, a fundamental understanding of the influence of nanomaterials on the nanoscale and micron-scale structure has been elusive so far. Our research objective is to understand how multiwalled carbon nanotubes (MWCNT) can help tailor the microstructure of geopolymers to yield architected multifunctional nanocomposites. We synthesized geopolymer nanocomposites reinforced with 50-nm thick multiwalled carbon nanotubes with mass fractions in the range of 0.1 wt%, 0.2 wt%, and 0.5 wt%. Our major finding is that MWCNTs act as hard templates that promote geopolymer formation via self-assembly. Geopolymer nanoparticle growth is observed along the walls of MWCNTs. A refinement in grain size is observed: increasing the fraction of MWCNTs by 0.5 wt% leads to a reduction in grain size by 54%. Similarly, increasing the mass fraction of MWCNTs leads to a densification of the geopolymer matrix as demonstrated by the Fourier transform infrared spectroscopy results and the statistical deconvolution analysis. Mercury intrusion porosimetry shows a nanoscale tailoring of the pore size distribution: a 26% decrease in porosity is observed as the fraction of MWCNTs is increased to 0.5 wt%. As a result of these nanoscale structural changes, a greater resistance to long-term deformation is observed for MWCNT-reinforced geopolymers, as the creep modulus increases both locally and macroscopically. At the macroscopic level, a 42% increase in the macroscopic logarithmic creep modulus is observed as the fraction of MWCNTs is increased to 0.5 wt%. These findings and the supporting methodology are important to understand how to manipulate matter below 100 nm. This research also paves the way for the design of resilient infrastructure materials with tailored microstructure and mechanical properties. 

   more » « less