skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Surface heights and crevasse morphologies of surging and fast-moving glaciers from ICESat-2 laser altimeter data - Application of the density-dimension algorithm (DDA-ice) and evaluation using airborne altimeter and Planet SkySat data
Award ID(s):
1835256 1942356 1745705
PAR ID:
10211952
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Science of Remote Sensing
Volume:
3
Issue:
C
ISSN:
2666-0172
Page Range / eLocation ID:
100013
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract Sea surface height observations provided by satellite altimetry since 1993 show a rising rate (3.4 mm yr−1) for global mean sea level. While on average, sea level has risen 10 cm over the last 30 years, there is considerable regional variation in the sea level change. Through this work, we predict sea level trends 30 years into the future at a 2° spatial resolution and investigate the future patterns of the sea level change. We show the potential of machine learning (ML) in this challenging application of long-term sea level forecasting over the global ocean. Our approach incorporates sea level data from both altimeter observations and climate model simulations. We develop a supervised learning framework using fully connected neural networks (FCNNs) that can predict the sea level trend based on climate model projections. Alongside this, our method provides uncertainty estimates associated with the ML prediction. We also show the effectiveness of partitioning our spatial dataset and learning a dedicated ML model for each segmented region. We compare two partitioning strategies: one achieved using domain knowledge and the other employing spectral clustering. Our results demonstrate that segmenting the spatial dataset with spectral clustering improves the ML predictions. Significance StatementLong-term projections are needed to help coastal communities adapt to sea level rise. Forecasting multidecadal sea level change is a complex problem. In this paper, we show the promise of machine learning in producing such forecasts 30 years in advance and over the global ocean. Continued improvements in prediction skills that build on this work will be vital in sea level rise adaptation efforts. 
    more » « less
  2. These laser altimetry data were collected as part of the 2023-24 <a href="https://www.coldex.org">NSF COLDEX </a> CXA2 airborne campaign targeting the southern flank of East Antarctica's Dome A. In this Level 2 product, we have used the laser range to the surface and complementary aircraft position data to calculated the ice surface elevation, which is an important constraint on ice flow. Complementary radar, gravity, magnetics and imagery were also collected. <p> <i>Data format:</i>Data are formatted as text files with a header and the following tab delimited format columns. Data are in the same format as similar <a href="https://doi.org/10.5067/JV9DENETK13E"> IceBridge ILUTP2 altimetry data. </a> <p> Field 1: Year (UTC)<br> Field 2: Day of year (UTC)<br> Field 3: Second of day (UTC)<br> Field 4: Longitude Angle (deg) (WGS-84) <br> Field 5: Latitude Angle (deg) (WGS-84)<br> Field 6: Laser Derived Surface Elevation (m) (WGS-84)<br> <p> Missing values have been replaced by "nan". The effective footprint of the laser data is 25 m along track by 1 meter across track. Some cloud filtering was performed. <p> <i>Uncertainties</i>: A comparison of this laser altimetry dataset north of 87.5˚S with the <a href="https://doi.org/10.7910/DVN/EBW8UC"> REMAv2 </a>100 m mosaic digital terrain model indicate a median bias of 17 cm and a root mean squared (RMS) difference of 20 cm. Intersections between profiles within this survey, on the Antarctic Plateau but away from South Pole Station, have RMS differences of 6.8 cm. <p> <i>Datum: </i>WGS-84 ellipsoid; ITRF 2008 <p> <i>Geolocation: </i>Positioning and orientation for CXA1 came from loosely coupled joint PPP/inertial solutions using a Novatel OEM-4 GPS receiver and an iMAR FSAS IMU. <p> <i>Pointing bias: </i> roll: 0.340 degrees; pitch: -0.505 degrees <br> Pointing angle (pointing bias) is the angular offset of the downward-pointing laser boresight respect to the vehicle body frame's vertical (Z) axis. This estimated angle is derived by comparing measurements at crossovers. Pointing angle is provided in the vehicle body frame, using the laser origin for the rotation node. A positive pitch rotation indicates that the laser beam intersects the ground forward of the z-axis. A positive roll rotation indicates that the laser beam intersects the ground left of the z-axis. Pointing biases were found using the minimization of cross over difference method from <a href="http://dx.doi.org/10.3189/2015JoG14J048">Young et al., 2015</a>. <p> <i>Level arm: </i>X: 0 m; Y: 0.2 m; Z: -0.22 m <br> The lever arm is the position of the laser origin relative to the aircraft position solution, estimated using crossover-error minimization. Lever arm is provided in the vehicle body frame, with +X is forward, +Y is right, and +Z is down. Lever arm was measured after installation in the field. <p> <i>GNSS_antenna: </i>AeroAntenna AT1675-17W-TCNF-000-RG-36-NM <br> The coordinate system for the laser-gps lever arm is X forward, Y right, and Z down, from the center of position. 
    more » « less
  3. These laser altimetry data were collected as part of the 2022-23 <a href="https://www.coldex.org">NSF COLDEX </a> CXA1 airborne campaign targeting the southern flank of East Antarctica's Dome A. In this Level 2 product, we have used the laser range to the surface and complementary aircraft position data to calculated the ice surface elevation, which is an important constraint on ice flow. Complementary radar, gravity, magnetics and imagery were also collected. <p> <i>Data format:</i>Data are formatted as text files with a header and the following tab delimited format columns. Data are in the same format as similar <a href="https://doi.org/10.5067/JV9DENETK13E"> IceBridge ILUTP2 altimetry data. </a> <p> Field 1: Year (UTC)<br> Field 2: Day of year (UTC)<br> Field 3: Second of day (UTC)<br> Field 4: Longitude Angle (deg) (WGS-84) <br> Field 5: Latitude Angle (deg) (WGS-84)<br> Field 6: Laser Derived Surface Elevation (m) (WGS-84)<br> <p> Missing values have been replaced by "nan". The effective footprint of the laser data is 25 m along track by 1 meter across track. Some cloud filtering was performed. <p> <i>Uncertainties</i>: A comparison of this laser altimetry dataset north of 87.5˚S with the <a href="https://doi.org/10.7910/DVN/EBW8UC"> REMAv2 </a>100 m mosaic digital terrain model indicate a median bias of 17 cm and a root mean squared (RMS) difference of 20 cm. Intersections between profiles within this survey, on the Antarctic Plateau but away from South Pole Station, have RMS differences of 6.4 cm. <p> <i>Datum: </i>WGS-84 ellipsoid; ITRF 2008 <p> <i>Geolocation: </i>Positioning and orientation for CXA1 came from loosely coupled joint PPP/inertial solutions using a Novatel OEM-4 GPS receiver and an iMAR FSAS IMU. <p> <i>Pointing bias: </i> roll: -0.2 degrees; pitch: -0.350 degrees <br> Pointing angle (pointing bias) is the angular offset of the downward-pointing laser boresight respect to the vehicle body frame's vertical (Z) axis. This estimated angle is derived by comparing measurements at crossovers. Pointing angle is provided in the vehicle body frame, using the laser origin for the rotation node. A positive pitch rotation indicates that the laser beam intersects the ground forward of the z-axis. A positive roll rotation indicates that the laser beam intersects the ground left of the z-axis. Pointing biases were found using the minimization of cross over difference method from <a href="http://dx.doi.org/10.3189/2015JoG14J048">Young et al., 2015</a>. <p> <i>Level arm: </i>X: 0 m; Y: 0.2 m; Z: -0.22 m <br> The lever arm is the position of the laser origin relative to the aircraft position solution, estimated using crossover-error minimization. Lever arm is provided in the vehicle body frame, with +X is forward, +Y is right, and +Z is down. Lever arm was measured after installation in the field. <p> <i>GNSS_antenna: </i>AeroAntenna AT1675-17W-TCNF-000-RG-36-NM <br> The coordinate system for the laser-gps lever arm is X forward, Y right, and Z down, from the center of position. 
    more » « less