skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Effects of peracetic acid on aromatic polyamide nanofiltration membranes: a comparative study with chlorine
Peracetic acid (PAA) is being considered as a disinfectant in membrane-based wastewater reuse systems, but its compatibility with polyamide membranes has not been thoroughly investigated. In this work, we showed that PAA induced much less change in the performance and material characteristics of NF90 membranes than the traditional disinfectant free chlorine (NaOCl). The change in membrane water flux and the rejection of salt and neutral organic compounds after PAA exposure (1–180 g h L −1 ) is significantly less than that resulting from NaOCl exposure at levels as low as 1 g h L −1 . The presence of two wastewater constituents, chloride or Fe( ii ), did not significantly impact membrane performance upon exposure to PAA. Surface characterization showed that oxygen was incorporated into polyamide by PAA, some of which was attributed to the formation of carboxylic acid groups. Experiments using a model aromatic amide, benzanilide, indicated an unexpected role of PAA in protecting the membrane from radicals formed by Fe( ii ) and the H 2 O 2 present in commercial PAA formulations. Furthermore, product identification suggests that both amide bond breakage and ring oxidation are possible reaction mechanisms for PAA. Our findings support that PAA is a viable disinfectant candidate for wastewater reuse and warrants further evaluation.  more » « less
Award ID(s):
1652412
PAR ID:
10221033
Author(s) / Creator(s):
; ; ; ; ; ;
Date Published:
Journal Name:
Environmental Science: Water Research & Technology
Volume:
7
Issue:
2
ISSN:
2053-1400
Page Range / eLocation ID:
306 to 320
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Peracetic acid (PAA) is a sanitizer with increasing use in food, medical and water treatment industries. Amino acids are important components in targeted foods for PAA treatment and ubiquitous in natural waterbodies and wastewater effluents as the primary form of dissolved organic nitrogen. To better understand the possible reactions, this work investigated the reaction kinetics and transformation pathways of selected amino acids towards PAA. Experimental results demonstrated that most amino acids showed sluggish reactivity to PAA except cysteine (CYS), methionine (MET), and histidine (HIS). CYS showed the highest reactivity with a very rapid reaction rate. Reactions of MET and HIS with PAA followed second-order kinetics with rate constants of 4.6 ± 0.2, and 1.8 ± 0.1 M−1s−1 at pH 7, respectively. The reactions were faster at pH 5 and 7 than at pH 9 due to PAA speciation. Low concentrations of H2O2 coexistent with PAA contributed little to the oxidation of amino acids. The primary oxidation products of amino acids with PAA were [O] addition compounds on the reactive sites at thiol, thioether and imidazole groups. Theoretical calculations were applied to predict the reactivity and regioselectivity of PAA electrophilic attacks on amino acids and improved mechanistic understanding. As an oxidative disinfectant, the reaction of PAA with organics to form byproducts is inevitable; however, this study shows that PAA exhibits lower and more selective reactivity towards biomolecules such as amino acids than other common disinfectants, causing less concern of toxic disinfection byproducts. This attribute may allow greater stability and more targeted actions of PAA in various applications. 
    more » « less
  2. Peracetic acid (PAA) is a widely used disinfectant, and combined UV light with PAA (i.e. UV/PAA) can be a novel advanced oxidation process for elimination of water contaminants. This study is among the first to evaluate the photolysis of PAA under UV irradiation (254 nm) and degradation of pharmaceuticals by UV/PAA. PAA exhibited high quantum yields (Φ254nm = 1.20 and 2.09 mol·Einstein−1 for the neutral (PAA0) and anionic (PAA-) species, respectively) and also showed scavenging effects on hydroxyl radicals (k•OH/PAA0 = (9.33±0.3)×108 M−1·s−1 and k•OH/PAA- = (9.97±2.3)×109 M−1·s−1). The pharmaceuticals were persistent with PAA alone but degraded rapidly by UV/PAA. The contributions of direct photolysis, hydroxyl radicals, and other radicals to pharmaceutical degradation under UV/PAA were systematically evaluated. Results revealed that •OH was the primary radical responsible for the degradation of carbamazepine and ibuprofen by UV/PAA, whereas CH3C(=O)O• and/or CH3C(=O)O2• contributed significantly to the degradation of naproxen and 2-naphthoxyacetic acid by UV/PAA in addition to •OH. The carbon-centered radicals generated from UV/PAA showed strong reactivity to oxidize certain naphthyl compounds. The new knowledge obtained in this study will facilitate further research and development of UV/PAA as a new degradation strategy for water contaminants. 
    more » « less
  3. null (Ed.)
    In the textile industry, a high-efficiency dye removal and low-retention of salt is demanded for recycling wastewater. In this study, polyvinylidene fluoride (PVDF) ultrafiltration membrane was transformed to a negatively charged loose nanofiltration (NF) membrane through UV-grafting of acrylic acid. At the optimal exposure of PVDF membrane in UV light for 5 min, the membrane had a high dye recovery above 99% (Congo red and Eriochrome® Black T) and a low sodium chloride (NaCl) rejection of less than 15% along with pure water flux of 26 L∙m−2∙h−1∙bar−1. Its antifouling and oleophobicity surface properties were verified using fluorescent- bovine serum albumin (BSA) and underwater mineral oil contact angle, respectively. According to the fluorescent microscopic images, the modified membrane had ten times lower adhesion of protein on the surface than the unmodified membrane. The underwater oil contact angle was raised from 110° to 155°. Moreover, the salt rejection followed this sequence: Na2SO4 > MgSO4 > NaCl > MgCl2, which agreed with the typical negatively charged NF membrane. In addition, the physicochemical characterization of membranes was further investigated to understand and link to the membrane performance, such as surface functional group, surface elements analysis, surface roughness/morphology, and surface hydrophilicity. 
    more » « less
  4. Chen, X (Ed.)
    Removal of per- and polyfluoroalkyl substances (PFAS) from water has become a research topic of interest in recent times. However, it is very challenging to remove short-chain ( 
    more » « less
  5. The widespread production and use of multi-fluorinated carbon-based substances for a variety of purposes has contributed to the contamination of the global water supply in recent decades. Conventional wastewater treatment can reduce contaminants to acceptable levels, but the concentrated retentate stream is still a burden to the environment. A selective anion-exchange membrane capable of capture and controlled release could further concentrate necessary contaminants, making their eventual degradation or long-term storage easier. To this end, commercial microfiltration membranes were modified using pore functionalization to incorporate an anion-exchange moiety within the membrane matrix. This functionalization was performed with primary and quaternary amine-containing polymer networks ranging from weak to strong basic residues. Membrane loading ranged from 0.22 to 0.85 mmol/g membrane and 0.97 to 3.4 mmol/g membrane for quaternary and primary functionalization, respectively. Modified membranes exhibited a range of water permeances within approximately 45–131 LMH/bar. The removal of PFASs from aqueous streams was analyzed for both “long-chain” and “short-chain” analytes, perfluorooctanoic acid and perfluorobutyric acid, respectively. Synthesized membranes demonstrated as high as 90% rejection of perfluorooctanoic acid and 50–80% rejection of perfluorobutyric acid after 30% permeate recovery. Regenerated membranes maintained the capture performance for three cycles of continuous operation. The efficiency of capture and reuse can be improved through the consideration of charge density, water flux, and influent contaminant concentration. This process is not limited by the substrate and, thus, is able to be implemented on other platforms. This research advances a versatile membrane platform for environmentally relevant applications that seek to help increase the global availability of safe drinking water. 
    more » « less