An official website of the United States government
The live visualization with fast kinetics of the interaction between cells has been long term challenges because of the lack of efficient stimulation methods. We propose an approach to achieve single cell resolution stimulation and FRET-base calcium live cell imaging to visualize fast kinetics of calcium transport between physically connect neighboring cells. Chemical stimulation stimulates cells within a dish at the same time and is not suitable for the study of cell-cell interaction. We replaced chemical stimulation with ultrasound-based mechanical stimulation approach to provide precise spatiotemporal resolution. To achieve this, we integrated 3D translation stages and epi-fluorescence microscope and a developed 150 MHz high frequency ultrasound with f number of 1 and aperture size of 1 mm. The 150 MHz transducer can focus within 10 micrometers in diameter and directly stimulate cells by disturbing cell plasma membranes without microbubbles. High frequency stimulation was used to introduce calcium ions into cytoplasm of cells. Results demonstrate calcium transport between cells, visualized by FRET calcium biosensor after only one cell was stimulated by the developed high frequency ultrasonic transducer.
more »
« less
FRET-Based Ca2+ Biosensor Single Cell Imaging Interrogated by High-Frequency Ultrasound
Fluorescence resonance energy transfer (FRET)-based biosensors have advanced live cell imaging by dynamically visualizing molecular events with high temporal resolution. FRET-based biosensors with spectrally distinct fluorophore pairs provide clear contrast between cells during dual FRET live cell imaging. Here, we have developed a new FRET-based Ca2+ biosensor using EGFP and FusionRed fluorophores (FRET-GFPRed). Using different filter settings, the developed biosensor can be differentiated from a typical FRET-based Ca2+ biosensor with ECFP and YPet (YC3.6 FRET Ca2+ biosensor, FRET-CFPYPet). A high-frequency ultrasound (HFU) with a carrier frequency of 150 MHz can target a subcellular region due to its tight focus smaller than 10 µm. Therefore, HFU offers a new single cell stimulations approach for FRET live cell imaging with precise spatial resolution and repeated stimulation for longitudinal studies. Furthermore, the single cell level intracellular delivery of a desired FRET-based biosensor into target cells using HFU enables us to perform dual FRET imaging of a cell pair. We show that a cell pair is defined by sequential intracellular delivery of the developed FRET-GFPRed and FRET-CFPYPet into two target cells using HFU. We demonstrate that a FRET-GFPRed exhibits consistent 10–15% FRET response under typical ionomycin stimulation as well as under a new stimulation strategy with HFU.
more »
« less
- Award ID(s):
- 1943852
- PAR ID:
- 10222029
- Date Published:
- Journal Name:
- Sensors
- Volume:
- 20
- Issue:
- 17
- ISSN:
- 1424-8220
- Page Range / eLocation ID:
- 4998
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Ratiometric indicators with long emission wavelengths are highly preferred in modern bioimaging and life sciences. Herein, we elucidated the working mechanism of a standalone red fluorescent protein (FP)-based Ca2+ biosensor, REX-GECO1, using a series of spectroscopic and computational methods. Upon 480 nm photoexcitation, the Ca2+-free biosensor chromophore becomes trapped in an excited dark state. Binding with Ca2+ switches the route to ultrafast excited-state proton transfer through a short hydrogen bond to an adjacent Glu80 residue, which is key for the biosensor’s functionality. Inspired by the 2D-fluorescence map, REX-GECO1 for Ca2+ imaging in the ionomycin-treated human HeLa cells was achieved for the first time with a red/green emission ratio change (ΔR/R0) of ~300%, outperforming many FRET- and single FP-based indicators. These spectroscopy-driven discoveries enable targeted design for the next-generation biosensors with larger dynamic range and longer emission wavelengths.more » « less
-
Bloom, Kerry (Ed.)Fluorescent biosensors are a valuable means to report the spatiotemporal dynamics of protein activities in live cells and animals. However, biosensors affect the activities they are reporting. This can be ameliorated by increasing sensitivity, to use lower biosensor concentrations, or by choosing designs that minimize undesirable interactions. For biosensors in which fluorescent components interact to produce Forster Resonance Energy Transfer (FRET), perturbation is often due to interaction of biosensor components with nonfluorescent, endogenous proteins, rather than productive interactions that lead to FRET. Here we engineer the interface between biosensor components using charge swap and ‘knob into hole’ mutations to reduce all but desired interactions. Novel biosensors for Rac1 and Cdc42 showed reduced interactions with endogenous GTPases and effectors, normal activation by guanine nucleotide exchange factors (GEFs), and correctly reproduced previous reports of GTPase activation dynamics. Assaying concentration-dependent effects on cell motility showed substantially reduced perturbation of normal cell behavior. Computational models indicated that minimal perturbation could be achieved over a broader range of concentrations using the new ‘orthogonal’ biosensors.more » « less
-
Introduction— In response to external stress, cells alter their morphology, metabolic activity, and functions to mechanically adapt to the dynamic, local environment through cell allostasis. To explore mechanotransduction in cellular allostasis, we applied an integrated micromechanical system that combines an ‘ultrasound tweezers’-based mechanical stressor and a Förster resonance energy transfer (FRET)-based molecular force biosensor, termed “actinin-sstFRET,” to monitor in situ single-cell allostasis in response to transient stimulation in real time. Methods— The ultrasound tweezers utilize 1 Hz, 10-second transient ultrasound pulses to acoustically excite a lipid-encapsulated microbubble, which is bound to the cell membrane, and apply a pico- to nano-Newton range of forces to cells through an RGD-integrin linkage. The actinin-sstFRET molecular sensor, which engages the actin stress fibers in live cells, is used to map real-time actomyosin force dynamics over time. Then, the mechanosensitive behaviors were examined by profiling the dynamics in Ca2+ influx, actomyosin cytoskeleton (CSK) activity, and GTPase RhoA signaling to define a single-cell mechanical allostasis. Results—By subjecting a 1 Hz, 10-second physical stress, single vascular smooth muscle cells (VSMCs) were observed to remodeled themselves in a biphasic mechanical allostatic manner within 30 minutes that caused them to adjust their contractility and actomyosin activities. The cellular machinery that underscores the vital role of CSK equilibrium in cellular mechanical allostasis, includes Ca2+ influx, remodeling of actomyosin CSK and contraction, and GTPase RhoA signaling. Mechanical allostasis was observed to be compromised in VSMCs from patients with type II diabetes mellitus (T2DM), which could potentiate an allostatic maladaptation. Conclusions— By integrating tools that simultaneously permit localized mechanical perturbation and map actomyosin forces, we revealed distinct cellular mechanical allostasis profiles in our micromechanical system. Our findings of cell mechanical allostasis and maladaptation provide the potential for mechanophenotyping cells to reveal their pathogenic contexts and their biophysical mediators that underlie multi-etiological diseases such as diabetes, hypertension, or aging.more » « less
-
Double-stranded (ds) biosensors are homogeneous oligonucleotide probes for detection of nucleic acid sequences in biochemical assays and live cell imaging. Locked nucleic acid (LNA) modification can be incorporated in the biosensors to enhance the binding affinity, specificity, and resistance to nuclease degradation. However, LNA monomers in the quencher sequence can also prevent the target-fluorophore probe binding, which reduces the signal of the dsLNA biosensor. This study investigates the influence of LNA modification on dsLNA biosensors by altering the position and amount of LNA monomers present in the quencher sequence. We characterize the fluorophore–quencher interaction, target detection, and specificity of the biosensor in free solution and evaluate the performance of the dsLNA biosensor in 2D monolayers and 3D spheroids. The data indicate that a large amount of LNA monomers in the quencher sequence can enhance the specificity of the biosensor, but prevents effective target binding. Together, our results provide guidelines for improving the performance of dsLNA biosensors in nucleic acid detection and gene expression analysis in live cells.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.3390/s20174998
