An official website of the United States government
Abstract BackgroundStalk lodging (the premature breaking of plant stalks or stems prior to harvest) is a persistent agricultural problem that causes billions of dollars in lost yield every year. Three-point bending tests, and rind puncture tests are common biomechanical measurements utilized to investigate crops susceptibility to lodging. However, the effect of testing rate on these biomechanical measurements is not well understood. In general, biological specimens (including plant stems) are well known to exhibit viscoelastic mechanical properties, thus their mechanical response is dependent upon the rate at which they are deflected. However, there is very little information in the literature regarding the effect of testing rate (aka displacement rate) on flexural stiffness, bending strength and rind puncture measurements of plant stems. ResultsFully mature and senesced maize stems and wheat stems were tested in three-point bending at various rates. Maize stems were also subjected to rind penetration tests at various rates. Testing rate had a small effect on flexural stiffness and bending strength calculations obtained from three-point bending tests. Rind puncture measurements exhibited strong rate dependent effects. As puncture rate increased, puncture force decreased. This was unexpected as viscoelastic materials typically show an increase in resistive force when rate is increased. ConclusionsTesting rate influenced three-point bending test results and rind puncture measurements of fully mature and dry plant stems. In green stems these effects are expected to be even larger. When conducting biomechanical tests of plant stems it is important to utilize consistent span lengths and displacement rates within a study. Ideally samples should be tested at a rate similar to what they would experience in-vivo.
more »
« less
A novel rind puncture technique to measure rind thickness and diameter in plant stalks
Abstract Background Measurements of rind and culm thickness and stem radius/diameter are important to biomechanical, ecological and physiological plant studies. However, many methods of measuring rind thickness and diameter are labor intensive and induce plant fatality. A novel rind puncture methodology for obtaining measurements of rind thickness and diameter has been developed. The suitability of the new method for implementation in plant studies is presented. Results The novel rind puncture technique was used to obtain measurements of rind thickness and diameter for samples of Poison Hemlock ( Conium maculatum ). The rind puncture measurements were strongly correlated with caliper measurements (R 2 > 0.97) and photographic image analysis measurements (R 2 > 0.84). The capacity for high throughput measurements using the rind puncture technique was determined to exceed that of caliper measurements and image analysis techniques. Conclusions The rind puncture technique shows promise as a high throughput method for determining rind thickness and diameter as it is cost effective and non-lethal. The authors are currently working to develop a custom handheld apparatus to allow the novel rind puncture method to be used in field work. High throughput field-based measurements of rind thickness and diameter are needed to help address the problem of stalk lodging (failure of grain crops to remain upright until harvest).
more »
« less
- Award ID(s):
- 1826715
- PAR ID:
- 10227433
- Date Published:
- Journal Name:
- Plant Methods
- Volume:
- 16
- Issue:
- 1
- ISSN:
- 1746-4811
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Background Modern computational modeling could provide the key to obtaining new insights into the mechanisms of maize stalk failure as well as suggesting new ways to improve stalk strength. However, a complete set of mechanical properties of maize tissues is required to enable computational modeling of maize stems. This study developed two compression test methods for obtaining the longitudinal modulus of elasticity of both rind and pith tissues, assessed the influence of water content on tissue properties, and investigated the relationship between rind modulus and pith modulus. These methods involved uniform 5–7 cm segments of maize stems which were scanned using a flatbed scanner then tested in compression using a universal testing machine in both intact and dissected (rind-only and pith-only) states. Results The modulus of elasticity of pith tissues was highest for fully turgid specimens and decreased as water was removed from the specimens. Water content was negatively correlated with the modulus of elasticity of the rind. Rind and pith tissues were found to be weakly correlated. The median ratio of rind modulus to pith modulus was found to be 17. Of the two methods investigated, the pith-only specimen preparation was found to be simple reliable while the rind-only method was found to be adversely affected by lateral bowing of the specimen. Conclusions Researchers can use the information in this paper to improve computational models of maize stems in three ways: (1) by incorporating realistic values of the longitudinal modulus of elasticity of pith and rind tissues; (2) by selecting pith and rind properties that match empirically observed ratios; and (3) by incorporating appropriate dependencies between these material properties and water content. From an experimental perspective, the intact/pith-only experimental method outlined in this paper is simpler than previously reported methods and provides reliable estimates of both pith and rind modulus of elasticity values. Further research using this measurement method is recommended to more clearly understand the influence of water content and turgor pressure on tissue properties.more » « less
-
Most studies of bacterial motility have examined small-scale (micrometer–centimeter) cell dispersal in monocultures. However, bacteria live in multispecies communities, where interactions with other microbes may inhibit or facilitate dispersal. Here, we demonstrate that motile bacteria in cheese rind microbiomes use physical networks created by filamentous fungi for dispersal, and that these interactions can shape microbial community structure. Serratia proteamaculans and other motile cheese rind bacteria disperse on fungal networks by swimming in the liquid layers formed on fungal hyphae. RNA-sequencing, transposon mutagenesis, and comparative genomics identify potential genetic mechanisms, including flagella-mediated motility, that control bacterial dispersal on hyphae. By manipulating fungal networks in experimental communities, we demonstrate that fungal-mediated bacterial dispersal can shift cheese rind microbiome composition by promoting the growth of motile over non-motile community members. Our single-cell to whole-community systems approach highlights the interactive dynamics of bacterial motility in multispecies microbiomes.more » « less
-
Stalk lodging, or failure of the stalk structure, is a serious problem in the production of maize (corn). Addressing this problem requires an understanding of the parameters that influence lodging resistance. Computational modelling is a powerful tool for this purpose, but current modelling methods have limited throughput and do not provide the ability to modify individual geometric features. A parameterised model of the maize stalk has the potential to overcome these limitations. The purposes of this study were to (a) develop a parameterised model of the maize stalk cross-section that could accurately simulate the physical response of multiple loading cases, and (b) use this model to rigorously investigate the relationships between cross-sectional morphology and predictive model accuracy. Principal component analysis was utilised to reveal underlying geometric patterns which were used as parameters in a cross-sectional model. A series of approximated cross-sections was created that represented various levels of geometric fidelity. The true and approximated cross-sections were modelled in axial tension/compression, bending, transverse compression, and torsion. For each loading case, the predictive accuracy of each approximated model was calculated. A sensitivity study was also performed to quantify the influence of individual parameters. The simplest model, an elliptical cross-section consisting of just three parameters: major diameter, minor diameter, and rind thickness, accurately predicted the structural stiffness of all four loading cases. The modelling approach used in this study model can be used to parameterise the maize cross-section to any desired level of geometric fidelity, and could be applied to other plant species.more » « less
-
The acquisition of quantitative information on plant development across a range of temporal and spatial scales is essential to understand the mechanisms of plant growth. Recent years have shown the emergence of imaging methodologies that enable the capture and analysis of plant growth, from the dynamics of molecules within cells to the measurement of morphometricand physiological traits in field-grown plants. In some instances, these imaging methods can be parallelized across multiple samples to increase throughput. When high throughput is combined with high temporal and spatial resolution, the resulting image-derived data sets could be combined with molecular large-scale data sets to enable unprecedented systems-level computational modeling. Such image-driven functional genomics studies may be expected to appear at an accelerating rate in the near future given the early success of the foundational efforts reviewed here. We present new imaging modalities and review how they have enabled a better understanding of plant growth from the microscopic to the macroscopic scale.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1186/s13007-020-00587-4
