Dye-doped nanoparticles have been investigated as bright, luminescent labels for super-resolution microscopy via localization methods. One key factor in super-resolution is the size of the luminescent label, which in some cases results in a frame shift between the label target and the label itself. Ag@SiO 2 core–shell nanoparticles, doped with organic fluorophores, have shown promise as super-resolution labels. One key aspect of these nanoparticles is that they blink under certain conditions, allowing super-resolution localization with a single excitation source in aqueous solution. In this work, we investigated the effects of both the Ag core and the silica (SiO 2 ) shell on the self-blinking properties of these nanoparticles. Both core size and shell thickness were manipulated by altering the reaction time to determine core and shell effects on photoblinking. Size and shell thickness were investigated individually under both dry and hydrated conditions and were then doped with a 1 mM solution of Rhodamine 110 for analysis. We observed that the cores themselves are weakly luminescent and are responsible for the blinking observed in the fully-synthesized metal-enhanced fluorescence nanoparticles. There was no statistically significant difference in photoblinking behavior—both intensity and duty cycle—with decreasing core size. This observation was used to synthesize smaller nanoparticles ranging from approximately 93 nm to 110 nm as measured using dynamic light scattering. The blinking particles were localized via super-resolution microscopy and show single particle self-blinking behavior. As the core size did not impact blinking performance or intensity, the nanoparticles can instead be tuned for optimal size without sacrificing luminescence properties.
more »
« less
Sequential intraparticle Förster resonance energy transfer for multi-wavelength bioimaging
Core/shell nanoparticles composed of a silica core over which a propargyl methacrylate (PMA) shell was polymerized around were synthesized. To employ the shell coating, the surface of the silica nanoparticles (SiNPs) was modified with an alkene-terminated organometallic silane linker that allowed for the covalent attachment of a poly(propargyl methacrylate) (pPMA) shell. The alkyne groups resulting from the pPMA shell were utilized in copper(I)-catalyzed azide/alkyne cycloaddition (CuAAC) reactions to attach azide-modified Förster resonance energy transfer (FRET) pairs of naphthalimide (azNap), rhodamine B (azRhod), and silicon phthalocyanine (azSiPc) derivatives to the shell surface. The luminescence of the system was manipulated by the covalent attachment of one, two, or three of the fluorophores resulting in no energy transfer, one energy transfer, or two energy transfers, respectively. When all three fluorophores were attached to the core/shell particles, an excitation of azNap with a wavelength of 400 nm resulted in the sequential energy transfer between two FRET pairs and the sole emission of azSiPc at 670 nm. These particles may have applications as bioimaging probes as their luminescence is easily detected using fluorescence microscopy.
more » « less- Award ID(s):
- 1632881
- NSF-PAR ID:
- 10229087
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Optical Materials Express
- Volume:
- 11
- Issue:
- 6
- ISSN:
- 2159-3930
- Page Range / eLocation ID:
- Article No. 1742
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Abstract In the present study, a water‐soluble hyperbranched polymer platform that contained a Förster resonance energy transfer (FRET) array and exhibited varied fluorescence in response to solvent, light, and CN−anion stimuli was constructed. The use of chain‐growth copper‐catalyzed azide–alkyne cycloaddition polymerization (CuAACP) enabled accurate control of the ratio and distance of three incorporated fluorophores, coumarin (Cou), nitrobenzoxadiazole (NBD), and photoswitchable spiropyran (SP), that could be reversibly transformed into the red‐emitting merocyanine (MC) state. Within the FRET system, the energy flow from Cou to MC was significantly enhanced by the introduction of NBD as a central fluorophore relay. Moreover, the energy‐transfer efficiency was increased by changing the solvent from tetrahydrofuran to more polar water; this was accompanied by a clear color change and fluorescence behavior. These correlations of polymer composition and solvent polarity to the FRET efficiency were finally applied to the effective detection of CN−anion; thus demonstrating a function of this polymer as a CN−sensor.
-
null (Ed.)Fluorescent tagging is a popular method in biomedical research. Using multiple taggants of different but resolvable fluorescent spectra simultaneously (multiplexing), it is possible to obtain more comprehensive and faster information about various biochemical reactions and diseases, for example, in the method of flow cytometry. Here we report on a first demonstration of the synthesis of ultrabright fluorescent silica nanoporous nanoparticles (Star-dots), which have a large number of complex fluorescence spectra suitable for multiplexed applications. The spectra are obtained via simple physical mixing of different commercially available fluorescent dyes in a synthesizing bath. The resulting particles contain dye molecules encapsulated inside of cylindrical nanochannels of the silica matrix. The distance between the dye molecules is sufficiently small to attain Forster resonance energy transfer (FRET) coupling within a portion of the encapsulated dye molecules. As a result, one can have particles of multiple spectra that can be excited with just one wavelength. We show this for the mixing of five, three, and two dyes. Furthermore, the dyes can be mixed inside of particles in different proportions. This brings another dimension in the complexity of the obtained spectra and makes the number of different resolvable spectra practically unlimited. We demonstrate that the spectra obtained by different mixing of just two dyes inside of each particle can be easily distinguished by using a linear decomposition method. As a practical example, the errors of demultiplexing are measured when sets of a hundred particles are used for tagging.more » « less
-
more » « less
Abstract X‐ray radiation exhibits diminished scattering and a greater penetration depth in tissue relative to the visible spectrum and has spawned new medical imaging techniques that exploit X‐ray luminescence of nanoparticles. The majority of the nanoparticles finding applications in this field incorporate metals with high atomic numbers and pose potential toxicity effects. Here, a general strategy for the preparation of a fully organic X‐ray radioluminescent colloidal platform that can be tailored to emit anywhere in the visible spectrum through a judicious choice in donor/acceptor pairing and multiple sequential Förster resonance energy transfers (FRETs) is presented. This is demonstrated with three different types of ≈100 nm particles that are doped with anthracene as the scintillating molecule to “pump” subsequent FRET dye pairs that result in emissions from ≈400 nm out past 700 nm. The particles can be self‐assembled in crystalline colloidal arrays, and the radioluminescence of the particles can be dynamically tuned by coupling the observed rejection wavelength with the dyes' emission.
-
more » « less
Abstract Hairy nanoparticles (HNPs) constitute a class of hybrid nanocomposites that are resistant to aggregation and agglomeration, although the green, large‐scale synthesis of HNPs remains a challenge. In this work, 25 nm‐diameter silica‐core HNPs with a poly(methyl methacrylate) (PMMA) shell were synthesized using a graft‐from approach in aqueous miniemulsion, employing atom transfer radical polymerization with activators regenerated by electron transfer (ARGET‐ATRP). In particular, this work used tetrabutylammonium bromide (TBAB)‐assisted phase transfer of monomer, markedly improving upon earlier methods by showing that phase transfer could take place in the absence of organic solvents. Furthermore, syntheses with selected monomer addition rates produced HNP graft densities ranging from 0.011 to 0.017 chains/nm2and shell thicknesses ranging from 2.5 to 11 nm. Finally, analysis of reaction kinetics revealed that shell growth reached completion in as little as 2 hr, confirmed by the synthesis of >1 g of PMMA‐shell HNPs in a reduced timeframe.
