skip to main content

Explore Research Products in the NSF-PAR

Title: Extracting multiple bridge frequencies from test vehicle –a theoretical study
The coupled differential equation group for the vehicle bridge interaction system is reestablished to include both the vehicle and bridge damping effects. The equation group can be uncoupled and closed-form solutions for both the bridge and vehicle can be obtained under the assumption that the vehicle acceleration magnitude is much lower than the gravitational acceleration constant. Then based on a simply supported boundary condition scenario, several critical parameters including bridge damping, vehicle frequency, vehicle speed, vehicle mass, and vehicle damping are studied to investigate their effects on extracting multiple bridge frequencies from the vehicle. The results show that the bridge damping plays a significant role in the vibration behaviour of both the vehicle and the bridge compared to the vehicle damping. The vehicle is preferred to be designed with a high frequency beyond the interested bridge frequencies to be extracted since low vehicle frequency tends to attenuate bridge frequencies that are higher than the vehicle frequency. A camel hump phenomenon can be observed on the extracted bridge frequencies from the vehicle, especially for scenarios that involve high bridge vibration mode and high vehicle speed. Vehicle speed is preferred to be maintained low to meet the theoretical assumption and to reduce the camel hump phenomenon. Although vehicle mass is not necessarily limited in this study, there is a magnitude balance among vehicle mass, vehicle speed, and damping to meet the theoretical assumption. This theoretical work may give some indications for designing a special field test vehicle to monitor bridge in a more comprehensive way.  more » « less
Award ID(s):
1645863
NSF-PAR ID:
10229449
Author(s) / Creator(s):
Date Published:
Journal Name:
Journal of sound and vibration
Volume:
490
ISSN:
0022-460X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ( , Engineering structures)
    null (Ed.)
    Theoretical vehicle bridge interaction (VBI) models have been widely studied for decades for the simply supported boundary condition but not for the other boundary conditions. This paper presents the mathematical models for several non-simply supported boundary conditions including both ends fixed, fixed simply supported, and one end fixed the other end free (cantilever) boundary condition. The closed-form solutions can be found under the assumption that the vehicle acceleration magnitude is far lower than the gravitational acceleration constant. The analytical solutions are then illustrated on a specific bridge example to compare the responses due to different bridge boundary conditions, and to study different vehicle parameter effects on extracting multiple bridge frequencies (five) from the vehicle responses. A signal drift phenomenon can be observed on the acceleration response of both the bridge and the vehicle, while a camel hump phenomenon can be observed on the Fast Fourier analysis of the vehicle acceleration signal. The parameter study shows that the vehicle frequency is preferred to be high due to the attenuation effect on the bridge frequencies that are higher than the vehicle frequency. The vehicle speed parameter is preferred to be low to reduce both the camel hump phenomenon and the vehicle acceleration magnitude, while both the vehicle mass and damping parameter have little effect on the multiple bridge frequencies extraction from the vehicle. Besides presenting the explicit solutions for calibrating other numerical models, this study also demonstrates the feasibility of the vehicle-based bridge health monitoring approach, as any bridge anomaly due to deterioration may be sensitively reflected on the bridge frequency list extracted from the vehicle response. 
    more » « less
  2. ; ; ( , IEEE Transactions on Intelligent Transportation Systems)
    This research explores the inherent vulnerability of nonlinear vehicle platoons characterized by the oscillatory behavior triggered by external perturbations. The perturbation exerted on the vehicle platoon is regarded as an external force on an object. Following the mechanical vibration analysis in mechanics, this research proposes a vibration-theoretic approach that advances our understanding of platoon vulnerability from two aspects. First, the proposed approach introduces damping intensity to characterize vehicular platoon vulnerability, which divides platoon oscillations into two types, i.e., underdamped and overdamped. The damping intensity measures the platoon’s recovery strength in responding to perturbations. Second, the proposed approach can obtain the resonance frequency of a nonlinear vehicle platoon, where resonance amplifies platoon oscillation magnitude when the external perturbation frequency equals the platoon’s damping oscillation frequency. The main contribution of this research lies in the analytical derivation of the closed-form formulas of damping intensity and resonance frequency. In particular, the proposed approach formulates platoon dynamics under perturbation as a second-order non-homogeneous ordinary differential equation, enabling rigorous derivations and analyses for platoons with complicated nonlinear car-following behaviors. Through simulations built on real-world data, this paper demonstrates that an overdamped vehicle platoon is more robust against perturbations, and an underdamped platoon can be destabilized easily by exerting a perturbation at the platoon’s resonance frequency. The theoretical derivations and simulation results shed light on the design of reliable platooning control, either for human-driven or automated vehicles, to suppress the adverse effects of oscillations. 
    more » « less
  3. ; ; ( , Sensors)
    Recently, drive-by bridge inspection has attracted increasing attention in the bridge monitoring field. A number of studies have given confidence in the feasibility of the approach to detect, quantify, and localize damages. However, the speed of the inspection truck represents a major obstacle to the success of this method. High speeds are essential to induce a significant amount of kinetic energy to stimulate the bridge modes of vibration. On the other hand, low speeds are necessary to collect more data and to attenuate the vibration of the vehicle due to the roughness of the road and, hence, magnify the bridge influence on the vehicle responses. This article introduces Frequency Independent Underdamped Pinning Stochastic Resonance (FI-UPSR) as a new technique, which possesses the ability to extract bridge dynamic properties from the responses of a vehicle that passes over the bridge at high speed. Stochastic Resonance (SR) is a phenomenon where feeble information such as weak signals can be amplified through the assistance of background noise. In this study, bridge vibrations that are present in the vehicle responses when it passes over the bridge are the feeble information while the noise counts for the effect of the road roughness on the vehicle vibration. UPSR is one of the SR models that has been chosen in this study for its suitability to extract the bridge vibration. The main contributions of this article are: (1) introducing a Frequency Independent-Stochastic Resonance model known as the FI-UPSR and (2) implementing this model to extract the bridge vibration from the responses of a fast passing vehicle. 
    more » « less
  4. ; ; ; ( , Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition)
    This work is centered on high-fidelity modeling, analysis, and rigorous experiments of vibrations and guided (Lamb) waves in a human skull in two connected tracks: (1) layered modeling of the cranial bone structure (with cortical tables and diploë) and its vibration-based elastic parameter identification (and validation); (2) transcranial leaky Lamb wave characterization experiments and radiation analyses using the identified elastic parameters in a layered semi analytical finite element framework, followed by time transient simulations that consider the inner porosity as is. In the first track, non-contact vibration experiments are conducted to extract the first handful of modal frequencies in the auditory frequency regime, along with the associated damping ratios and mode shapes, of dry cranial bone segments extracted from the parietal and frontal regions of a human skull. Numerical models of the bone segments are built with a novel image reconstruction scheme that employs microcomputed tomographic scans to build a layered bone geometry with separate homogenized domains for the cortical tables and the diploë. These numerical models and the experimental modal frequencies are then used in an iterative parameter identification scheme that yields the cortical and diploic isotropic elastic moduli of each domain, whereas the corresponding densities are estimated using the total experimental mass and layer mass ratios obtained from the scans. With the identified elastic parameters, the average error between experimental and numerical modal frequencies is less than 1.5% and the modal assurance criterion values for most modes are above 0.90. Furthermore, the extracted parameters are in the range of the results reported in the literature. In the second track, the focus is placed on the subject of leaky Lamb waves, which has received growing attention as a promising alternative to conventional ultrasound techniques for transcranial transmission, especially to access the brain periphery. Experiments are conducted on the same cranial bone segment set for leaky Lamb wave excitation and radiation characterization. The degassed skull bone segments are used in submersed experiments with an ultrasonic transducer and needle hydrophone setup for radiation pressure field scanning. Elastic parameters obtained from the first track are used in guided wave dispersion simulations, and the radiation angles are accurately predicted using the aforementioned layered model in the presence of fluid loading. The dominant radiation angles are shown to correspond to guided wave modes with low attenuation and a significant out-of-plane polarization. The experimental radiation spectra are finally compared against those obtained from time transient finite element simulations that leverage geometric models reconstructed from microcomputed tomographic scans. 
    more » « less
  5. ; ; ( , Sensors)
    Smartphone MEMS (Micro Electrical Mechanical System) accelerometers have relatively low sensitivity and high output noise density. Therefore, it cannot be directly used to track feeble vibrations such as structural vibrations. This article proposes an effective increase in the sensitivity of the smartphone accelerometer utilizing the stochastic resonance (SR) phenomenon. SR is an approach where, counter-intuitively, feeble signals are amplified rather than overwhelmed by the addition of noise. This study introduces the 2D-frequency independent underdamped pinning stochastic resonance (2D-FI-UPSR) technique, which is a customized SR filter that enables identifying the frequencies of weak signals. To validate the feasibility of the proposed SR filter, an iPhone device is used to collect bridge acceleration data during normal traffic operation and the proposed 2D-FI-UPSR filter is used to process these data. The first four fundamental bridge frequencies are successfully identified from the iPhone data. In parallel to the iPhone, a highly sensitive wireless sensing network consists of 15 accelerometers (Silicon Designs accelerometers SDI-2012) is installed to validate the accuracy of the extracted frequencies. The measurement fidelity of the iPhone device is shown to be consistent with the wireless sensing network data with approximately 1% error in the first three bridge frequencies and 3% error in the fourth frequency. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email