An official website of the United States government
Abstract Understanding the stress distribution within fiber‐reinforced polymers (FRPs) is critical to extending their operational lifespan. The integration of mechanoresponsive molecular force probes, referred to as mechanophores, presents a potential solution by enabling direct monitoring of stress concentrations. In this study, spiropyran (SP) mechanophores (MPs) are embedded within a polydimethylsiloxane (PDMS) matrix to visualize stress localization during loading within a single fiber‐reinforced framework. The SP mechanophore undergoes a transition from a non‐fluorescent state to an active state (merocyanine) through isomerization in response to mechanical forces. Using a single fiber mounted axially within the matrix, the fundamental failure modes observed in conventional fiber‐reinforced composites are replicated. Samples are strained under uniaxial tensile loading along the fiber direction and the localization of stresses is observed via MP activation. Stresses are concentrated in the matrix near the fiber region that gradually decreases away from the fiber surface. Confocal microscopy is used to visualize mechanophore activation and quantitatively assess fluorescence intensity. Finite element modeling is used to develop a calibration to quantify the stresses based on the observed fluorescence intensity. These outcomes underscore the viability of employing these mechanoresponsive molecules as a potential means to visualize real‐time stress distribution, thereby facilitating the design of high‐performance composites.
more »
« less
Fast reversible isomerization of merocyanine as a tool to quantify stress history in elastomers
A mechanochemistry based approach is proposed to detect and map stress history during dynamic processes. Spiropyran (SP), a force sensitive molecular probe, was incorporated as a crosslinker into multiple network elastomers (MNE). When these mechanochromic MNEs are loaded, SP undergoes a well-known force-activated reaction to merocyanine (MC) changing its absorption in the visible range (visible blue color). This SP to MC transition is not reversible within the time frame of the experiment and the color change reports the concentration of activated molecules. During subsequent loading–unloading cycles the MC undergoes a fast and reversible isomerization resulting in a slight shift of absorption spectrum and results in a second color change (blue to purple color corresponding to the loading–unloading cycles). Quantification of the color changes by using chromaticity shows that the exact color observed upon unloading is characteristic not only of the current stress (reported by the shift in color due to MC isomerization), but of the maximum stress that the material has seen during the loading cycle (reported by the shift in color due to the change in MC concentration). We show that these two color changes can be separated unambiguously and we use them to map the stress history in the loading and unloading process occurring as a crack opens up and propagates, breaking the material. Color maps on fractured samples are compared with finite element simulations and the agreement is excellent.
more »
« less
- Award ID(s):
- 1752449
- PAR ID:
- 10229712
- Date Published:
- Journal Name:
- Chemical Science
- Volume:
- 12
- Issue:
- 5
- ISSN:
- 2041-6520
- Page Range / eLocation ID:
- 1693 to 1701
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The mechanical properties of a polymer network reflect the collective behavior of all of the constituent strands within the network. These strands comprise a distribution of states, and a central question is how the deformation and tension experienced by a strand is influenced by strand length. Here, we address this question through the use of mechanophore force probes with discrete molecular weights. Probe strands, each bearing a mechanochromic spiropyran (SP), were prepared through an iterative synthetic strategy, providing uniform PDMS-functionalized SP force probes with molecular weights of 578, 1170, and 2356 g/mol. The probes were each doped (9 mM) into the same silicone elastomer matrix. Upon stretching, the materials change color, consistent with the expected conversion of SP to merocyanine (MC). The critical strain at which measurable mechanochromism is observed is correlated with the strain hardening of the matrix, but it is independent of the molecular length of the probe strand. When a network with activated strands is relaxed, the color dissipates, and the rate of decoloration varies as a function of the relaxing strain ((ε_r ) ̅); faster decoloration occurs at lower (ε_r ) ̅. The dependence of decoloration rate on (ε_r ) ̅ is taken to reflect the effect of residual tension in the once-activated strands on the reversion reaction of MC to SP, and the effect of that residual tension is indistinguishable across the three molecular lengths examined. The combination of discrete strand synthesis and mechanochromism provides a foundation to further test and develop molecular-based theories of elasticity and fracture in polymer networks.more » « less
-
Abstract A mechanochromic, programmable, cholesteric liquid crystalline elastomer (CLCE) is fabricated, and after straining, resulting in a blue shift through the visible spectrum, is returned to its initial shape and color upon heating through its isotropic phase transition. Light initiated, radical‐mediated, addition fragmentation chain transfer (AFT), facilitate permanent programming or erasure of thermoreversible shape and color by relaxing stress imparted on the strained network through reversible bond exchange. Thermoreversible strain is coupled with reversible color change and can be made permanent at any desired strain by light exposure and corresponding AFT activation, temporarily restoring nearly initial shape and color upon heating. The optical characteristics and photonic structure, inherently linked to the network, are measured as a function of strain, to confirm the reflection notch narrowing indicating that prepolymerization alignment via shearing is poor thereby causing a broad spectrum of reflected light that narrows when the material is stretched. Beyond programming a new shape and color, the reflection notch is erased and separately, photopatterned to achieve dynamic color schemes that are toggled with heating and cooling, similar to that of a chameleon's camouflaging technique that has the ability to manipulate multiple colors in a single material, also with use for strain mapping.more » « less
-
Anabaena sensory rhodopsin (ASR) is a particular microbial retinal protein for which light-adaptation leads to the ability to bind both the all- trans , 15- anti (AT) and the 13- cis , 15- syn (13C) isomers of the protonated Schiff base of retinal (PSBR). In the context of obtaining insight into the mechanisms by which retinal proteins catalyse the PSBR photo-isomerization reaction, ASR is a model system allowing to study, within the same protein, the protein–PSBR interactions for two different PSBR conformers at the same time. A detailed analysis of the vibrational spectra of AT and 13C, and their photo-products in wild-type ASR obtained through femtosecond (pump-) four-wave-mixing is reported for the first time, and compared to bacterio- and channelrhodopsin. As part of an extensive study of ASR mutants with blue-shifted absorption spectra, we present here a detailed computational analysis of the origin of the mutation-induced blue-shift of the absorption spectra, and identify electrostatic interactions as dominating steric effects that would entail a red-shift. The excited state lifetimes and isomerization reaction times (IRT) for the three mutants V112N, W76F, and L83Q are studied experimentally by femtosecond broadband transient absorption spectroscopy. Interestingly, in all three mutants, isomerization is accelerated for AT with respect to wild-type ASR, and this the more, the shorter the wavelength of maximum absorption. On the contrary, the 13C photo-reaction is slightly slowed down, leading to an inversion of the ESLs of AT and 13C, with respect to wt-ASR, in the blue-most absorbing mutant L83Q. Possible mechanisms for these mutation effects, and their steric and electrostatic origins are discussed.more » « less
-
In situ electrochemical cells were assembled with an amorphous germanium (a-Ge) film as working electrode and sodium foil as reference and counter electrode. The stresses generated in a-Ge electrodes due to electrochemical reaction with sodium were measured in real-time during the galvanostatic cycling. A specially designed patterned a-Ge electrode was cycled against sodium and the corresponding volume changes were measured using an AFM; it was observed that sodiation/desodiation of a-Ge results in more than 300% volume change, consistent with literature. The potential and stress response showed that the a-Ge film undergoes irreversible changes during the first sodiation process, but the subsequent desodiation/sodiation cycles are reversible. The stress response of the film reached steady-state after the initial sodiation and is qualitatively similar to the response of Ge during lithiation, i.e., initial linear elastic response followed by extensive plastic deformation of the film to accommodate large volume changes. However, despite being bigger ion, sodiation of Ge generated lower stress levels compared to lithiation. Consequently, the mechanical dissipation losses associated with plastic deformation are lower during sodiation process than it is for lithiation.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/d0sc06157c
