An official website of the United States government
Abstract Solar-thermal technologies for converting chemicals using thermochemistry require extreme light concentration. Exploiting plasmonic nanostructures can dramatically increase the reaction rates by providing more efficient solar-to-heat conversion by broadband light absorption. Moreover, hot-carrier and local field enhancement effects can alter the reaction pathways. Such discoveries have boosted the field of photothermal catalysis, which aims at driving industrially-relevant chemical reactions using solar illumination rather than conventional heat sources. Nevertheless, only large arrays of plasmonic nano-units on a substrate, i.e., plasmonic metasurfaces, allow a quasi-unitary and broadband solar light absorption within a limited thickness (hundreds of nanometers) for practical applications. Through moderate light concentration (∼10 Suns), metasurfaces reach the same temperatures as conventional thermochemical reactors, or plasmonic nanoparticle bed reactors reach under ∼100 Suns. Plasmonic metasurfaces, however, have been mostly neglected so far for applications in the field of photothermal catalysis. In this Perspective, we discuss the potentialities of plasmonic metasurfaces in this emerging area of research. We present numerical simulations and experimental case studies illustrating how broadband absorption can be achieved within a limited thickness of these nanostructured materials. The approach highlights the synergy among different enhancement effects related to the ordered array of plasmonic units and the efficient heat transfer promoting faster dynamics than thicker structures (such as powdered catalysts). We foresee that plasmonic metasurfaces can play an important role in developing modular-like structures for the conversion of chemical feedstock into fuels without requiring extreme light concentrations. Customized metasurface-based systems could lead to small-scale and low-cost decentralized reactors instead of large-scale, infrastructure-intensive power plants.
more »
« less
Plasmonic Nanostructures for Photothermal Conversion
The nonradiative conversion of light to heat by plasmonic nanostructures, the so‐called plasmonic photothermal effect, has attracted enormous attention due to their widespread potential applications. Herein, the perspectives on the design and preparation of plasmonic nanostructures for light to heat or photothermal conversion are provided. The general principle of plasmonic photothermal conversion is first introduced, and then, the strategies for improving efficiency are discussed, which is the focus of this field. Then, five typical application types are used, including solar energy harvesting, photothermal actuation, photothermal therapy, laser‐induced color printing, and high‐temperature photothermal devices, to elucidate how to tailor the nanomaterials to meet the requirements of these specific applications. In addition to the photothermal effect, other unique physical and chemical properties are coupled to further explore the application scenarios of plasmonic photothermal materials. Finally, a summary and the perspectives on the directions that may lead to the future development of this exciting field are also given.
more »
« less
- Award ID(s):
- 1941543
- PAR ID:
- 10240743
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Small Science
- Volume:
- 1
- Issue:
- 2
- ISSN:
- 2688-4046
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Plasmonic photocatalysis is an emerging research field that holds promise for sustainable energy applications, particularly in solar energy conversion. In this study, we focus on the enhancement of broadband light absorption capabilities for plasmonic photocatalyst under white light illumination. By replacing parts of the catalyst with solar absorber, we can significantly improve the total reaction rate under mild heating conditions with less catalyst. Through careful comparison of reaction conditions and systematic optimization of the contributions from photothermal and non-thermal effects, we demonstrate a substantial enhancement in broadband light absorption capacity and overall light effectiveness, paving the way for advanced plasmonic photocatalysts with greater efficiency and practical applicability using solar light as the energy source.more » « less
-
Abstract Incorporation of metallic nanoparticles (NPs) in polymer matrix has been used to enhance and control dissolution and release of drugs, for targeted drug delivery, as antimicrobial agents, localized heat sources, and for unique optoelectronic applications. Gold NPs in particular exhibit a plasmonic response that has been utilized for photothermal energy conversion. Because plasmonic nanoparticles typically exhibit a plasmon resonance frequency similar to the visible light spectrum, they present as good candidates for direct photothermal conversion with enhanced solar thermal efficiency in these wavelengths. In our work, we have incorporated ∼3-nm-diameter colloidal gold (Au c ) NPs into electrospun polyethylene glycol (PEG) fibers to utilize the nanoparticle plasmonic response for localized heating and melting of the polymer to release medical treatment. Au c and Au c in PEG (PEG+Au c ) both exhibited a minimum reflectivity at 522 nm or approximately green wavelengths of light under ultraviolet-visible (UV-Vis) spectroscopy. PEG+Au c ES fibers revealed a blue shift in minimum reflectivity at 504 nm. UV-Vis spectra were used to calculate the theoretical efficiency enhancement of PEG+Au c versus PEG alone, finding an approximate increase of 10 % under broad spectrum white light interrogation, and ∼14 % when illuminated with green light. Au c enhanced polymers were ES directly onto resistance temperature detectors and interrogated with green laser light so that temperature change could be recorded. Results showed a maximum increase of 8.9 °C. To further understand how gold nanomaterials effect the complex optical properties of our materials, spectroscopic ellipsometry was used. Using spectroscopic ellipsometry and modeling with CompleteEASE® software, the complex optical constants of our materials were determined. The complex optical constant n (index of refraction) provided us with optical density properties related to light wavelength divided by velocity, and k (extinction coefficient) was used to show the absorptive properties of the materials.more » « less
-
Localized surface plasmon resonances (LSPRs) in metallic nanostructures result in subwavelength optical confinement that enhances light–matter interactions, for example, aiding the sensitivity of surface spectroscopies. The dissipation of surface plasmons as electronic and vibrational excitations sets the limit for field confinement but also provides opportunities for photochemistry, photocatalysis, and photothermal heating. Optimization for either goal requires a deeper understanding of this photothermalization process. In this review, we focus on recent insights into the physics and dynamics governing photothermalization of LSPRs in metallic nanostructures, emphasizing comparisons between the steady-state behavior and ultrafast time-resolved studies. The differences between these regimes inform how to best optimize plasmonic systems for applications under relatively low-intensity, continuous illumination (e.g., sunlight).more » « less
-
Abstract Nanostructures made of metallic materials support collective oscillations of their conduction electrons, commonly known as surface plasmons. These modes, whose characteristics are determined by the material and morphology of the nanostructure, couple strongly to light and confine it into subwavelength volumes. Of particular interest are metallic nanostructures for which the size along one dimension approaches the nanometer or even the subnanometer scale, since such morphologies can lead to stronger light–matter interactions and higher degrees of confinement than regular three‐dimensional nanostructures. Here, the plasmonic response of metallic nanodisks of varying thicknesses and aspect ratios is investigated under far‐ and near‐field excitation conditions. It is found that, for far‐field excitation, the strength of the plasmonic response of the nanodisk increases with its thickness, as expected from the increase in the number of conduction electrons in the system. However, for near‐field excitation, the plasmonic response becomes stronger as the thickness of the nanodisk is reduced. This behavior is attributed to the higher efficiency with which a near‐field source couples to the plasmons supported by thinner nanodisks. The results of this work advance the understanding of the plasmonic response of thin metallic nanostructures, thus increasing their potential for the development of novel applications.more » « less
