skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Gd 3+ -activated narrowband ultraviolet-B persistent luminescence through persistent energy transfer
This work reports the realization of Gd 3+ persistent luminescence in the narrowband ultraviolet-B (NB-UVB; 310–313 nm) through persistent energy transfer from a sensitizer of Pr 3+ , Pb 2+ or Bi 3+ . We propose a general design concept to develop Gd 3+ -activated NB-UVB persistent phosphors from Pr 3+ -, Pb 2+ - or Bi 3+ -activated ultraviolet-C (200–280 nm) or ultraviolet-B (280–315 nm) persistent phosphors, leading to the discovery of ten Gd 3+ NB-UVB persistent phosphors such as Sr 3 Gd 2 Si 6 O 18 :Pr 3+ , Sr 3 Gd 2 Si 6 O 18 :Pb 2+ and Y 2 GdAl 2 Ga 3 O 12 :Bi 3+ as well as five ultraviolet-B persistent phosphors such as Y 3 Al 2 Ga 3 O 12 :Pr 3+ , Sr 3 Y 2 Si 6 O 18 :Pb 2+ and Y 3 Al 2 Ga 3 O 12 :Bi 3+ . The persistent energy transfer from the sensitizers to Gd 3+ is very efficient and the Gd 3+ NB-UVB afterglow can last for more than 10 hours. This study expands the persistent luminescence research to the NB-UVB as well as the broader ultraviolet-B spectral regions. The NB-UVB persistent phosphors may act as self-sustained glowing NB-UVB radiation sources for dermatological therapy.  more » « less
Award ID(s):
1705707
PAR ID:
10254014
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Dalton Transactions
Volume:
50
Issue:
10
ISSN:
1477-9226
Page Range / eLocation ID:
3499 to 3505
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Nature Communications)
    Abstract Visible-light and infrared-light persistent phosphors are extensively studied and are being used as self-sustained glowing tags in darkness. In contrast, persistent phosphors for higher-energy, solar-blind ultraviolet-C wavelengths (200–280 nm) are lacking. Also, persistent tags working in bright environments are not available. Here we report five types of Pr3+-doped silicates (melilite, cyclosilicate, silicate garnet, oxyorthosilicate, and orthosilicate) ultraviolet-C persistent phosphors that can act as self-sustained glowing tags in bright environments. These ultraviolet-C persistent phosphors can be effectively charged by a standard 254 nm lamp and emit intense, long-lasting afterglow at 265–270 nm, which can be clearly monitored and imaged by a corona camera in daylight and room light. Besides thermal-stimulation, in bright environments, photo-stimulation also contributes to the afterglow emission and its contribution can be dominant when ambient light is strong. This study expands persistent luminescence research to the ultraviolet-C wavelengths and brings persistent luminescence applications to light. 
    more » « less
  2. ; ; ; ; ; ; (, Journal of Materials Chemistry C)
    It is general knowledge in persistent luminescence that high-energy illumination, mostly ultraviolet light, is usually necessary in order to effectively charge persistent phosphors. However, the need for high-energy ultraviolet light excitation compromises some applications. In his pioneering work on ruby (Al 2 O 3 :Cr 3+ ) laser materials in 1960, Theodore Maiman observed an excited-state absorption phenomenon under the excitation of a high-intensity green-light flash tube. Inspired by Maiman's observation, here we propose a new two-photon up-conversion charging (UCC) concept to effectively charge Cr 3+ -activated near-infrared persistent phosphors using low-energy, high-intensity visible-light laser diodes. As an example, we demonstrate that a low-energy 635 nm laser diode can produce persistent luminescence in the LiGa 5 O 8 :Cr 3+ persistent phosphor at the same magnitude as that produced by high-energy 335 nm ultraviolet light from a xenon arc lamp. Moreover, the UCC appears to be a common phenomenon in persistent phosphors containing other UCC-enabling activators such as rare-earth Pr 3+ ions and transition metal Mn 2+ ions. The UCC technique offers a new way to study persistent luminescence and utilize persistent phosphors; for instance, in bioimaging it makes effective in vivo charging persistent optical probes using tissue-friendly visible light possible. 
    more » « less
  3. ; ; ; (, New Journal of Chemistry)
    New optical materials with efficient luminescence and scintillation properties have drawn a great deal of attention due to the demand for optoelectronic devices and medical theranostics. Their nanomaterials are expected to reduce the cost while incrementing the efficiency for potential lighting and scintillator applications. In this study, we have developed praseodymium-doped lanthanum hafnate (La 2 Hf 2 O 7 :Pr 3+ ) pyrochlore nanoparticles (NPs) using a combined co-precipitation and relatively low-temperature molten salt synthesis procedure. XRD and Raman investigations confirmed ordered pyrochlore phase for the as-synthesized undoped and Pr 3+ -doped La 2 Hf 2 O 7 NPs. The emission profile displayed the involvement of both the 3 P 0 and 1 D 2 states in the photoluminescence process, however, the intensity of the emission from the 1 D 2 states was found to be higher than that from the 3 P 0 states. This can have a huge implication on the design of novel red phosphors for possible application in solid-state lighting. As a function of the Pr 3+ concentration, we found that the 0.1%Pr 3+ doped La 2 Hf 2 O 7 NPs possessed the strongest emission intensity with a quantum yield of 20.54 ± 0.1%. The concentration quenching, in this case, is mainly induced by the cross-relaxation process 3 P 0 + 3 H 4 → 1 D 2 + 3 H 6 . Emission kinetics studies showed that the fast decaying species arise because of the Pr 3+ ions occupying the Hf 4+ sites, whereas the slow decaying species can be attributed to the Pr 3+ ions occupying the La 3+ sites in the pyrochlore structure of La 2 Hf 2 O 7 . X-ray excited luminescence (XEL) showed a strong red-light emission, which showed that the material is a promising scintillator for radiation detection. In addition, the photon counts were found to be much higher when the NPs are exposed to X-rays when compared to ultraviolet light. Altogether, these La 2 Hf 2 O 7 :Pr 3+ NPs have great potential as a good down-conversion phosphor as well as scintillator material. 
    more » « less
  4. ; (, Dalton Transactions)
    null (Ed.)
    The origin in deshielding of 29 Si NMR chemical shifts in R 3 Si–X, where X = H, OMe, Cl, OTf, [CH 6 B 11 X 6 ], toluene, and O X (O X = surface oxygen), as well as i Pr 3 Si + and Mes 3 Si + were studied using DFT methods. At the M06-L/6-31G(d,p) level of theory the geometry optimized structures agree well with those obtained experimentally. The trends in 29 Si NMR chemical shift also reproduce experimental trends; i Pr 3 Si–H has the most shielded 29 Si NMR chemical shift and free i Pr 3 Si + or isolable Mes 3 Si + have the most deshielded 29 Si NMR chemical shift. Natural localized molecular orbital (NLMO) analysis of the contributions to paramagnetic shielding ( σ p ) in these compounds shows that Si–R (R = alkyl, H) bonding orbitals are the major contributors to deshielding in this series. The Si–R bonding orbitals are coupled to the empty p-orbital in i Pr 3 Si + or Mes 3 Si + , or to the orbital in R 3 Si–X. This trend also applies to surface bound R 3 Si–O X . This model also explains chemical shift trends in recently isolated t Bu 2 SiH 2 + , t BuSiH 2 + , and SiH 3 + that show more shielded 29 Si NMR signals than R 3 Si + species. There is no correlation between isotropic 29 Si NMR chemical shift and charge at silicon. 
    more » « less
  5. ; ; ; ; (, Journal of Materials Chemistry C)
    null (Ed.)
    There is a significant need to identify cyan-emitting phosphors capable of filling the “cyan-gap” (480–520 nm) in full-visible-spectrum phosphor-converted white light-emitting diodes (pc-wLEDs). Here, a new broadband cyan-emitting phosphor that enables addressing of this challenge is reported. The compound, Ba 2 CaB 2 Si 4 O 14 :Ce 3+ , presents a bright cyan emission peaking at 478 nm with a large full width at half maximum of 142 nm (6053 cm −1 ), and minimal thermal quenching. The photoluminescence properties originate from Ce 3+ residing at two different crystallographic sites, a [BaO 9 ] distorted elongated square pyramid and a [CaO 6 ] trigonal prism. This combination results in an efficient, broad emission covering the blue to green region of the visible spectrum. Fabricating a simple dichromatic ultraviolet ( λ ex = 370 nm) pumped pc-wLED using Ba 2 CaB 2 Si 4 O 14 :Ce 3+ along with a commercially available red phosphor demonstrates full-visible-spectrum white light with high color rendering index ( R a > 90) and tunable correlated color temperature, showing the potential of this material for achieving high-quality LED-based lighting. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email