An official website of the United States government
Metasurface design tends to be tedious and time-consuming based on sweeping geometric parameters. Common numerical simulation techniques are slow for large areas, ultra-fine grids, and/or three-dimensional simulations. Simulation time can be reduced by combining the principle of the discrete dipole approximation (DDA) with analytical solutions for light scattered by a dipole near a flat surface. The DDA has rarely been used in metasurface design, and comprehensive benchmarking comparisons are lacking. Here, we compare the accuracy and speed of three DDA methods—substrate discretization, two-dimensional Cartesian Green’s functions, and one-dimensional (1D) cylindrical Green’s functions—against the finite difference time domain (FDTD) method. We find that the 1D cylindrical approach performs best. For example, the s-polarized field scattered from a silica-substrate-supported 600 × 180 × 60 nm gold elliptic nanocylinder discretized into 642 dipoles is computed with 0.78 % pattern error and 6.54 % net power error within 294 s, which is 6 times faster than FDTD. Our 1D cylindrical approach takes advantage of parallel processing and also gives transmitted field solutions, which, to the best of our knowledge, is not found in existing tools. We also examine the differences among four polarizability models: Clausius–Mossotti, radiation reaction, lattice dispersion relation, and digitized Green’s function, finding that the radiation reaction dipole model performs best in terms of pattern error, while the digitized Green’s function has the lowest power error.
more »
« less
Accurate and fast modeling of scattering from random arrays of nanoparticles using the discrete dipole approximation and angular spectrum method
Lens-free microscopes can utilize holographic reconstruction techniques to recover the image of an object from the digitally recorded superposition of an unperturbed plane wave and a wave scattered by the object. Image reconstruction most commonly relies on the scalar angular spectrum method (ASM). While fast, the scalar ASM can be inaccurate for nanoscale objects, either because of the scalar approximation, or more generally, because it only models field propagation and not light-matter interaction, including inter-particle coupling. Here we evaluate the accuracy of the scalar ASM when combined with three different light-matter interaction models for computing the far-field light scattered by random arrays of gold and polystyrene nanoparticles. Among the three models—a dipole-matched transmission model, an optical path length model, and a binary amplitude model—we find that which model is most accurate depends on the nanoparticle material and packing density. For polystyrene particles at any packing density, there is always at least one model with error below 20%, while for gold nanoparticles with 40% or 50% surface coverage, there are no models that can provide errors better than 30%. The ASM error is determined in comparison to a discrete dipole approximation model, which is more computationally efficient than other full-wave modeling techniques. The knowledge of when and how the ASM fails can serve as a first step toward improved resolution in lens-free reconstruction and can also be applied to other random nanoparticle array applications such as lens-based super-resolution imaging, sub-diffraction beam focusing, and biomolecular sensing.
more »
« less
- Award ID(s):
- 1807590
- PAR ID:
- 10268284
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Optics Express
- Volume:
- 29
- Issue:
- 14
- ISSN:
- 1094-4087; OPEXFF
- Format(s):
- Medium: X Size: Article No. 22761
- Size(s):
- Article No. 22761
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Manipulation of nanoparticles by light induced forces is widely used in nanotechnology and bioengineering. In normal cases, when a nanoparticle is illuminated by light waves, the transfer of momentum from light to the nanoparticle can push it to move along the light propagation direction. On the other hand, the lateral optical force can transport an object perpendicular to the light propagation direction, and the optical pulling force can attract an object toward the light source. Although these optical forces have drawn growing attention, in situ tuning of them is rarely explored. In this paper, tuning of both lateral optical forces and optical pulling forces is numerically demonstrated via a graphene/α‐phase molybdenum trioxide (α‐MoO3) bilayer structure. Under plane‐wave illumination, both the amplitude and direction of the optical forces exerted on a nanoparticle above this bilayer structure can be tuned in the mid‐infrared range. The underlying mechanism can be understood by studying the corresponding isofrequency contours of the hybrid plasmon‐phonon polaritons supported by the graphene/α‐MoO3bilayer. The analytical study using the dipole approximation method reproduces the numerical results, revealing the origin of the optical forces. This work opens a new avenue for engineering optical forces to manipulate various objects optically.more » « less
-
Dye-doped nanoparticles have been investigated as bright, fluorescent probes for localization-based super-resolution microscopy. Nanoparticle size is important in super-resolution microscopy to get an accurate size of the object of interest from image analysis. Due to their self-blinking behavior and metal-enhanced fluorescence (MEF), Ag@SiO2and Au@Ag@SiO2nanoparticles have shown promise as probes for localization-based super-resolution microscopy. Here, several noble metal-based dye-doped core-shell nanoparticles have been investigated as self-blinking nanomaterial probes. It was observed that both the gold- and silver-plated nanoparticle cores exhibit weak luminescence under certain conditions due to the surface plasmon resonance bands produced by each metal, and the gold cores exhibit blinking behavior which enhances the blinking and fluorescence of the dye-doped nanoparticle. However, the silver-plated nanoparticle cores, while weakly luminescent, did not exhibit any blinking; the dye-doped nanoparticle exhibited the same behavior as the core fluorescent, but did not blink. Because of the blinking behavior, stochastic optical reconstruction microscopy (STORM) super-resolution analysis was able to be performed with performed on the gold core nanoparticles. A preliminary study on the use of these nanoparticles for localization-based super-resolution showed that these nanoparticles are suitable for use in STORM super resolution. Resolution enhancement was two times better than the diffraction limited images, with core sizes reduced to 15 nm using the hybrid Au–Ag cores.more » « less
-
When we illuminate gold nanofluids over indium-tin-oxide (ITO)-coated substrates, nanoparticle chains selfassemble via optical binding forces. We speculate that charge transfer between gold and ITO pins nanoparticles to the substrate and reduces the lateral Brownian motion as they attach to the substrate. We correspondingly model the self assembly with additional stochastic or random forces. Simulations show a nonequilibrium phase transition: when the stochastic force is small, nanoparticle chains align perpendicular to the light polarization and nanoparticles settle at shallow but stable nodes; when the stochastic force is large, however, the nanoparticle chains align parallel to the light polarization and nanoparticles settle at saddlepoints where the optical binding force is largely zero. Since the presence and strength of Brownian forces influence which state is formed, we reconsider the role that surfaces have—not only in relation to charge transfer but also heat transfer.more » « less
-
Gold nanoparticles are versatile materials for biological applications because their properties can be modulated by assembling ligands on their surface to form monolayers. However, the physicochemical properties and behaviors of monolayer-protected nanoparticles in biological environments are difficult to anticipate because they emerge from the interplay of ligand–ligand and ligand–solvent interactions that cannot be readily inferred from ligand chemical structure alone. In this work, we demonstrate that quantitative nanostructure–activity relationship (QNAR) models can employ descriptors calculated from molecular dynamics simulations to predict nanoparticle properties and cellular uptake. We performed atomistic molecular dynamics simulations of 154 monolayer-protected gold nanoparticles and calculated a small library of simulation-derived descriptors that capture nanoparticle structural and chemical properties in aqueous solution. We then parametrized QNAR models using interpretable regression algorithms to predict experimental measurements of nanoparticle octanol–water partition coefficients, zeta potentials, and cellular uptake obtained from a curated database. These models reveal that simulation-derived descriptors can accurately predict experimental trends and provide physical insight into what descriptors are most important for obtaining desired nanoparticle properties or behaviors in biological environments. Finally, we demonstrate model generalizability by predicting cell uptake trends for 12 nanoparticles not included in the original data set. These results demonstrate that QNAR models parametrized with simulation-derived descriptors are accurate, generalizable computational tools that could be used to guide the design of monolayer-protected gold nanoparticles for biological applications without laborious trial-and-error experimentation.more » « less
