skip to main content


Title: Deformation and orientational order of chiral membranes with free edges
Motivated by experiments on colloidal membranes composed of chiral rod-like viruses, we use Monte Carlo methods to simulate these systems and determine the phase diagram for the liquid crystalline order of the rods and the membrane shape. We generalize the Lebwohl–Lasher model for a nematic with a chiral coupling to a curved surface with edge tension and a resistance to bending, and include an energy cost for tilting of the rods relative to the local membrane normal. The membrane is represented by a triangular mesh of hard beads joined by bonds, where each bead is decorated by a director. The beads can move, the bonds can reconnect and the directors can rotate at each Monte Carlo step. When the cost of tilt is small, the membrane tends to be flat, with the rods only twisting near the edge for low chiral coupling, and remaining parallel to the normal in the interior of the membrane. At high chiral coupling, the rods twist everywhere, forming a cholesteric state. When the cost of tilt is large, the emergence of the cholesteric state at high values of the chiral coupling is accompanied by the bending of the membrane into a saddle shape. Increasing the edge tension tends to flatten the membrane. These results illustrate the geometric frustration arising from the inability of a surface normal to have twist.  more » « less
Award ID(s):
2020098 1634552
NSF-PAR ID:
10279289
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Soft Matter
Volume:
17
Issue:
27
ISSN:
1744-683X
Page Range / eLocation ID:
6580 to 6588
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Using a combination of theory and experiments we study the interface between two immiscible domains in a colloidal membrane composed of rigid rods of different lengths. Geometric considerations of rigid rod packing imply that a domain of sufficiently short rods in a background membrane of long rods is more susceptible to twist than the inverse structure, a long-rod domain in a short-rod membrane background. The tilt at the inter-domain edge forces splay, which in turn manifests as a spontaneous edge curvature whose energetics are controlled by the length asymmetry of constituent rods. A thermodynamic model of such tilt-curvature coupling at inter-domain edges explains a number of experimental observations, including a non-monotonic dependence of the edge twist on the domain radius, and annularly shaped domains of long rods. Our work shows how coupling between orientational and compositional degrees of freedom in two-dimensional fluids give rise to complex shapes and thermodynamics of domains, analogous to shape transitions in 3D fluid vesicles. 
    more » « less
  2. Chiral condensed matter systems, such as liquid crystals and magnets, exhibit a host of spatially localized topological structures that emerge from the medium’s tendency to twist and its competition with confinement and field coupling effects. We show that the strength of perpendicular surface boundary conditions can be used to control the structure and topology of solitonic and other localized field configurations. By combining numerical modeling and threedimensional imaging of the director field, we reveal structural stability diagrams and intertransformation of twisted walls and fingers, torons and skyrmions and their crystalline organizations upon changing boundary conditions. Our findings provide a recipe for controllably realizing skyrmions, torons and hybrid solitonic structures possessing features of both of them, which will aid in fundamental explorations and technological uses of such topological solitons. Moreover, with limited examples, we discuss how similar principles can be systematically used to tune stability of twisted walls versus cholesteric fingers and hopfions versus skyrmions, torons and twistions. 
    more » « less
  3. Abstract

    A constant angle of twist was applied to silica glass rods in order to produce a torsional shear strain and a reduction in torque representative of the stress state in the glass was measured as a function of time when rods were heat‐treated in air at temperatures, 550‐700°C, far below the glass transition temperature. The monotonic decrease of torque with time was explained by surface stress relaxation, which can be described by a relaxation of stress at the surface of glass which is promoted by water. The obtained surface stress relaxation diffusion coefficients were consistent with those obtained earlier from silica glass fiber bending under a similar water vapor pressure. The observed relaxation in torsion supports the mechanism of surface stress relaxation over the swelling‐based mechanism for applications including glass fiber strengthening.

     
    more » « less
  4. null (Ed.)
    Abstract Elastic gridshell is a class of net-like structure formed by an ensemble of elastically deforming rods coupled through joints, such that the structure can cover large areas with low self-weight and allow for a variety of aesthetic configurations. Gridshells, also known as X-shells or Cosserat Nets, are a planar grid of elastic rods in its undeformed configuration. The end points of the rods are constrained and positioned on a closed curve—the final boundary—to actuate the structure into a 3D shape. Here, we report a discrete differential geometry-based numerical framework to study the geometrically nonlinear deformation of gridshell structures, accounting for non-trivial bending-twisting coupling at the joints. The form-finding problem of obtaining the undeformed planar configuration given the target convex 3D topology is then investigated. For the forward (2D to 3D) physically based simulation, we decompose the gridshell structure into multiple one-dimensional elastic rods and simulate their deformation by the well-established discrete elastic rods (DER) algorithm. A simple penalty energy between rods and linkages is used to simulate the coupling between two rods at the joints. For the inverse problem associated with form-finding (3D to 2D), we introduce a contact-based algorithm between the elastic gridshell and a rigid 3D surface, where the rigid surface describes the target shape of the gridshell upon actuation. This technique removes the need of several forward simulations associated with conventional optimization algorithms and provides a direct solution to the inverse problem. Several examples—hemispherical cap, paraboloid, and hemi-ellipsoid—are used to show the effectiveness of the inverse design process. 
    more » « less
  5. Assessing the effects of input uncertainty on simulation results for multiphase flows will allow for more robust engineering designs and improved devices. For example, in atomizing jets, surface tension plays a critical role in determining when and how coherent liquid structures break up. Uncertainty in the surface tension coefficient can lead to uncertainty in spray angle, drop size, and velocity distribution. Uncertainty quantification (UQ) determines how input uncertainties affect outputs, and the approach taken can be classified as non-intrusive or intrusive. A classical, non-intrusive approach is the Monte-Carlo scheme, which requires multiple simulation runs using samples from a distribution of inputs. Statistics on output variability are computed from the many simulation outputs. While non-intrusive schemes are straightforward to implement, they can quickly become cost prohibitive, suffer from convergence issues, and have problems with confounding factors, making it difficult to look at uncertainty in multiple variables at once. Alternatively, an intrusive scheme inserts stochastic (uncertain) variables into the governing equations, modifying the mathematics and numerical methods used, but possibly reducing computational cost. In this work, we extend UQ methods developed for single-phase flows to handle gas-liquid multiphase dynamics by developing a stochastic conservative level set approach and a stochastic continuous surface tension method. An oscillating droplet and a 2-D atomizing jet are used to test the method. In these test cases, uncertainty about the surface tension coefficient and initial starting position will be explored, including the impact on breaking/ merging interfaces. 
    more » « less