skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Determining the Orientation of Ocean-Bottom Seismometers on the Seafloor and Correcting for Polarity Flipping via Polarization Analysis and Waveform Modeling
Title: Determining the Orientation of Ocean-Bottom Seismometers on the Seafloor and Correcting for Polarity Flipping via Polarization Analysis and Waveform Modeling
Abstract The erroneous flipping of polarity in seismic records of ocean-bottom seismometers (OBSs) could go unnoticed and undiagnosed because it is coupled with unknown horizontal orientation of OBS instruments on the seafloor. In this study, we present detailed approaches to first identify potential errors in the flipping polarity of individual OBS instruments, and then determine the correct orientation of OBS instruments on the seafloor. We first conduct a series of tests by artificially flipping the polarity of seismic records of the Global Seismographic Network stations to determine the effects on orientation estimates, utilizing polarization characteristics of teleseismic P and Rayleigh waves, respectively. The tests demonstrate that erroneous polarity reversal in seismic recording could cause false estimates and reverse radial (R) and tangential (T) components. We determine the sensor orientations through comparing the observed waveforms to the synthetic waveforms, which could solve the ambiguity of R and T directions caused by potential erroneous polarity reversal of OBS data. We then apply the approaches to an OBS data set collected in the southern Mariana subduction zone to obtain the correct orientation for 9 out of 12 OBS instruments.  more » « less
Award ID(s):
2001728
PAR ID:
10279686
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Seismological Research Letters
Volume:
91
Issue:
2A
ISSN:
0895-0695
Page Range / eLocation ID:
814 to 825
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Seismological Research Letters)
    Abstract The Alaska Amphibious Community Seismic Experiment (AACSE) is a shoreline-crossing passive- and active-source seismic experiment that took place from May 2018 through August 2019 along an ∼700  km long section of the Aleutian subduction zone spanning Kodiak Island and the Alaska Peninsula. The experiment featured 105 broadband seismometers; 30 were deployed onshore, and 75 were deployed offshore in Ocean Bottom Seismometer (OBS) packages. Additional strong-motion instruments were also deployed at six onshore seismic sites. Offshore OBS stretched from the outer rise across the trench to the shelf. OBSs in shallow water (<262  m depth) were deployed with a trawl-resistant shield, and deeper OBSs were unshielded. Additionally, a number of OBS-mounted strong-motion instruments, differential and absolute pressure gauges, hydrophones, and temperature and salinity sensors were deployed. OBSs were deployed on two cruises of the R/V Sikuliaq in May and July 2018 and retrieved on two cruises aboard the R/V Sikuliaq and R/V Langseth in August–September 2019. A complementary 398-instrument nodal seismometer array was deployed on Kodiak Island for four weeks in May–June 2019, and an active-source seismic survey on the R/V Langseth was arranged in June 2019 to shoot into the AACSE broadband network and the nodes. Additional underway data from cruises include seafloor bathymetry and sub-bottom profiles, with extra data collected near the rupture zone of the 2018 Mw 7.9 offshore-Kodiak earthquake. The AACSE network was deployed simultaneously with the EarthScope Transportable Array (TA) in Alaska, effectively densifying and extending the TA offshore in the region of the Alaska Peninsula. AACSE is a community experiment, and all data were made available publicly as soon as feasible in appropriate repositories. 
    more » « less
  2. ; ; ; ; ; ; (, Seismological Research Letters)
    null (Ed.)
    Abstract An effective approach was developed for identifying and correcting ocean-bottom seismometer (OBS) time errors through improving ambient noise cross-correlation function (NCCF) analysis and combination with other methods. Significant improvements were illustrated through analyzing data from a passive-source seismic experiment in the southwestern sub-basin of the South China Sea. A novel method was first developed that can effectively identify errors in the sampling frequency of the OBS instruments. The traditional NCCF method was then expanded by increasing the analyzed data spectrum from a single-frequency band to dual-frequency band pairs, thus doubling the number of available data points and substantially improving the time correction quality. For data with relatively low signal-to-noise ratios, the average time errors were reduced from the original average values of 60–80 ms by the conventional methods to <40  ms using the improved approaches. The new multistep procedure developed in this study has general applicability to analysis of other OBS experiments. The demonstrated significant improvements in the data quality are critical for advancing seismic tomography and other modern marine geophysical studies that require high accuracy in the OBS data. 
    more » « less
  3. ; ; ; ; (, Journal of Geophysical Research: Solid Earth)
    Abstract A shallow sub‐seafloor seismic model that includes well‐determined seismic velocities and clarifies sediment‐crust discontinuities is needed to characterize the physical properties of marine sediments and the oceanic crust and to serve as a reference for deeper seismic modeling endeavors. This study estimates the seismic structure of marine sediments and the shallow oceanic crust of the Alaska‐Aleutian subduction zone at the Alaska Peninsula, using data from the Alaska Amphibious Community Seismic Experiment (AACSE). We measure seafloor compliance and Ps converted wave delays from AACSE ocean‐bottom seismometers (OBS) and seafloor pressure data and interpret these measurements using a joint Bayesian Monte Carlo inversion to produce a sub‐seafloor S‐wave velocity model beneath each available OBS station. The sediment thickness across the array varies considerably, ranging from about 50 m to 2.80 km, with the thickest sediment located in the continental slope. Lithological composition plays an important role in shaping the seismic properties of seafloor sediment. Deep‐sea deposits on the incoming plate, which contain biogenic materials, tend to have reduced S‐wave velocities, contrasting with the clay‐rich sediments in the shallow continental shelf and continental slope. A difference in S‐wave velocities is observed for upper oceanic crust formed at fast‐rate (Shumagin) and intermediate‐rate (Semidi) spreading centers. The reduced S‐wave velocities in the Semidi crust may be caused by increased faulting and possible lithological variations, related to a previous period of intermediate‐rate spreading. 
    more » « less
  4. ; ; ; ; ; ; ; (, Seismological Research Letters)
    Abstract The Pacific ocean-bottom seismometer (OBS) Research into Convecting Asthenosphere (ORCA) experiment deployed two 30-station seismic arrays between 2018 and 2020—a US contribution to the international PacificArray project. The “Young ORCA” array deployed on ∼40 Ma central Pacific seafloor had a ∼68% data recovery rate, whereas the “Old ORCA” array deployed on ∼120 Ma southwest Pacific seafloor had a ∼80% recovery rate. We detail here the seismic data quality, spectral characteristics, and engineering challenges of this experiment. We provide information to assist users of this dataset, including OBS orientations and tables of daily data quality for all channels. Preliminary analysis illustrates the utility of these data for surface- and body-wave seismic imaging. 
    more » « less
  5. (, Frontiers in Earth Science)
    null (Ed.)
    It is generally thought that high noise levels in the oceans inhibit the observation of long-period earthquake signals such as Earth’s normal modes on ocean bottom seismometers (OBSs). Here, we document the observation of Earth’s gravest modes at periods longer than 500 s (or frequencies below 2 mHz). We start with our own 2005–2007 Plume-Lithosphere-Undersea-Mantle Experiment (PLUME) near Hawaii that deployed a large number of broadband OBSs for the first time. We collected high-quality normal mode spectra for the great November 15, 2006 Kuril Islands earthquake on multiple OBSs. The random deployment of instruments from different OBS groups allows a direct comparison between different broadband seismometers. For this event, mode S 0 6 (1.038 mHz) consistently rises above the background noise at all OBSs that had a Nanometrics Trillium T-240 broadband seismometer. We also report observations of other deployments in the Pacific ocean that involved instruments of the U.S. OBS Instrument Pool (OBSIP) where we observe even mode S 0 4 (0.647 mHz). Earth’s normal modes were never the initial target of any OBS deployment, nor was any other ultra-low-frequency signal. However, given the high costs of an OBS campaign, the fact that data are openly available to future investigators not involved in the campaign, and the fact that seismology is evolving to investigate ever-new signals, this paper makes the case that the investment in a high-quality seismic sensor may be a wise one, even for a free-fall OBS. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email