More Like this

1. 3D microfluidics via cyclic olefin polymer-based in situ direct laser writing

   https://doi.org/10.1039/C9LC00542K  

   Alsharhan, Abdullah T. ; Acevedo, Ruben ; Warren, Roseanne ; Sochol, Ryan D. ( August 2019 , Lab on a Chip)

   In situ direct laser writing ( is DLW) strategies that facilitate the printing of three-dimensional (3D) nanostructured components directly inside of, and fully sealed to, enclosed microchannels are uniquely suited for manufacturing geometrically complex microfluidic technologies. Recent efforts have demonstrated the benefits of using micromolding and bonding protocols for is DLW; however, the reliance on polydimethylsiloxane (PDMS) leads to limited fluidic sealing ( e.g. , operational pressures <50–75 kPa) and poor compatibility with standard organic solvent-based developers. To bypass these issues, here we explore the use of cyclic olefin polymer (COP) as an enabling microchannel material for is DLW by investigating three fundamental classes of microfluidic systems corresponding to increasing degrees of sophistication: (i) “2.5D” functionally static fluidic barriers (10–100 μm in height), which supported uncompromised structure-to-channel sealing under applied input pressures of up to 500 kPa; (ii) 3D static interwoven microvessel-inspired structures (inner diameters < 10 μm) that exhibited effective isolation of distinct fluorescently labelled microfluidic flow streams; and (iii) 3D dynamically actuated microfluidic transistors, which comprised bellowed sealing elements (wall thickness = 500 nm) that could be actively deformed via an applied gate pressure to fully obstruct source-to-drain fluid flow. In combination, these results suggest that COP-based is DLW offers a promising pathway to wide-ranging fluidic applications that demand significant architectural versatility at submicron scales with invariable sealing integrity, such as for biomimetic organ-on-a-chip systems and integrated microfluidic circuits. 

   more » « less
2. 3D‐Printed Microinjection Needle Arrays via a Hybrid DLP‐Direct Laser Writing Strategy

   https://doi.org/10.1002/admt.202201641  

   Sarker, Sunandita ; Colton, Adira ; Wen, Ziteng ; Xu, Xin ; Erdi, Metecan ; Jones, Anthony ; Kofinas, Peter ; Tubaldi, Eleonora ; Walczak, Piotr ; Janowski, Miroslaw ; et al ( February 2023 , Advanced Materials Technologies)

   Microinjection protocols are ubiquitous throughout biomedical fields, with hollow microneedle arrays (MNAs) offering distinctive benefits in both research and clinical settings. Unfortunately, manufacturing‐associated barriers remain a critical impediment to emerging applications that demand high‐density arrays of hollow, high‐aspect‐ratio microneedles. To address such challenges, here, a hybrid additive manufacturing approach that combines digital light processing (DLP) 3D printing with “ex situ direct laser writing (esDLW)” is presented to enable new classes of MNAs for fluidic microinjections. Experimental results foresDLW‐based 3D printing of arrays of high‐aspect‐ratio microneedles—with 30 µm inner diameters, 50 µm outer diameters, and 550 µm heights, and arrayed with 100 µm needle‐to‐needle spacing—directly onto DLP‐printed capillaries reveal uncompromised fluidic integrity at the MNA‐capillary interface during microfluidic cyclic burst‐pressure testing for input pressures in excess of 250 kPa (n = 100 cycles). Ex vivo experiments perform using excised mouse brains reveal that the MNAs not only physically withstand penetration into and retraction from brain tissue but also yield effective and distributed microinjection of surrogate fluids and nanoparticle suspensions directly into the brains. In combination, the results suggest that the presented strategy for fabricating high‐aspect‐ratio, high‐density, hollow MNAs could hold unique promise for biomedical microinjection applications.

    

   more » « less
3. Geometric Determinants of In-Situ Direct Laser Writing

   https://doi.org/10.1038/s41598-018-36727-z  

   Lamont, Andrew C. ; Alsharhan, Abdullah T. ; Sochol, Ryan D. ( January 2019 , Scientific Reports)

   Direct laser writing (DLW) is a three-dimensional (3D) manufacturing technology that offers significant geometric versatility at submicron length scales. Although these characteristics hold promise for fields including organ modeling and microfluidic processing, difficulties associated with facilitating the macro-to-micro interfaces required for fluid delivery have limited the utility of DLW for such applications. To overcome this issue, here we report anin-situDLW (isDLW) strategy for creating 3D nanostructured features directly inside of—and notably, fully sealed to—sol-gel-coated elastomeric microchannels. In particular, we investigate the role of microchannel geometry (e.g., cross-sectional shape and size) in the sealing performance ofisDLW-printed structures. Experiments revealed that increasing the outward tapering of microchannel sidewalls improved fluidic sealing integrity for channel heights ranging from 10μm to 100μm, which suggests that conventional microchannel fabrication approaches are poorly suited forisDLW. As a demonstrative example, we employedisDLW to 3D print a microfluidic helical coil spring diode and observed improved flow rectification performance at higher pressures—an indication of effective structure-to-channel sealing. We envision that the ability to readily integrate 3D nanostructured fluidic motifs with the entire luminal surface of elastomeric channels will open new avenues for emerging applications in areas such as soft microrobotics and biofluidic microsystems.

    

   more » « less
4. Toward Deterministic Lateral Displacement-Based Continuous-Flow Microfluidic Particle Reactors via Direct Laser Writing

   Colton, Adira ; Young, Olivia ; Razulla, Talha ; Warren, Roseanne ; Sochol, Ryan D. ( June 2022 , Proceedings of the 20th Solid-State Sensors, Actuators and Microsystems Workshop (Hilton Head Workshop 2022))

   Multi-stage fluidic reaction schemes for suspended particles (e.g., micro/nanospheres, cells, bacterial species, and extracellular vesicles) underly a diversity of chemical and biological applications. Conventional methods for executing such protocols can be exceedingly time, labor, and/or cost intensive. Microfluidic strategies can address these drawbacks; however, such technologies typically rely on clean room-based microfabrication that suffer from similar deficits for manufacturing the chips. To simultaneously overcome these challenges, here we explore the use of the submicron-scale additive manufacturing approach, “Two-Photon Direct Laser Writing (DLW)”, as a means for fabricating micro-fluidic “Deterministic Lateral Displacement (DLD)” arrays capable of passively guiding suspended particles across discrete, adjacent flow streams—the fundamental capability of continuous-flow multi-stage particle microreactors. Experimental results from microfluidic experimentation with 5 μm-in-diameter fluorescent particles revealed effective particle transport across flow streams, with 87.5% of fluorescent peaks detected in the designated, opposing outlet following the DLD array. These results suggest utility of the presented approach for micro- and nanoparticle-based microfluidic reactors targeting wide-ranging chemical and biological applications. 

   more » « less
5. An Investigation of Integrated Multiscale Three-Dimensional Printing for Hierarchical Structures Fabrication

   https://doi.org/10.1115/1.4054317  

   Li, Xiangjia ; Baldacchini, Tommaso ; Chen, Yong ( December 2021 , Journal of Micro- and Nano-Manufacturing)

   Abstract Nature provides us with a large number of functional material systems consisting of hierarchical structures, where significant variations in dimensions are present. Such hierarchical structures are difficult to build by traditional manufacturing processes due to manufacturing limitations. Nowadays, three-dimensional (3D) objects with complex structures can be built by gradually accumulating in a layer-based additive manufacturing (AM); however, the hierarchical structure measured from macroscale to nanoscale sizes still raises significant challenges to the AM processes, whose manufacturing capability is intrinsically specified within a certain scope. It is desired to develop a multiscale AM process to narrow this gap between scales of feature in hierarchical structures. This research aims to investigate an integration approach to fabricating hierarchical objects that have macro-, micro-, and nano-scales features in an object. Firstly, the process setup and the integrated process of two-photon polymerization (TPP), immersed surface accumulation (ISA), and mask image projection-based stereolithography (MIP-SL) were introduced to address the multiscale fabrication challenge. Then, special hierarchical design and process planning toward integrating multiple printing processes are demonstrated. Lastly, we present two test cases built by our hierarchical printing method to validate the feasibility and efficiency of the proposed multiscale hierarchical printing approach. The results demonstrated the capability of the developed multiscale 3D printing process and showed its future potential in various novel applications, such as optics, microfluidics, cell culture, as well as interface technology. 

   more » « less