Since their inception, quantum dots have proven to be advantageous for light management applications due to their high brightness and well‐controlled absorption, scattering, and emission properties. As quantum dots become commercially available at large scale, the need for robust, stable, and flexible optical components continues to drive the development of robust and flexible quantum dot composite materials. In this review, after a thorough introduction to quantum dots, discussion delves into methods for fabricating quantum dot loaded composite optical elements such as thin films, microfabricated patterns, and microstructures. The importance of surface chemistry and ligand engineering, host matrixes, wet processing, and unique patterning methodologies is presented by considering photostability, aggregation, and phase separation of quantum dots in corresponding composites. With regard to prospective optical applications of quantum dot materials, emphasis is placed on light emitting and guiding composite materials for lasing applications, specifically whispering gallery mode‐based photonic microsystems. These developments will enable novel flexible, portable, and miniaturized optoelectronic devices such as light‐emitting diodes, flexible pixelated displays, solar cells, large‐area microwaveguides, omnidirectional micromirrors, optical metasurfaces, and directional microlasers.
- Award ID(s):
- 1810485
- NSF-PAR ID:
- 10282417
- Date Published:
- Journal Name:
- Materials Horizons
- Volume:
- 8
- Issue:
- 7
- ISSN:
- 2051-6347
- Page Range / eLocation ID:
- 2032 to 2040
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Abstract -
Abstract Although processing via external stimuli is a promising technique to tune the structure and properties of polymeric materials, the impact of magnetic fields on phase transitions in thermoresponsive polymer solutions is not well‐understood. As nanoparticle (NP) addition is also known to impact these thermodynamic and optical properties, synergistic effects from combining magnetic fields with NP incorporation provide a novel route for tuning material properties. Here, the thermodynamic, optical, and rheological properties of aqueous poly(
N ‐isopropyl acrylamide) (PNIPAM) solutions are examined in the presence of hydrophilic silica NPs and magnetic fields, individually and jointly, via Fourier‐transform infrared spectroscopy (FTIR), magneto‐turbidimetry, differential scanning calorimetry (DSC), and magneto‐rheology. While NPs and magnetic fields both reduce the phase separation energy barrier and lower optical transition temperatures by altering hydrogen bonding (H‐bonding), infrared spectra demonstrate that the mechanism by which these changes occur is distinct. Magnetic fields primarily alter solvent polarization while NPs provide PNIPAM–NP H‐bonding sites. Combining NP addition with field application uniquely alters the solution environment and results in field‐dependent rheological behavior that is unseen in polymer‐only solutions. These investigations provide fundamental understanding on the interplay of magnetic fields and NP addition on PNIPAM thermoresponsivity which can be harnessed for increasingly complex stimuli‐responsive materials. -
Abstract Both amorphous and crystalline silicon are ubiquitous materials for electronics, photonics, and microelectromechanical systems. On‐demand control of Si crystallinity is crucial for device manufacturing and to overcome the limitations of current phase‐change materials (PCM) in active photonics. Fast reversible phase transformation in silicon, however, has never been accomplished due to the notorious challenge of amorphization. It is demonstrated that nanostructured Si can function as a PCM, since it can be reversibly crystallized and amorphized under nanosecond laser irradiation with different pulse energies. Reflection probing on a single nanodisk's phase transformations confirms the distinct mechanisms for crystallization and amorphization. The experimental results show that the relaxation time of undercooled silicon at 950 K is 10 ns. The phase change provides a 20% nonvolatile reflectivity modulation within 100 ns and can be repeated over 400 times. It is shown that such transformations are free of deformation upon solidification. Based on the switchable photonic properties in the visible spectrum, proof‐of‐concept experiments of dielectric color displays and dynamic wavefront control are shown. Therefore, nanostructured silicon is proposed as a chemically stable, deformation free, and complementary metal–oxide‐semiconductor compatible (CMOS) PCM for active photonics at visible wavelengths.
-
Abstract Structural color filters have recently blossomed as a superior alternative to organic dyes or chemical pigments owing to their remarkable durability and compactness. With appropriate design, nanostructure‐induced photonic or plasmonic resonance modes can give rise to either enhancement in transmission or suppression in the reflection within specific wavelength ranges in the optical regime, generating distinctive colors. However, the static optical properties due to fixed structural geometry and size after fabrication hinder their deployment in many cutting‐edge technologies requiring adaptive complexion changes. Here, a multilayer thin film‐based color filter incorporating Mg and MgO, earth‐abundant and biodegradable materials, is devised. The devices display vivid hues spanning a broad gamut via the control of the film thickness. They also exhibit minimal color changes with varying angle views up to 40°–50°. Moreover, the tones fade away instantly upon immersion in water and then progressively transition to a different hue with the complete removal of the Mg‐containing layers, realizing transient color responses. This approach holds great promise for alternative pixels with irreversible color‐change capability as well as zero‐power consumption and low cost, while making use of biodegradable materials.
-
Flowers have evolved remarkable diversity in petal color, in large part due to pollinator-mediated selection. This diversity arises from specialized metabolic pathways that generate conspicuous pigments. Despite the clear link between flower color and floral pigment production, studies determining predictive relationships between pigmentation and petal color are currently lacking. In this study, we analyze a dataset consisting of hundreds of natural Penstemon hybrids that exhibit variation in flower color, including blue, purple, pink, and red. For each individual hybrid, we measured anthocyanin pigment content and petal spectral reflectance. We found that floral pigment quantities are correlated with hue, chroma, and brightness as calculated from petal spectral reflectance data: hue is related to the relative amounts of delphinidin vs. pelargonidin pigmentation, whereas brightness and chroma are correlated with the total anthocyanin pigmentation. We used a partial least squares regression approach to identify predictive relationships between pigment production and petal reflectance. We find that pigment quantity data provide robust predictions of petal reflectance, confirming a pervasive assumption that differences in pigmentation should predictably influence flower color. Moreover, we find that reflectance data enables accurate inferences of pigment quantities, where the full reflectance spectra provide much more accurate inference of pigment quantities than spectral attributes (brightness, chroma, and hue). Our predictive framework provides readily interpretable model coefficients relating spectral attributes of petal reflectance to underlying pigment quantities. These relationships represent key links between genetic changes affecting anthocyanin production and ecological functions of petal coloration.more » « less