Tris(2-(arylamido)-4,6-di- tert -butylphenoxo)molybdenum( vi ) complexes ( R ap) 3 Mo can be prepared either from (cycloheptatriene)Mo(CO) 3 and the N -aryliminoquinone, or from MoO 2 (acac) 2 and the aminophenol. In contrast to all other reported unconstrained transition metal tris(amidophenoxide) complexes, the molybdenum complexes show a facial geometry in the solid state. In solution, the fac isomer predominates, though a small amount of mer isomer is detectable at room temperature. At elevated temperature the two species interconvert through Rây-Dutt trigonal twists, which are faster than Bailar twists in this system, presumably because of steric effects of the N -aryl groups. Substituents on the N -aryl ring shift the fac / mer equilibrium of the complex, with more electron-withdrawing substituents generally increasing the proportion of the mer isomer. The preference for fac over mer geometry is thus suggested to be due to enhanced π bonding in the fac isomer. In contrast to analogous catecholate complexes, the tris(amidophenoxide) complexes are not Lewis acidic and are inert to nucleophilic oxidants such as amine- N -oxides.
more »
« less
η2 Coordination of Electron-Deficient Arenes with Group 6 Dearomatization Agents
The exceptionally π-basic metal fragments {MoTp(NO)(DMAP)} and {WTp(NO)(PMe3)} (Tp = tris(pyrazolyl)borate; DMAP = 4-(N,N-dimethylamino)pyridine) form thermally stable η2-coordinated complexes with a variety of electron-deficient arenes. The tolerance of substituted arenes with fluorine-containing electron withdrawing groups (EWG; −F, −CF3, −SF5) is examined for both the molybdenum and tungsten systems. When the EWG contains a π bond (nitriles, aldehydes, ketones, ester), η2 coordination occurs predominantly on the nonaromatic functional group. However, complexation of the tungsten complex with trimethyl orthobenzoate (PhC(OMe)3) followed by hydrolysis allows access to an η2-coordinated arene with an ester substituent. In general, the tungsten system tolerates sulfur-based withdrawing groups well (e.g., PhSO2Ph, MeSO2Ph), and the integration of multiple electron-withdrawing groups on a benzene ring further enhances the π-back-bonding interaction between the metal and aromatic ligand. While the molybdenum system did not form stable η2-arene complexes with the sulfones or ortho esters, it was capable of forming rare examples of stable η2-coordinated arene complexes with a range of fluorinated benzenes (e.g., fluorobenzene, difluorobenzenes). In contrast to what has been observed for the tungsten system, these complexes formed without interference of C–H or C–F insertion.
more »
« less
- Award ID(s):
- 1800051
- NSF-PAR ID:
- 10283143
- Date Published:
- Journal Name:
- Organometallics
- Volume:
- 39
- Issue:
- 13
- ISSN:
- 1520-6041
- Page Range / eLocation ID:
- 2493-2510
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The conformational preferences of 28 sterically and electronically diverse N-aryl amides were detd. using d. functional theory (DFT), using the B3LYP functional and 6-31G(d) basis set. For each compd., both the cis and trans conformers were optimized, and the difference in ground state energy calcd. For six of the compds., the potential energy surface was detd. as a function of rotation about the N-aryl bond (by 5° increments) for both cis and trans conformers. A natural bond orbital (NBO) deletion strategy was also employed to det. the extent of the contribution of conjugation to the energies of each of the conformers. By comparing these computational results with previously reported exptl. data, an explanation for the divergent conformational preferences of 2° N-aryl amides and 3° N-alkyl-N-aryl amides was formulated. This explanation accounts for the obsd. relationships of both steric and electronic factors detg. the geometry of the optimum conformation, and the magnitude of the energetic difference between cis and trans conformers: except under the most extreme scenarios, 2° amides maintain a trans conformation, and the N-bound arene lies in the same plane as the amide unless it has ortho substituents; for 3° N-alkyl-N-aryl amides in which the alkyl and aryl substituents are connected in a small ring, trans conformations are also favored, for most cases other than formamides, and the arene and amide remain in conjugation; and for 3° N-alkyl-N-aryl amides in which the alkyl and aryl substituents are not connected in a small ring, allylic strain between the two N-bound substituents forces the aryl substituent to rotate out of the plane of the amide, and the trans conformation is destabilized with respect to the cis conformation due to repulsion between the π system of the arene and the lone pairs on the oxygen atom of the carbonyl. The cis conformation is increasingly more stable than the trans conformation as electron d. is increased on the arene because the more electron-rich arenes adopt a more orthogonal arrangement, increasing the interaction with the carbonyl oxygen, while simultaneously increasing the magnitude of the repulsion due to the increased electron d. in the π system. The trans conformation is favored for 2° amides even when the arene is orthogonal to the amide, in nearly all cases, because the C-N-C bond angle can expend at the expense of the C-N-H bond angles, while this is not favorable for 3° amides.more » « less
-
The importance of electron deficient Tp ligands motivates the introduction of electron-withdrawing substituents into the scorpionate framework. Since perfluorophenyltris(pyrazol-1-yl)borate affects significant anodic shifts in half-cell potentials in their metal complexes relative those of phenyltris(pyrazol-1-yl)borate analogues, the tuning opportunities achieved using 3,4,5-trifluorophenyl- and 3,5-bis(trifluoromethyl)phenyl(pyrazol-1-yl)borates were explored. Bis(amino)boranes ((3,4,5-F)C 6 H 2 )B(NMe 2 ) 2 and ((3,5-CF 3 )C 6 H 3 )B(NMe 2 ) 2 are precursors to fluorinated tris(pyrazol-1-yl)phenylborates. Thallium salts of these scorpionates exhibit bridging asymmetric κ 3 - N , N , N coordination modes consistent with the reduced π-basicity of the fluorinated phenyl substituents relative those of other structurally characterized tris(pyrazol-1-yl)phenylborates. While a comparative analysis of the spectral and X-ray crystallographic data for classical Mo(0), Mo( ii ), Mn( i ), Fe( ii ) and Cu( ii ) complexes of [((3,4,5-F)C 6 H 2 )Bpz 3 ] − and [((3,5-CF 3 )C 6 H 3 )Bpz 3 ] − could not differentiate these ligands with respect to their metal-based electronic impacts, cyclic voltammetry suggests that 3,4,5-trifluorophenyl- and 3,5-bis(trifluoromethyl)phenyl(pyrazol-1-yl)borates affect similar anodic shifts within their metal complexes, with coordination of [((3,5-CF 3 )C 6 H 3 )Bpz 3 ] − rendering metal centers more difficult to oxidize, and sometimes even more difficult to oxidize than their [C 6 F 5 Bpz 3 ] − analogues. These data suggest that the extent of phenyl substituent fluorination necessary to minimize metal center electron-richness in phenyltris(pyrazol-1-yl)borate complexes cannot be confidently predicted.more » « less
-
more » « less
Neurotransmitters are small molecules involved in neuronal signaling and can also serve as stress biomarkers.1Their abnormal levels have been also proposed to be indicative of several neurological diseases such as Alzheimer’s disease, Parkinson’s disease, Huntington disease, among others. Hence, measuring their levels is highly important for early diagnosis, therapy, and disease prognosis. In this work, we investigate facile functionalization methods to tune and enhance sensitivity of printed graphene sensors to neurotransmitters. Sensors based on direct laser scribing and screen-printed graphene ink are studied. These printing methods offer ease of prototyping and scalable fabrication at low cost.
The effect of functionalization of laser induced graphene (LIG) by electrodeposition and solution-based deposition of TMDs (molybdenum disulfide2and tungsten disulfide) and metal nanoparticles is studied. For different processing methods, electrochemical characteristics (such as electrochemically active surface area: ECSA and heterogenous electron transfer rate: k0) are extracted and correlated to surface chemistry and defect density obtained respectively using X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. These functionalization methods are observed to directly impact the sensitivity and limit of detection (LOD) of the graphene sensors for the studied neurotransmitters. For example, as compared to bare LIG, it is observed that electrodeposition of MoS2on LIG improves ECSA by 3 times and k0by 1.5 times.3Electrodeposition of MoS2also significantly reduces LOD of serotonin and dopamine in saliva, enabling detection of their physiologically relevant concentrations (in pM-nM range). In addition, chemical treatment of LIG sensors is carried out in the form of acetic acid treatment. Acetic acid treatment has been shown previously to improve C-C bonds improving the conductivity of LIG sensors.4In our work, in particular, acetic acid treatment leads to larger improvement of LOD of norepinephrine compared to MoS2electrodeposition.
In addition, we investigate the effect of plasma treatment to tune the sensor response by modifying the defect density and chemistry. For example, we find that oxygen plasma treatment of screen-printed graphene ink greatly improves LOD of norepinephrine up to three orders of magnitude, which may be attributed to the increased defects and oxygen functional groups on the surface as evident by XPS measurements. Defects are known to play a key role in enhancing the sensitivity of 2D materials to surface interactions, and have been explored in tuning/enhancing the sensor sensitivity.5Building on our previous work,3we apply a custom machine learning-based data processing method to further improve that sensitivity and LOD, and also to automatically benchmark different molecule-material pairs.
Future work includes expanding the plasma chemistry and conditions, studying the effect of precursor mixture in laser-induced solution-based functionalization, and understanding the interplay between molecule-material system. Work is also underway to improve the machine learning model by using nonlinear learning models such as neural networks to improve the sensor sensitivity, selectivity, and robustness.
References A. J. Steckl, P. Ray, (2018), doi:10.1021/acssensors.8b00726.
Y. Lei, D. Butler, M. C. Lucking, F. Zhang, T. Xia, K. Fujisawa, T. Granzier-Nakajima, R. Cruz-Silva, M. Endo, H. Terrones, M. Terrones, A. Ebrahimi,
Sci. Adv. 6 , 4250–4257 (2020).V. Kammarchedu, D. Butler, A. Ebrahimi,
Anal. Chim. Acta .1232 , 340447 (2022).H. Yoon, J. Nah, H. Kim, S. Ko, M. Sharifuzzaman, S. C. Barman, X. Xuan, J. Kim, J. Y. Park,
Sensors Actuators B Chem. 311 , 127866 (2020).T. Wu, A. Alharbi, R. Kiani, D. Shahrjerdi,
Adv. Mater. 31 , 1–12 (2019). -
more » « less
Abstract The reactivity of phosphaalkynes, the isolobal and isoelectronic congeners to alkynes, with metal alkylidyne complexes is explored in this work. Treating the tungsten alkylidyne [
t BuOCO]W≡Ct Bu(THF)2(1 ) with phosphaalkyne (10 ) results in the formation of [O2C(t BuC=)W{η 2‐(P ,C )−P≡C−Ad}(THF)] (13‐ t BuTHF ) and [O2C(AdC=)W{η 2‐(P ,C )−P≡C−t Bu}(THF)] (13‐AdTHF ); derived from the formal reductive migratory insertion of the alkylidyne moiety into a W−Carenebond. Analogous to alkyne metathesis, a stable phosphametallacyclobutadiene complex [t BuOCO]W[κ 2‐C(t Bu)PC(Ad)] (14 ) forms upon loss of THF from the coordination sphere of either13‐ t BuTHF or13‐AdTHF . Remarkably, the C−C bonds reversibly form/cleave with the addition or removal of THF from the coordination sphere of the formal tungsten(VI) metal center, permitting unprecedented control over the transformation of a tetraanionic pincer to a trianionic pincer and back. Computational analysis offers thermodynamic and electronic reasoning for the reversible equilibrium between13‐ t Bu/AdTHF and14 .
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1021/acs.organomet.0c00277
