Abstract The southern Coast Mountain batholith was episodically active from Jurassic to Eocene time and experienced four distinct high magmatic flux events during that period. Similar episodicity has been recognized in arcs worldwide, yet the mechanism(s) driving such punctuated magmatic behavior are debated. This study uses zircon Hf and O isotopes, with whole-rock and mineral geochemistry, to track spatiotemporal changes in southern Coast Mountains batholith melt sources and to evaluate models of flare-up behavior and crust formation in Cordilleran arc systems. Zircon Hf isotope analysis yielded consistently primitive values, with all zircon grains recording initial εHf between +6 and +16. The majority (97%) of zircons analyzed yielded δ18O values between 4.2‰ and 6.5‰, and only five grains recorded values of up to 8.3‰. These isotopic results are interpreted to reflect magmatism dominated by mantle melting during all time periods and across all areas of the southern batholith, which argues against the periodic input of more melt-fertile crustal materials as the driver of episodic arc magmatism. They also indicate that limited crustal recycling is needed to produce the large volumes of continental crust generated in the batholith. Although the isotopic character of intrusions is relatively invariant through time, magmas emplaced during flare-ups record higher Sr/Y and La/Yb(N) and lower zircon Ti and Yb concentrations, which is consistent with melting in thickened crust with garnet present as a fractionating phase. Flare-ups are also temporally associated with periods when the southern Coast Mountains batholith both widens and advances inboard. We suggest that the landward shift of the arc into more fertile lithospheric mantle domains triggers voluminous magmatism and is accompanied by magmatic and/or tectonic thickening. Overall, these results demonstrate that the magmatic growth of Cordilleran arcs can be spatially and temporally complex without requiring variability in the contributions of crust and/or mantle to the batholith.
more »
« less
The causes of continental arc flare ups and drivers of episodic magmatic activity in Cordilleran orogenic systems
Continental arcs in Cordilleran orogenic systems display episodic changes in magma production rate, alternating between flare ups (70–90 km3 km 1 Myr 1) and lulls (< 20 km3 km 1 Myr 1) on timescales of tens of millions of years. Arc segments or individual magmatic suites may have even higher rates, up several 100 s of km3 km 1 Myr 1, during flare ups. These rates are largely determined by estimating volumes of arc crust, but do not reflect melt production from the mantle. The bulk of mantle-derived magmas are recycled back into the mantle by delamination of arc roots after differentiation in the deep crust. Mantle-derived melt production rates for continental arcs are estimated to be 140–215 km3 km 1 Myr 1 during flare ups and ≤ 15 km3 km 1 Myr 1 during lulls. Melt production rates averaged over multiple magmatic cycles are consistent with independent estimates for partial melting of the mantle wedge in subduction zones, however, the rates during flare ups and lulls are both anomalously high and anomalously low, respectively. The difference in mantle-derived melt production between flare ups and lulls is larger than predicted by petrologic and numerical models that explore the range of globally observed subduction parameters (e.g., convergence rate, height of the mantle wedge). This suggests that other processes are required to increase magmatism during flare ups and suppress magmatism during lulls. There are many viable explanations, but one possibility is that crystallized melts from the asthenospheric mantle wedge are temporarily stored in the deep lithosphere during lulls and then remobilized during flare ups. Basaltic melts may stall in the mantle lithosphere in inactive parts of the arc system, like the back-arc, refertilizing the mantle lithosphere and suppressing melt delivery to the lower crust. Subsequent landward arc migration (i.e., toward the interior of the continent) may encounter such refertilized mantle lithosphere magma source regions, contributing to magmatic activity during a flare up. A review of continental arcs globally suggests that flare ups commonly coincide with landward arc migration and that this migration may start tens of millions of years before the flare up occurs. The region of magmatic activity, or arc width, can also expand significantly during a flare up. Arc migration or expansion into different mantle source regions and across lithospheric and crustal boundaries can cause temporal shifts in the radiogenic isotopic composition of magmatism. In the absence of arc migration, temporal shifts are more muted. Isotopic studies of mantle xenoliths and exposures of deep arc crust suggest that that primary, mantle-derived magmas generated during flare ups reflect substantial contributions from the subcontinental mantle lithosphere. Arc migration may be caused by a variety of mechanisms, including slab anchoring or slab folding in the mantle transition zone that could generate changes in slab dip. Episodic slab shallowing is associated with many tectonic processes in Cordilleran orogenic systems, like alternations between shortening and extension in the upper plate. Studies of arc migration may help to link irregular magmatic production in continental arcs with geodynamic models for orogenic cyclicity.
more »
« less
- Award ID(s):
- 2020935
- PAR ID:
- 10284329
- Date Published:
- Journal Name:
- Lithos
- Volume:
- 398-399
- ISSN:
- 0290-3458
- Page Range / eLocation ID:
- 1-32
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Arc magmatism is thought to be driven by peridotite melting in the mantle wedge. Yet pyroxenites are ubiquitous in the melting region beneath magmatic arcs. Because they typically have lower solidi temperatures and higher melt productivities compared to peridotite, pyroxenites likely play a significant role in magma generation. Here, we use the Zn/Fe ratios of a global database of Pliocene–Holocene primitive arc magmas to show that, as the crustal thickness of the overlying plate increases, so does the proportion of pyroxenite-derived melts relative to peridotite-derived melts. In fact, at arcs with crustal thicknesses >40 km, the majority of magmas are sourced from pyroxenite. Major and trace element geochemistry of pyroxenite melts is consistent with derivation from mafic magmas frozen in the mantle en route to the surface. We hypothesize that, as the thickness of the continental crust increases, the mantle wedge is displaced toward higher pressures and cooler temperatures, thereby lowering the extent of peridotite melting and allowing magmas sourced from the pyroxeniteveined mantle to dominate the arc budget.more » « less
-
Abstract The thermal and compositional structure of arcs influence magmatic differentiation and lower-crustal foundering, two key processes impacting the evolution of the continental crust. Although many studies have proposed time scales of lithospheric recycling based on convective downwelling calculations, these models depend on the composition, density (ρ), and thermal structure of the lower crust and mantle, which are difficult to quantify in active continental arcs. Here, we constrained these properties for the Andean Northern Volcanic Zone using direct petrologic observations from a unique suite of lower-crust and mantle xenoliths from Mercaderes, Colombia. Chemical abrasion–isotope dilution–thermal ionization mass spectrometry (CA-ID-TIMS) U-Pb dates for zircons within the host tuff indicate the xenoliths erupted no earlier than 238 (±19) ka and thus capture a recent snapshot of the arc and subarc mantle. Equilibrium pressure-temperature (P-T) estimates for 81 xenoliths define three distinct thermal domains, interpreted as (1) a steep conductive geothermal gradient in the lower arc crust; (2) a convecting mantle wedge; and (3) cooled mantle in proximity to the subducting slab. Our results indicate the presence of an ~10–14-km-thick, high-density lithospheric root that is ~0.1 g/cm3 denser than the underlying mantle. Unlike records from exhumed paleoarcs, Rayleigh-Taylor instability calculations using our P-T-ρ constraints are unrealistically short for the northern Andes. We suggest the presence of partial melts in this hot arc root as a potential source of buoyancy preventing or significantly slowing down foundering.more » « less
-
Abstract Combined Hf-O isotopic analyses of zircons from tuffs and lavas within the Sierra Madre Occidental (SMO) silicic large igneous province are probes of petrogenetic processes in the lower and upper crust. Existing petrogenetic and tectonomagmatic models diverge, having either emphasized significant crustal reworking of hydrated continental lithosphere in an arc above the retreating Farallon slab or significant input of juvenile mantle melts through a slab window into an actively stretching continental lithosphere. New isotopic data are remarkably uniform within and between erupted units across the spatial and temporal extent of the SMO, consistent with homogeneous melt production and evolution. Isotopic values are consistent with enriched mantle magmas (80%) that assimilated Proterozoic paragneisses (~20%) from the lower crust. δ18Ozircon values are consistent with fractionation of mafic magma and not with assimilation of hydrothermally altered upper crust, suggesting that the silicic magmas evolved at depth. Isotopic data agree with previous interpretations where voluminous juvenile melts entered the lithosphere during the transition from a continental arc experiencing slab rollback (Late Eocene) to the arrival of a subducting slab window (Oligocene and Early Miocene) and failure of the upper plate leading to the opening of the Gulf of California (Late Miocene). An anomalously large heat flux and extension of the upper plate allow for the sustained fractionation of the voluminous SMO magmas and assimilation of the lower crust.more » « less
-
Abstract Low‐angle subduction has been shown to have a profound impact on subduction processes. However, the mechanisms that initiate, drive, and sustain flat‐slab subduction are debated. Within all subduction zone systems, metamorphic dehydration reactions within the down‐going slab have been hypothesized to produce seismicity, and to produce water that fluxes melting of the asthenospheric wedge leading to arc magmatism. In this work, we examine the role hydration plays in influencing slab buoyancy and the geometry of the downgoing oceanic plate. When water is introduced to the oceanic lithosphere, it is incorporated into hydrous phases, which results in lowered rock densities. The net effect of this process is an increase in the buoyancy of the downgoing oceanic lithosphere. To better understand the role of water in low‐angle subduction settings, we model flat‐slab subduction in Alaska, where the thickened oceanic lithosphere of the Yakutat oceanic plateau is subducting beneath the continental lithosphere. In this work, we calculate the thermal conditions and stable mineral assemblages in the slab crust and mantle in order to assess the role that water plays in altering the density of the subducting slab. Our slab density results show that a moderate amount of hydration (1–1.5 wt% H2O) in the subducting crust and upper lithospheric mantle reduces slab density by 0.5%–0.8% relative to an anhydrous slab, and is sufficient to maintain slab buoyancy to 300–400 km from the trench. These models show that water is a viable factor in influencing the subduction geometry in Alaska, and is likely important globally.more » « less
An official website of the United States government

