skip to main content

Attention:

The NSF Public Access Repository (NSF-PAR) system and access will be unavailable from 11:00 PM ET on Thursday, October 10 until 2:00 AM ET on Friday, October 11 due to maintenance. We apologize for the inconvenience.

Explore Research Products in the NSF-PAR

Title: Limits of Extramobile and Intramobile Motion of Cylindrical Developable Mechanisms
Abstract Mechanisms that can both deploy and provide motions to perform desired tasks offer a multifunctional advantage over traditional mechanisms. Developable mechanisms (DMs) are devices capable of conforming to a predetermined developable surface and deploying from that surface to achieve specific motions. This paper builds on the previously identified behaviors of extramobility and intramobility by introducing the terminology of extramobile and intramobile motions, which define the motion of developable mechanisms while interior and exterior to a developable surface. The limits of motion are identified using defined conditions. It is shown that the more difficult of these conditions to kinematically predict may be treated as a non-factor during the design of cylindrical developable mechanisms given certain assumptions. The impact of toggle positions for each case is discussed. Physical prototypes demonstrate the results.  more » « less
Award ID(s):
1663345
NSF-PAR ID:
10285011
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Journal of Mechanisms and Robotics
Volume:
13
Issue:
1
ISSN:
1942-4302
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ( , Proceedings of the 2020 International Design Engineering Conferences)
    null (Ed.)
    Abstract

    Mechanisms that can both deploy and perform desired tasks offer a multifunctional advantage over traditional mechanisms. Developable mechanisms (DMs) are devices capable of conforming to a predetermined developable surface and deploying from that surface to achieve specific motions. This paper presents new terminology that defines motion of developable mechanisms while interior and exterior to a developable surface. The limits of motion are identified using defined conditions, and it is shown that the more difficult of these conditions may be treated as a non-factor during the design of cylindrical developable mechanisms given certain assumptions.

     
    more » « less
  2. ; ; ; ; ( , Science Robotics)
    The trend toward smaller mechanism footprints and volumes, while maintaining the ability to perform complex tasks, presents the opportunity for exploration of hypercompact mechanical systems integrated with curved surfaces. Developable surfaces are shapes that a flat sheet can take without tearing or stretching, and they represent a wide range of manufactured surfaces. This work introduces “developable mechanisms” as devices that emerge from or conform to developable surfaces. They are made possible by aligning hinge axes with developable surface ruling lines to enable mobility. Because rigid-link motion depends on the relative orientation of hinge axes and not link geometry, links can take the shape of the corresponding developable surface. Mechanisms are classified by their associated surface type, and these relationships are defined and demonstrated by example. Developable mechanisms show promise for meeting unfilled needs using systems not previously envisioned. 
    more » « less
  3. ; ; ; ; ; ; ( , Journal of Mechanisms and Robotics)
    null (Ed.)
    Abstract We demonstrate analytically that it is possible to construct a developable mechanism on a cone that has rigid motion. We solve for the paths of rigid motion and analyze the properties of this motion. In particular, we provide an analytical method for predicting the behavior of the mechanism with respect to the conical surface. Moreover, we observe that the conical developable mechanisms specified in this article have motion paths that necessarily contain bifurcation points, which lead to an unbounded array of motion paths in the parameterization plane. 
    more » « less
  4. ; ; ; ; ; ; ( , Proceedings of the 2020 International Design Engineering Conferences)
    null (Ed.)
    Abstract

    We demonstrate analytically that it is possible to construct a developable mechanism on a cone that has rigid motion. We solve for the paths of rigid motion and analyze the properties of this motion. In particular, we provide an analytical method for predicting the behavior of the mechanism with respect to the conical surface. Moreover, we observe that the conical developable mechanisms specified in this paper have motion paths that necessarily contain bifurcation points which lead to an unbounded array of motion paths in the parameterization plane.

     
    more » « less
  5. ; ; ; ( , Proceedings of the 2020 International Design Engineering Conferences)
    null (Ed.)
    Abstract

    Cylindrical developable mechanisms are devices that conform to and emerge from a cylindrical surface. These mechanisms can be formed or cut from the cylinder wall itself. This paper presents a study on adapting traditional hinge options to achieve revolute motion in these mechanisms. A brief overview of options is given, including classical pin hinges, small-length flexural pivots, initially curved beams, and an adaptation of the membrane thickness-accommodation technique. Curved Lamina Emergent Torsional (LET) joints are then evaluated in detail, and a thin-walled modeling assumption is checked analytically and empirically. A small-scale cylindrical developable mechanism is then evaluated with Nitinol curved LET joints.

     
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email