skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Polymerization mechanisms initiated by spatio-temporally confined light
Abstract Ultrafast laser 3D lithography based on non-linear light–matter interactions, widely known as multi-photon lithography (MPL), offers unrivaled precision rapid prototyping and flexible additive manufacturing options. 3D printing equipment based on MPL is already commercially available, yet there is still no comprehensive understanding of factors determining spatial resolution, accuracy, fabrication throughput, repeatability, and standardized metrology methods for the accurate characterization of the produced 3D objects and their functionalities. The photoexcitation mechanisms, spatial-control or photo-modified volumes, and the variety of processable materials are topics actively investigated. The complexity of the research field is underlined by a limited understanding and fragmented knowledge of light-excitation and material response. Research to date has only provided case-specific findings on photoexcitation, chemical modification, and material characterization of the experimental data. In this review, we aim to provide a consistent and comprehensive summary of the existing literature on photopolymerization mechanisms under highly confined spatial and temporal conditions, where, besides the excitation and cross-linking, parameters such as diffusion, temperature accumulation, and the finite amount of monomer molecules start to become of critical importance. Key parameters such as photoexcitation, polymerization kinetics, and the properties of the additively manufactured materials at the nanoscale in 3D are examined, whereas, the perspectives for future research and as well as emerging applications are outlined.  more » « less
Award ID(s):
1905582
PAR ID:
10285653
Author(s) / Creator(s):
; ; ; ; ; ; ; ;
Date Published:
Journal Name:
Nanophotonics
Volume:
10
Issue:
4
ISSN:
2192-8606
Page Range / eLocation ID:
1211 to 1242
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Small Structures)
    1D organic metal halide hybrids (OMHHs) exhibit strongly anisotropic optical properties, highly efficient light emission, and large Stokes shift, holding promise for novel photodetection and lighting applications. However, the fundamental mechanisms governing their unique optical properties and in particular the impacts of surface effects are not understood. Herein, 1D C4N2H14PbBr4by polarization‐dependent time‐averaged and time‐resolved photoluminescence (TRPL) spectroscopy, as a function of photoexcitation energy, is investigated. Surprisingly, it is found that the emission under photoexcitation polarized parallel to the 1D metal halide chains can be either stronger or weaker than that under perpendicular polarization, depending on the excitation energy. The excitation‐energy‐dependent anisotropic emission is attributed to fast surface recombination, supported by first‐principles calculations of optical absorption in this material. The fast surface recombination is directly confirmed by TRPL measurements, when the excitation is polarized parallel to the chains. The comprehensive studies provide a more complete picture for a deeper understanding of the optical anisotropy in 1D OMHHs. 
    more » « less
  2. ; ; ; ; (, Royal Society of Chemistry)
    Laser based additive manufacturing (AM) methods, that incorporate a high-density laser to sinter, melt, or solidify the desired material, have developed into an ideal technology for the design and fabrication of robust and highly customizable functional devices which aim to address key challenges in the aerospace, biomedical, and defense sectors. Recent advancements in powder bed fusion (PBF) approaches, such as selective laser sintering (SLS) and melting (SLM) have significantly improved the range of printable materials, minimum feature size, and microstructure evolution, endowing precise control over the physical properties of the final printed part. Furthermore, studies on novel photoresist materials and laser scanning strategies used during multiphoton lithography (MPL) approaches indicated that nanoscale spatial resolution could be achieved, allowing for the design of intricate biomedical implants or smooth optical devices. This chapter focuses on an extensive review of current research being conducted on laser-based AM technologies highlighting the current compatible materials and applications of SLS, SLM, and MLP printed functional devices. Future perspectives and notable challenges of the laser-based AM technologies are discussed in detail with the purpose of identifying critical research areas for each methodology. 
    more » « less
  3. ; (, ASME SHTC 2022)
    Abstract Through years of development, we have successfully demonstrated 3D light field lithography with UV continuous light. We recently combined this approach with femtosecond laser sources as two-photon femtosecond 3D light lithography. It is found that consistent results can happen under limited conditions with this direct combination. Our theoretical analysis reported last year shows that the experimental difficulty can be attributed to digital micro-mirror devices (DMD) and microlens arrays (MLA) used in the current 3D light field projection. Though they can control the propagation directions and interact at designed 3D locations, rays from such a system diverge with respect to the propagation distance. As a result, 3D voxel intensity in the 3D projection changes as a function of the separation distance with respect to the MLA in the 3D projection. To solve this problem, we replace the combination of DMD and MLA with a phase-controlled spatial light modulator. With a lab-developed algorithm, a single femtosecond laser pulse can generate up to a million sub-rays through the phase-controlled spatial light modulator. These sub-rays with a precisely controlled propagation direction can intersect at designed 3D locations as voxels for 3D virtual object constructions. Moreover, these sub-rays have minimum divergence angles to ensure that the voxel intensities are maintained consistently at each 3D location. We also demonstrated that versatile 3D patterns could be generated with two-photon femtosecond 3D light field lithography based on this innovative approach. 
    more » « less
  4. ; ; ; ; ; ; (, Chemical Society Reviews)
    The piezo-phototronic effect (a coupling effect of piezoelectric, photoexcitation and semiconducting properties, coined in 2010) has been demonstrated to be an ingenious and robust strategy to manipulate optoelectronic processes by tuning the energy band structure and photoinduced carrier behavior. The piezo-phototronic effect exhibits great potential in improving the quantum yield efficiencies of optoelectronic materials and devices and thus could help increase the energy conversion efficiency, thus alleviating the energy shortage crisis. In this review, the fundamental principles and challenges of representative optoelectronic materials and devices are presented, including photocatalysts (converting solar energy into chemical energy), solar cells (generating electricity directly under light illumination), photodetectors (converting light into electrical signals) and light-emitting diodes (LEDs, converting electric current into emitted light signals). Importantly, the mechanisms of how the piezo-phototronic effect controls the optoelectronic processes and the recent progress and applications in the above-mentioned materials and devices are highlighted and summarized. Only photocatalysts, solar cells, photodetectors, and LEDs that display piezo-phototronic behavior are reviewed. Material and structural design, property characterization, theoretical simulation calculations, and mechanism analysis are then examined as strategies to further enhance the quantum yield efficiency of optoelectronic devices via the piezo-phototronic effect. This comprehensive overview will guide future fundamental and applied studies that capitalize on the piezo-phototronic effect for energy conversion and storage. 
    more » « less
  5. ; (, Micromachines)
    null (Ed.)
    This review surveys advances in the fabrication of functional microdevices by multi-photon lithography (MPL) using the SU-8 material system. Microdevices created by MPL in SU-8 have been key to progress in the fields of micro-fluidics, micro-electromechanical systems (MEMS), micro-robotics, and photonics. The review discusses components, properties, and processing of SU-8 within the context of MPL. Emphasis is focused on advances within the last five years, but the discussion also includes relevant developments outside this period in MPL and the processing of SU-8. Novel methods for improving resolution of MPL using SU-8 and discussed, along with methods for functionalizing structures after fabrication. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email