More Like this

1. Multidimensional visualization of the dynamic evolution of Li metal via in situ/operando methods

   https://doi.org/10.1073/pnas.2220419120  

   Lang, Shuangyan; Colletta, Michael; Krumov, Mihail R.; Seok, Jeesoo; Kourkoutis, Lena F.; Wen, Rui; Abruña, Héctor D. (February 2023, Proceedings of the National Academy of Sciences)

   The growing demands for high-energy density electrical energy storage devices stimulate the coupling of conversion-type cathodes and lithium (Li) metal anodes. While promising, the use of these “Li-free” cathodes brings new challenges to the Li anode interface, as Li needs to be dissolved first during cell operation. In this study, we have achieved a direct visualization and comprehensive analysis of the dynamic evolution of the Li interface. The critical metrics of the interfacial resistance, Li growth, and solid electrolyte interface (SEI) distribution during the initial dissolution/deposition processes were systematically investigated by employing multidimensional analysis methods. They include three-electrode impedance tests, in situ atomic force microscopy, scanning electrochemical microscopy, and cryogenic scanning transmission electron microscopy. The high-resolution imaging and real-time observations show that a loose, diffuse, and unevenly distributed SEI is formed during the initial dissolution process. This leads to the dramatically fast growth of Li during the subsequent deposition, deviating from Fick’s law, which exacerbates the interfacial impedance. The compactness of the interfacial structure and enrichment of electrolyte species at the surface during the initial deposition play critical roles in the long-term stability of Li anodes, as revealed by operando confocal Raman spectroscopic mapping. Our observations relate to ion transfer, morphological and structural evolution, and Li (de)solvation at Li interfaces, revealing the underlying pathways influenced by the initial dissolution process, which promotes a reconsideration of anode investigations and effective protection strategies. 

   more » « less
2. A BF ₃ ‐Doped MXene Dual‐Layer Interphase for a Reliable Lithium‐Metal Anode

   https://doi.org/10.1002/adma.202210111  

   Shang, Mingwei; Shovon, Osman Goni; Wong, Francis En; Niu, Junjie (February 2023, Advanced Materials)

   Abstract A dual‐layer interphase that consists of an in‐situ‐formed lithium carboxylate organic layer and a thin BF 3 ‐doped monolayer Ti 3 C 2 MXene on Li metal is reported. The honeycomb‐structured organic layer increases the wetting of electrolyte, leading to a thin solid electrolyte interface (SEI). While the BF 3 ‐doped monolayer MXene provides abundant active sites for lithium homogeneous nucleation and growth, resulting in about 50% reduced thickness of inorganic‐rich components among the SEI layer. A low overpotential of less than 30 mV over 1000 h cycling in symmetric cells is received. The functional BF 3  groups, along with the excellent electronic conductivity and smooth surface of the MXene, greatly reduce the lithium plating/stripping energy barrier, enabling a dendrite‐free lithium‐metal anode. The battery with this dual‐layer coated lithium metal as the anode displays greatly improved electrochemical performance. A high capacity‐retention of 175.4 mAh g −1 at 1.0 C is achieved after 350 cycles. In a pouch cell with a capacity of 475 mAh, the battery still exhibits a high discharge capacity of 165.6 mAh g −1 with a capacity retention of 90.2% after 200 cycles. In contrast to the fast capacity decay of pure Li metal, the battery using NCA as the cathode also displays excellent capacity retention in both coin and pouch cells. The dual‐layer modified surface provides an effective approach in stabilizing the Li‐metal anode. 

   more » « less
3. Natural protein as novel additive of a commercial electrolyte for Long-Cycling lithium metal batteries

   https://doi.org/10.1016/j.cej.2022.135283  

   Wang, Chenxu; Fu, Xuewei; Ying, Chunhua; Liu, Jin; Zhong, Wei-Hong (February 2022, Chemical engineering journal)

   Suffering from critical instability of lithium (Li) anode, the most commercial electrolytes, carbonate-ester electrolytes, have been restrictedly used in high-energy Li metal batteries (LMBs) despite of their broad implementation in lithium-ion batteries. Here, abundant, natural corn protein, zein, is exploited as a novel additive to stabilize Li anode and effectively prolong the cycling life of LMBs based on carbonate-ester electrolyte. It is discovered that the denatured zein is involved in the formation of solid electrolyte interphase (SEI), guides Li+ deposition and repairs the cracked SEI. In specific, the zein-rich SEI benefits the anion immobilization, enabling uniform Li+ deposition to diminish dendrite growth; the preferential zein-Li reaction effectively repairs the cracked SEI, protecting Li from parasite reactions. The resulting symmetrical Li cell exhibits a prolonged cycling life to over 350 h from <200 h for pristine cell at 1 mA cm􀀀 2 with a capacity of 1 mAh cm^ 2. Paired with LiFePO4 cathode, zein additive markedly improves the electrochemical performance including a higher capacity of 130.1 mAh g^ 1 and a higher capacity retention of ~ 80 % after 200 cycles at 1 C. This study demonstrates a natural protein to be an effective additive for the most commercial electrolytes for advancing performance of LMBs. 

   more » « less
4. Fluorinated ethylene carbonate as additive to glyme electrolytes for robust sodium solid electrolyte interface

   https://doi.org/10.1016/j.xcrp.2023.101356  

   Sarkar, Susmita; Lefler, Matthew J.; Vishnugopi, Bairav S.; Nuwayhid, R. Blake; Love, Corey T.; Carter, Rachel; Mukherjee, Partha P. (April 2023, Cell Reports Physical Science)

   The utilization of alkali metal anodes is hindered by an inherent instability in organic electrolytes. Sodium is of growing interest due to its high natural abundance, but the carbonate electrolytes popular in lithium systems cannot form a stable solid electrolyte interphase (SEI) with a sodium electrode. Using half-cell and symmetric-cell analysis, we identify specific glyme (chain ether) electrolytes that produce thin, predominantly inorganic SEI at the sodium metal interface, and we study the effect of ethylene carbonate and fluoroethylene carbonate (FEC) additives on the SEI formed in these systems via X-ray photoelectron spectroscopy. Through in situ optical microscopy, we observe the onset and growth of sodium dendrites in these electrolytes. We determine that the SEI formed by glyme alone may not support extensive or extreme cycling conditions, but the addition of FEC provides a more robust SEI to facilitate numerous consistent sodium plating and stripping cycles. 

   more » « less
5. Lithium-activated SnS–graphene alternating nanolayers enable dendrite-free cycling of thin sodium metal anodes in carbonate electrolyte

   https://doi.org/10.1039/d0ee02423f  

   Liu, Wei; Chen, Zidong; Zhang, Zheng; Jiang, Pingxian; Chen, Yungui; Paek, Eunsu; Wang, Yixian; Mitlin, David (January 2021, Energy & Environmental Science)

   null (Ed.)

   Sodium metal battery (SMB, NMB) anodes can become dendritic due to an electrochemically unstable native Na-based solid electrolyte interphase (SEI). Herein Li-ion activated tin sulfide graphene nanocomposite membrane (A-SnS–G) is employed as an artificial SEI layer, allowing cyclability of record-thin 100 μm Na metal foils. The thin Na metal is prepared by a self-designed metallurgical rolling protocol. A-SnS–G is initially placed onto the polypropylene (PP) separator but becomes in situ transferred onto the Na metal surface. Symmetric metal cells protected by A-SnS–G achieve low-overpotential extended high-rate cycling in a standard carbonate electrolyte (EC : DEC = 1 : 1, 5% FEC). Accumulated capacity of 1000 mA h cm −2 is obtained after 500 cycles at 4 mA cm −2 , with accumulated capacity-to-foil capacity (A/F) ratio of 90.9. This is among the most favorable cycle life, accumulated capacity, and anode utilization combinations reported. Protection by non-activated SnS–G membrane yields significantly worse cycling, albeit still superior to the baseline unprotected sodium. Post-mortem and dedicated light optical analysis indicate that metal swelling, dendrite growth and dead metal formation is extensive for the unprotected sample, but is suppressed with A-SnS–G. Per XPS, post-100 cycles near-surface structure of A-SnS–G is rich in metallic Sn alloys and inorganic carbonate salts. Even after 300 cycles, Li-based SEI components ROCO 2 -Li, Li 2 CO 3 and LiF are detected with A-SnS–G. As a proof of principle, an SMB with a high mass loading (6 mg cm −2 ) NVP cathode and a A-SnS–G protected anode delivered extended cyclability, achieving 74 mA h g −1 after 400 cycles at 0.4C. 

   more » « less