An official website of the United States government
We demonstrate calibration and operation of a single wavelength (660 nm) Mueller matrix ellipsometer in normal transmission configuration using dual continuously rotating anisotropic mirrors. The mirrors contain highly spatially coherent nanostructure slanted columnar titanium thin films deposited onto optically thick gold layers on glass substrates. Upon rotation around the mirror normal axis, sufficient modulation of the Stokes parameters of light reflected at oblique angle of incidence is achieved. Thereby, the mirrors can be used as a polarization state generator and polarization state analyzer in a generalized ellipsometry instrument. A Fourier expansion approach is found sufficient to render and calibrate the effects of the mirror rotations onto the polarized light train within the ellipsometer. The Mueller matrix elements of a set of anisotropic samples consisting of a linear polarizer and a linear retarder are measured and compared with model data, and very good agreement is observed.
more »
« less
Mueller matrix imaging microscope using dual continuously rotating anisotropic mirrors
We demonstrate calibration and operation of a Mueller matrix imaging microscope using dual continuously rotating anisotropic mirrors for polarization state generation and analysis. The mirrors contain highly spatially coherent nanostructure slanted columnar titanium thin films deposited onto optically thick titanium layers on quartz substrates. The first mirror acts as polarization state image generator and the second mirror acts as polarization state image detector. The instrument is calibrated using samples consisting of laterally homogeneous properties such as straight-through-air, a clear aperture linear polarizer, and a clear aperture linear retarder waveplate. Mueller matrix images are determined for spatially varying anisotropic samples consisting of a commercially available (Thorlabs) birefringent resolution target and a spatially patterned titanium slanted columnar thin film deposited onto a glass substrate. Calibration and operation are demonstrated at a single wavelength (530 nm) only, while, in principle, the instrument can operate regardless of wavelength. We refer to this imaging ellipsometry configuration as rotating-anisotropic-mirror-sample-rotating-anisotropic-mirror ellipsometry (RAM-S-RAM-E).
more »
« less
- Award ID(s):
- 1808715
- PAR ID:
- 10288705
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Optics Express
- Volume:
- 29
- Issue:
- 18
- ISSN:
- 1094-4087; OPEXFF
- Format(s):
- Medium: X Size: Article No. 28704
- Size(s):
- Article No. 28704
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Nanostructures represent a frontier where meticulous attention to the control and assessment of structural dimensions becomes a linchpin for their seamless integration into diverse technological applications. However, determining the critical dimensions and optical properties of nanostructures with precision still remains a challenging task. In this study, by using an integrative and comprehensive methodical series of studies, the evolution of the depolarization factors in the anisotropic Bruggeman effective medium approximation (AB‐EMA) is investigated. It is found that these anisotropic factors are extremely sensitive to the changes in critical dimensions of the nanostructure platforms. In order to perform a systematic characterization of these parameters, spatially coherent, highly‐ordered slanted nanocolumns are fabricated from zirconia, silicon, titanium, and permalloy on silicon substrates with varying column lengths using glancing angle deposition (GLAD). In tandem, broad‐spectral range Mueller matrix spectroscopic ellipsometry data, spanning from the near‐infrared to the vacuum UV (0.72–6.5 eV), is analyzed with a best‐match model approach based on the anisotropic Bruggeman effective medium theory. The anisotropic optical properties, including complex dielectric function, birefringence, and dichroism, are thereby extracted. Most notably, the research unveils a generalized, material‐independent inverse relationship between depolarization factors and column length. It is envisioned that the presented scaling rules will permit accurate prediction of optical properties of nanocolumnar thin films improving their integration and optimization for optoelectronic and photonic device applications. As an outlook, the highly porous nature and extreme birefringence properties of the fabricated columnar metamaterial platforms are further explored in the detection of nanoparticles from the cross‐polarized integrated spectral color variations.more » « less
-
Electron paramagnetic resonance of Cr3+ ions in β-Ga2O3 is investigated using terahertz spectroscopic ellipsometry under magnetic field sweeping, a technique that enables the polarization resolving capabilities of ellipsometry for magnetic resonance measurements. We employed a single-crystal chromium-doped β-Ga2O3 sample, grown by the Czochralski method, and performed ellipsometry measurements at magnetic field strengths ranging from 2 to 8 T, at frequencies from 82 to 125 and 190 to 230 GHz, and at a temperature of 15 K. Analysis of the frequency-field diagrams derived from all Mueller matrix elements allowed us to differentiate between the effects of electron spin Zeeman splitting and zero-field splitting and to accurately determine the anisotropic Zeeman splitting g-tensor and the zero-field splitting parameters. Our results confirm that Cr3+ ions predominantly substitute into octahedral gallium sites. Line shape analysis of Mueller matrix element spectra using the Bloch–Brillouin model provides the spin volume concentration of Cr3+ sites, showing very good agreement with results from chemical analysis by inductively coupled plasma-optical emission spectroscopy and suggesting minimal occupation of sites with inactive electron paramagnetic resonance. This study enhances our understanding of the magnetic and electronic properties of chromium-doped β-Ga2O3 and demonstrates the effectiveness of high-frequency/high-field electron paramagnetic resonance generalized spectroscopic ellipsometry for characterizing defects in ultrawide-bandgap semiconductors.more » « less
-
Tailoring optical and radiative properties has attracted significant attention recently due to its importance in advanced energy systems, nanophotonics, electro-optics, and nanomanufacturing. Metamaterials with micro- and nanostructures exhibit exotic radiative properties with tunability across the spectrum, direction, and polarization. Structures made from anisotropic or nanostructured materials have shown polarization-selective absorption bands in the mid-infrared. Characterizing the optical and radiative properties of such materials is crucial for both fundamental research and the development of practical applications. Mueller matrix ellipsometry offers a nondestructive and noninvasive technique for characterizing radiative properties. Although such ellipsometers have long been used to measure optical properties, their operational bandwidth is usually limited to the visible to near-infrared range, leaving the mid-infrared largely unexplored. In this work, a broadband mid-infrared ellipsometer, operating from 2 to 15 μm, is designed and constructed to measure 12 elements of the Mueller matrix. The results may be used to determine the full Mueller matrix under specific conditions. The performance of the ellipsometer is evaluated using nanostructured materials, including a 1D grating and a chiral F-shaped metasurface. The measurement results compared well to those obtained from rigorous-coupled-wave analysis and finite-difference time-domain simulations, suggesting that this setup offers a useful tool in optical property retrieval and the assessment of nanostructured materials.more » « less
-
Abstract Dielectric mirrors comprising thin‐film multilayers are widely used in optical experiments because they can achieve substantially higher reflectance compared to metal mirrors. Here, potential problems are investigated that can arise when dielectric mirrors are used at oblique incidence, in particular for focused beams. It is found that light beams reflected from dielectric mirrors can experience lateral beam shifts, beam‐shape distortion, and depolarization, and these effects have a strong dependence on wavelength, incident angle, and incident polarization. Because vendors of dielectric mirrors typically do not share the particular layer structure of their products, several dielectric‐mirror stacks are designed and simulated, and then the lateral beam shift from two commercial dielectric mirrors and one coated metal mirror is also measured. This paper brings awareness of the tradeoffs between dielectric mirrors and front‐surface metal mirrors in certain optics experiments, and it is suggested that vendors of dielectric mirrors provide information about beam shifts, distortion, and depolarization when their products are used at oblique incidence.more » « less
