skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: A technique for rapid source apportionment applied to ambient organic aerosol measurements from a thermal desorption aerosol gas chromatograph (TAG)
Abstract. We present a rapid method for apportioning the sources of atmospheric organic aerosol composition measured by gas chromatography–mass spectrometry methods. Here, we specifically apply this new analysis method to data acquired on a thermal desorption aerosol gas chromatograph (TAG) system. Gas chromatograms are divided by retention time into evenly spaced bins, within which the mass spectra are summed. A previous chromatogram binning method was introduced for the purpose of chromatogram structure deconvolution (e.g., major compound classes) (Zhang et al., 2014). Here we extend the method development for the specific purpose of determining aerosol samples' sources. Chromatogram bins are arranged into an input data matrix for positive matrix factorization (PMF), where the sample number is the row dimension and the mass-spectra-resolved eluting time intervals (bins) are the column dimension. Then two-dimensional PMF can effectively do three-dimensional factorization on the three-dimensional TAG mass spectra data. The retention time shift of the chromatogram is corrected by applying the median values of the different peaks' shifts. Bin width affects chemical resolution but does not affect PMF retrieval of the sources' time variations for low-factor solutions. A bin width smaller than the maximum retention shift among all samples requires retention time shift correction. A six-factor PMF comparison among aerosol mass spectrometry (AMS), TAG binning, and conventional TAG compound integration methods shows that the TAG binning method performs similarly to the integration method. However, the new binning method incorporates the entirety of the data set and requires significantly less pre-processing of the data than conventional single compound identification and integration. In addition, while a fraction of the most oxygenated aerosol does not elute through an underivatized TAG analysis, the TAG binning method does have the ability to achieve molecular level resolution on other bulk aerosol components commonly observed by the AMS.  more » « less
Award ID(s):
1437933 1554061
PAR ID:
10289035
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Atmospheric Measurement Techniques
Volume:
9
Issue:
11
ISSN:
1867-8548
Page Range / eLocation ID:
5637 to 5653
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. null (Ed.)
    Abstract. The chemical complexity of biomass burning organic aerosol (BBOA) greatlyincreases with photochemical aging in the atmosphere, necessitatingcontrolled laboratory studies to inform field observations. In theseexperiments, BBOA from American white oak (Quercus alba) leaf andheartwood samples was generated in a custom-built emissions and combustionchamber and photochemically aged in a potential aerosol mass (PAM) flowreactor. A thermal desorption aerosol gas chromatograph (TAG) was used inparallel with a high-resolution time-of-flight aerosol mass spectrometer(AMS) to analyze BBOA chemical composition at different levels ofphotochemical aging. Individual compounds were identified and integrated toobtain relative decay rates for key molecules. A recently developedchromatogram binning positive matrix factorization (PMF) technique was usedto obtain mass spectral profiles for factors in TAG BBOA chromatograms,improving analysis efficiency and providing a more complete determination ofunresolved complex mixture (UCM) components. Additionally, the recentlycharacterized TAG decomposition window was used to track molecular fragmentscreated by the decomposition of thermally labile BBOA during sampledesorption. We demonstrate that although most primary (freshly emitted) BBOAcompounds deplete with photochemical aging, certain components eluting withinthe TAG thermal decomposition window are instead enhanced. Specifically, theincreasing trend in the decomposition m∕z 44 signal (CO2+)indicates formation of secondary organic aerosol (SOA) in the PAM reactor.Sources of m∕z 60 (C2H4O2+), typically attributed tofreshly emitted BBOA in AMS field measurements, were also investigated. Fromthe TAG chemical speciation and decomposition window data, we observed adecrease in m∕z 60 with photochemical aging due to the decay ofanhydrosugars (including levoglucosan) and other compounds, as well as anincrease in m∕z 60 due to the formation of thermally labile organic acidswithin the PAM reactor, which decompose during TAG sample desorption. Whenaging both types of BBOA (leaf and heartwood), the AMS data exhibit acombination of these two contributing effects, causing limited change to theoverall m∕z 60 signal. Our observations demonstrate the importance ofchemically speciated data in fully understanding bulk aerosol measurementsprovided by the AMS in both laboratory and field studies. 
    more » « less
  2. Abstract. Organic nitrate (RONO2) formation in the atmosphere represents a sink of NOx(NOx = NO + NO2) and termination of the NOx/HOx(HOx = HO2 + OH) ozone formation and radical propagation cycles, can act as a NOx reservoirtransporting reactive nitrogen, and contributes to secondary organic aerosol formation. While some fraction of RONO2 is thought to reside in the particle phase, particle-phase organic nitrates (pRONO2) are infrequently measured and thus poorly understood. There is anincreasing prevalence of aerosol mass spectrometer (AMS) instruments, which have shown promise for determining the quantitative total organic nitratefunctional group contribution to aerosols. A simple approach that relies on the relative intensities of NO+ and NO2+ ions inthe AMS spectrum, the calibrated NOx+ ratio for NH4NO3, and the inferred ratio for pRONO2 hasbeen proposed as a way to apportion the total nitrate signal to NH4NO3 and pRONO2. This method is increasingly beingapplied to field and laboratory data. However, the methods applied have been largely inconsistent and poorly characterized, and, therefore, adetailed evaluation is timely. Here, we compile an extensive survey of NOx+ ratios measured for variouspRONO2 compounds and mixtures from multiple AMS instruments, groups, and laboratory and field measurements. All data and analysispresented here are for use with the standard AMS vaporizer. We show that, in the absence of pRONO2 standards, thepRONO2 NOx+ ratio can be estimated using a ratio referenced to the calibrated NH4NO3 ratio, aso-called “Ratio-of-Ratios” method (RoR = 2.75 ± 0.41). We systematically explore the basis for quantifyingpRONO2 (and NH4NO3) with the RoR method using ground and aircraft field measurements conducted over a largerange of conditions. The method is compared to another AMS method (positive matrix factorization, PMF) and other pRONO2 andrelated (e.g., total gas + particle RONO2) measurements, generally showing good agreement/correlation. A broad survey of ground andaircraft AMS measurements shows a pervasive trend of higher fractional contribution of pRONO2 to total nitrate with lower totalnitrate concentrations, which generally corresponds to shifts from urban-influenced to rural/remote regions. Compared to ground campaigns,observations from all aircraft campaigns showed substantially lower pRONO2 contributions at midranges of total nitrate(0.01–0.1 up to 2–5 µg m−3), suggesting that the balance of effects controlling NH4NO3 and pRONO2formation and lifetimes – such as higher humidity, lower temperatures, greater dilution, different sources, higher particle acidity, andpRONO2 hydrolysis (possibly accelerated by particle acidity) – favors lower pRONO2 contributions for thoseenvironments and altitudes sampled. 
    more » « less
  3. Abstract. Obtaining quantitative information for molecular species present in aerosols from real-time mass spectrometers such as an extractive electrospray time-of-flight mass spectrometer (EESI) and an aerosol mass spectrometer (AMS) can be challenging. Typically, molecular species are calibrated directly through the use of pure standards. However, in some cases (e.g., secondary organic aerosol (SOA) formed from volatile organic compounds (VOCs)), direct calibrations are impossible, as many SOA species can either not be purchased as pure standards or have ambiguous molecular identities. In some cases, bulk OA sensitivities are used to estimate molecular sensitivities. This approach is not sufficient for EESI, which measures molecular components of OA, because different species can have sensitivities that vary by a factor of more than 30. Here, we introduce a method to obtain EESI calibration factors when standards are not available, and we provide a thorough analysis of the feasibility, performance, and limitations of this new technique. In this method, complex aerosol mixtures were separated with high-performance liquid chromatography (HPLC) followed by aerosol formation via atomization. The separated aerosols were then measured by an EESI and an AMS, which allowed us to obtain sensitivities for some species present in standard and SOA mixtures. Pure compounds were used to test the method and characterize its uncertainties, and obtained sensitivities were consistent within ±20 % when comparing direct calibrations vs. HPLC calibrations for a pure standard and within a factor of 2 for a standard mixture. In some cases, species were not completely resolved by chromatography, and positive matrix factorization (PMF) of AMS data enabled further separation. This method should be applicable to other real-time MS techniques. Improvements in chromatography are possible that would allow better separation in complex mixtures. 
    more » « less
  4. Abstract. Delhi, India, experiences extremely high concentrations ofprimary organic aerosol (POA). Few prior source apportionment studies onDelhi have captured the influence of biomass burning organic aerosol (BBOA) and cooking organic aerosol(COA) on POA. In a companion paper, we develop a new method to conductsource apportionment resolved by time of day using the underlying approachof positive matrix factorization (PMF). We call this approach “time-of-dayPMF” and statistically demonstrate the improvements of this approach overtraditional PMF. Here, we quantify the contributions of BBOA, COA, andhydrocarbon-like organic aerosol (HOA) by applying positive matrixfactorization (PMF) resolved by time of day on two seasons (winter andmonsoon seasons of 2017) using organic aerosol measurements from an aerosol chemicalspeciation monitor (ACSM). We deploy the EPA PMF tool with the underlyingMultilinear Engine (ME-2) as the PMF solver. We also conduct detaileduncertainty analysis for statistical validation of our results. HOA is a major constituent of POA in both winter and the monsoon. In addition toHOA, COA is found to be a major constituent of POA in the monsoon, and BBOA isfound to be a major constituent of POA in the winter. Neither COA nor thedifferent types of BBOA were resolved in the seasonal (not time-resolved)analysis. The COA mass spectra (MS) profiles are consistent with massspectral profiles from Delhi and around the world, particularly resemblingMS of heated cooking oils with a high m/z 41. The BBOA MS have a very prominentm/z 29 in addition to the characteristic peak at m/z 60, consistent with previousMS observed in Delhi and from wood burning sources. In addition toseparating the POA, our technique also captures changes in MS profiles withthe time of day, a unique feature among source apportionment approachesavailable. In addition to the primary factors, we separate two to three oxygenated organicaerosol (OOA)components. When all factors are recombined to total POA and OOA, ourresults are consistent with seasonal PMF analysis conducted using EPA PMF.Results from this work can be used to better design policies that targetrelevant primary sources of organic aerosols in Delhi. 
    more » « less
  5. Abstract. Delhi, India, is the second most populated city in the world and routinely experiences some of the highest particulate matter concentrations of any megacity on the planet, posing acute challenges to public health (World Health Organization, 2018). However, the current understanding of the sources and dynamics of PM pollution in Delhi is limited. Measurements at the Delhi Aerosol Supersite (DAS) provide long-term chemical characterization of ambient submicron aerosol in Delhi, with near-continuous online measurements of aerosol composition. Here we report on source apportionment based on positive matrix factorization (PMF), conducted on 15 months of highly time-resolved speciated submicron non-refractory PM1 (NR-PM1) between January 2017 and March 2018. We report on seasonal variability across four seasons of 2017 and interannual variability using data from the two winters and springs of 2017 and 2018. We show that a modified tracer-based organic component analysis provides an opportunity for a real-time source apportionment approach for organics in Delhi. Phase equilibrium modeling of aerosols using the extended aerosol inorganics model (E-AIM) predicts equilibrium gas-phase concentrations and allows evaluation of the importance of the ventilation coefficient (VC) and temperature in controlling primary and secondary organic aerosol. We also find that primary aerosol dominates severe air pollution episodes, and secondary aerosol dominates seasonal averages. 
    more » « less