skip to main content


Title: Electronically reconfigurable complex oxide heterostructure freestanding membranes
In recent years, lanthanum aluminate/strontium titanate (LAO/STO) heterointerfaces have been used to create a growing family of nanoelectronic devices based on nanoscale control of LAO/STO metal-to-insulator transition. The properties of these devices are wide-ranging, but they are restricted by nature of the underlying thick STO substrate. Here, single-crystal freestanding membranes based on LAO/STO heterostructures were fabricated, which can be directly integrated with other materials via van der Waals stacking. The key properties of LAO/STO are preserved when LAO/STO membranes are formed. Conductive atomic force microscope lithography is shown to successfully create reversible patterns of nanoscale conducting regions, which survive to millikelvin temperatures. The ability to form reconfigurable conducting nanostructures on LAO/STO membranes opens opportunities to integrate a variety of nanoelectronics with silicon-based architectures and flexible, magnetic, or superconducting materials.  more » « less
Award ID(s):
1913034
NSF-PAR ID:
10292321
Author(s) / Creator(s):
; ; ; ; ; ; ; ; ;
Date Published:
Journal Name:
Science Advances
Volume:
7
Issue:
33
ISSN:
2375-2548
Page Range / eLocation ID:
eabh1284
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Strongly correlated electronic systems exhibit a wealth of unconventional behavior stemming from strong electron-electron interactions. The LaAlO3/SrTiO3(LAO/STO) heterostructure supports rich and varied low-temperature transport characteristics including low-density superconductivity, and electron pairing without superconductivity for which the microscopic origins is still not understood. LAO/STO also exhibits inexplicable signatures of electronic nematicity via nonlinear and anomalous Hall effects. Nanoscale control over the conductivity of the LAO/STO interface enables mesoscopic experiments that can probe these effects and address their microscopic origins. Here we report a direct correlation between electron pairing without superconductivity, anomalous Hall effect and electronic nematicity in quasi-1D ballistic nanoscale LAO/STO Hall crosses. The characteristic magnetic field at which the Hall coefficient changes directly coincides with the depairing of non-superconducting pairs showing a strong correlation between the two distinct phenomena. Angle-dependent Hall measurements further reveal an onset of electronic nematicity that again coincides with the electron pairing transition, unveiling a rotational symmetry breaking due to the transition from paired to unpaired phases at the interface. The results presented here highlights the influence of preformed electron pairs on the transport properties of LAO/STO and provide evidence of the elusive pairing “glue” that gives rise to electron pairing in SrTiO3-based systems.

     
    more » « less
  2. Abstract

    The ability to combine continuously tunable narrow-band terahertz (THz) generation that can access both the far-infrared and mid-infrared regimes with nanometer-scale spatial resolution is highly promising for identifying underlying light-matter interactions and realizing selective control of rotational or vibrational resonances in nanoparticles or molecules. Here, we report selective difference frequency generation with over 100 THz bandwidth via femtosecond optical pulse shaping. The THz emission is generated at nanoscale junctions at the interface of LaAlO3/SrTiO3(LAO/STO) that is defined by conductive atomic force microscope lithography, with the potential to perform THz spectroscopy on individual nanoparticles or molecules. Numerical simulation of the time-domain signal facilitates the identification of components that contribute to the THz generation. This ultra-wide-bandwidth tunable nanoscale coherent THz source transforms the LAO/STO interface into a promising platform for integrated lab-on-chip optoelectronic devices with various functionalities.

     
    more » « less
  3. Abstract

    Developing cost effective electrocatalysts with high oxygen evolution reaction (OER) activity is essential for large‐scale application of many electrochemical energy systems. Although the impacts of either lattice strain or oxygen defects on the OER performance of oxide catalysts have been extensively investigated, the effects of both factors are normally treated separately. In this work, the coupled effects of both strain and oxygen deficiency on the electrocatalytic activity of La0.7Sr0.3CoO3−δ(LSC) thin films grown on single crystal substrates (LaAlO3 (LAO) and SrTiO3 (STO)) are investigated. Electrochemical tests show that the OER activities of LSC films are higher under compression than under tension, and are diminished as oxygen vacancies are introduced by vacuum annealing. Both experimental and computational results indicate that the LSC films under tension (e.g., LSC/STO) have larger oxygen deficiency than the films under compression (e.g., LSC/LAO), which attribute to smaller oxygen vacancy formation energy. Such strain‐induced excessive oxygen vacancies in the LSC/STO increases theegstate occupancy and enlarges the energy gap between the O 2p and Co 3d band, resulting in lower OER activity. Understanding the critical role of strain–defect coupling is important for achieving the rational design of highly active and durable catalysts for energy devices.

     
    more » « less
  4. Abstract

    To satisfy continual demands for higher performance dielectrics in multi‐layer ceramic capacitors and related microelectronic devices, novel characterization methods are necessary for mapping materials properties down to the nanoscale, where enabling materials developments are increasingly relevant. Accordingly, an atomic force microscopy‐based approach is implemented for characterizing insulator performance based on the mapping of discharging dynamics. Following surface charging by biasing a conducting tip contacting a dielectric surface, consecutive non‐contact Kelvin force surface potential mapping (KPFM) reveals charge dissipation via exponential decay. In barium titanate (BTO) thin films engineered with distinct microstructures but identical thicknesses, discharging rates vary by up to a factor of 2, with smaller grain size correlating to longer dissipation times, providing insight into optimal microstructures for improved capacitor performance. High‐resolution potential mapping as a function of time thereby provides a route for directly investigating charge injection and discharging mechanisms in dielectrics, which are increasingly engineered down to the nanoscale and have global implications given the trillions of such devices manufactured each year.

     
    more » « less
  5. Abstract

    The electronic structure of the two‐dimensional electron system (2DES) found at the Al/SrTiO3(Al/STO) and LaAlO3/SrTiO3(LAO/STO) interfaces is measured by means of laser angle resolved photoemission spectroscopy, taking advantage of the large photoelectron escape depth at low photon energy to probe these buried interfaces. The possibility of tuning the electronic density in Al/STO by varying the Al layer thickness is demonstrated, and it is shown that the electronic structure evolution is well described by self‐consistent tight binding supercell calculations, but differs qualitatively from a rigid band shift model. It is shown that both 2DES are strongly coupled to longitudinal optical phonons, in agreement with previous reports of a polaronic ground state in similar STO based 2DESs. Tuning the electronic density in Al/STO to match that of LAO/STO and comparing both systems, it is estimated that the intrinsic LAO/STO 2DES has a bare band width of ≈60 meV and a carrier density of ≈6 × 1013cm−2.

     
    more » « less