A century of intermittent eco‐evolutionary feedbacks resulted in novel trait combinations in invasive Great Lakes alewives ( Alosa pseudoharengus )

Smith, Shelby E.; Palkovacs, Eric P.; Weidel, Brian C.; Bunnell, David B.; Jones, Andrew W.; Bloom, Devin D.

doi:10.1111/eva.13063

In this study, we investigate in situ etching of β-Ga2O3 in a metalorganic chemical vapor deposition system using tert-butyl chloride (TBCl). We report etching of both heteroepitaxial 2¯01-oriented and homoepitaxial (010)-oriented β-Ga2O3 films over a wide range of substrate temperatures, TBCl molar flows, and reactor pressures. We infer that the likely etchant is HCl (g), formed by the pyrolysis of TBCl in the hydrodynamic boundary layer above the substrate. The temperature dependence of the etch rate reveals two distinct regimes characterized by markedly different apparent activation energies. The extracted apparent activation energies suggest that at temperatures below ∼800 °C, the etch rate is likely limited by desorption of etch products. The relative etch rates of heteroepitaxial 2¯01 and homoepitaxial (010) β-Ga2O3 were observed to scale by the ratio of the surface energies, indicating an anisotropic etch. Relatively smooth post-etch surface morphology was achieved by tuning the etching parameters for (010) homoepitaxial films.

More Like this