An official website of the United States government
Many Alaska communities rely on heating oil for heat and diesel fuel for electricity. For remote communities, fuel must be barged or flown in, leading to high costs. While renewable energy resources may be available, the variability of wind and solar energy limits the amount that can be used coincidentally without adequate storage. This study developed a decision-making method to evaluate beneficial matches between excess renewable generation and non-electric dispatchable loads, specifically heat loads such as space heating, water heating and treatment, and clothes drying in three partner communities. Hybrid Optimization Model for Multiple Electric Renewables (HOMER) Pro was used to model potential excess renewable generation based on current generation infrastructure, renewable resource data, and community load. The method then used these excess generation profiles to quantify how closely they align with modeled or actual heat loads, which have inherent thermal storage capacity. Of 236 possible combinations of solar and wind capacity investigated in the three communities, the best matches were seen between excess electricity from high-penetration wind generation and heat loads for clothes drying and space heating. The worst matches from this study were from low penetrations of solar (25% of peak load) with all heat loads.
more »
« less
Development of a Tool for Optimizing Solar and Battery Storage for Container Farming in a Remote Arctic Microgrid
High transportation costs make energy and food expensive in remote communities worldwide, especially in high-latitude Arctic climates. Past attempts to grow food indoors in these remote areas have proven uneconomical due to the need for expensive imported diesel for heating and electricity. This study aims to determine whether solar photovoltaic (PV) electricity can be used affordably to power container farms integrated with a remote Arctic community microgrid. A mixed-integer linear optimization model (FEWMORE: Food–Energy–Water Microgrid Optimization with Renewable Energy) has been developed to minimize the capital and maintenance costs of installing solar photovoltaics (PV) plus electricity storage and the operational costs of purchasing electricity from the community microgrid to power a container farm. FEWMORE expands upon previous models by simulating demand-side management of container farm loads. Its results are compared with those of another model (HOMER) for a test case. FEWMORE determined that 17 kW of solar PV was optimal to power the farm loads, resulting in a total annual cost decline of ~14% compared with a container farm currently operating in the Yukon. Managing specific loads appropriately can reduce total costs by ~18%. Thus, even in an Arctic climate, where the solar PV system supplies only ~7% of total load during the winter and ~25% of the load during the entire year, investing in solar PV reduces costs.
more »
« less
- Award ID(s):
- 1740075
- PAR ID:
- 10294816
- Date Published:
- Journal Name:
- Energies
- Volume:
- 13
- Issue:
- 19
- ISSN:
- 1996-1073
- Page Range / eLocation ID:
- 5143
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
As an alternative, cleaner energy source, solar power is becoming a much bigger player in how electricity is generated and consumed. To assess how economically-viable solar power is in comparison to other forms of electricity, factors such as the return on investment (ROI) can be calculated. In addition, based on the average lifetime of an average photovoltaic (PV) system, energy purchase reduction, and revenue that can be generated by selling excess electricity back to the power grid, the economic viability of solar energy can be determined. The capital and commissioning cost of a PV system will continue to be a major factor in how viable a PV system will be. Thus, observing the trend in PV system costs over the past years will yield a point of grid parity, when solar becomes competitive with existing forms of energy generation, and show the most beneficial time frame for the customer to install the PV system. This paper seeks to provide some insight on how economic using solar energy can be.more » « less
-
Those who rely on electricity-dependent durable medical equipment (DME) often struggle to use their medical devices during prolonged power outages. With the increasing frequency of natural disasters and the growing use of electricity-dependent home medical devices, in addition to the continued integration of home-level renewable energy and mobile storage systems such as electric vehicles with vehicle-to-home (V2H) capabilities, home energy management systems (HEMS) must prioritize life-essential medical loads during extended power outages. This work integrates electricity-dependent DME into home energy management optimization. An oxygen concentrator and a hemodialysis machine are used as examples of medical devices with high power demands and distinct usage patterns. The HEMS model is formulated as a mixed-integer linear program (MILP) to minimize the total weighted load curtailment and thermal discomfort during extended outage scenarios. The results demonstrate that the HEMS is effective in sustaining DME operation.more » « less
-
Microgrid is a small-scale grid where generation is close to the demand allowing more penetration of renewables, like photovoltaic (PV). However, the intermittent nature of PV power generation poses a significant challenge in microgrid operation, especially on days with highly variable weather conditions. In this paper, a deep reinforcement Q-learning long short-term memory (QLSTM) model is developed to predict the operation strategy of a microgrid for the next day at a 15-minute time interval. To address the uncertainty of PV power and demand, the previous three days’ PV and load data are added as inputs to the model since weather conditions on consecutive days may depend on similar atmospheric conditions. Also, to address the effect of propagation of error in the long forecasting horizon with multiple steps, a moving window training method is implemented. The moving window will be shifted by 15 minutes at each step once the actual PV and load data are available till the end of the day. The model is tested in a microgrid consisting of combined cooling, heating and power, heat pump, PV, battery, and heating and cooling energy storage systems. Results show that our model outperforms gated recurrent unit, LSTM, and Q-learning for testing data from different months. Also, it shows better performance than MATLAB 2023 Optimization Toolbox (the branch-and-bound method) which uses forecasted data, especially on a day with highly variable weather conditions.more » « less
-
In this paper, a microgrid scenario composed by a PV generator, a battery system and residential loads in a power Hardware-in-the-Loop (HIL) platform is developed and tested. The electrical structure of the system, the component software modelling and hardware implementation are described. This paper proposes an EMS for microgrid power balance and execution of Time of Use (TOU) and load shedding Demand Response (DR) functions. Experimental results of each component of the scenario are shown.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/en13195143
