Recent channel state information (CSI)-based positioning pipelines rely on deep neural networks (DNNs) in order to learn a mapping from estimated CSI to position. Since real-world communication transceivers suffer from hardware impairments, CSI-based positioning systems typically rely on features that are designed by hand. In this paper, we propose a CSI-based positioning pipeline that directly takes raw CSI measurements and learns features using a structured DNN in order to generate probability maps describing the likelihood of the transmitter being at pre-defined grid points. To further improve the positioning accuracy of moving user equipments, we propose to fuse a time-series of learned CSI features or a time-series of probability maps. To demonstrate the efficacy of our methods, we perform experiments with real-world indoor line-of-sight (LoS) and nonLoS channel measurements. We show that CSI feature learning and time-series fusion can reduce the mean distance error by up to 2.5× compared to the state-of-the-art.
more »
« less
CSI-Based Multi-Antenna and Multi-Point Indoor Positioning Using Probability Fusion
Channel state information (CSI)-based fingerprinting via neural networks (NNs) is a promising approach to enable accurate indoor and outdoor positioning of user equipments (UEs), even under challenging propagation conditions. In this paper, we propose a positioning pipeline for wireless LAN MIMO-OFDM systems which uses uplink CSI measurements obtained from one or more unsynchronized access points (APs). For each AP receiver, novel features are first extracted from the CSI that are robust to system impairments arising in real-world transceivers. These features are the inputs to a NN that extracts a probability map indicating the likelihood of a UE being at a given grid point.
The NN output is then fused across multiple APs to provide a final position estimate. We provide experimental results with real-world indoor measurements under line-of-sight (LoS) and non-LoS propagation conditions for an 80 MHz bandwidth IEEE 802.11ac
system using a two-antenna transmit UE and two AP receivers each with four antennas. Our approach is shown to achieve centimeter-level median distance error, an order of magnitude improvement over a conventional baseline.
more »
« less
- NSF-PAR ID:
- 10295785
- Date Published:
- Journal Name:
- IEEE Transactions on Wireless Communications
- ISSN:
- 1536-1276
- Page Range / eLocation ID:
- 1 to 1
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
mmWave communication in 60GHz band has been recognized as an emerging technology to support various bandwidth-hungry applications in indoor scenarios. To maintain ultra-high throughputs while addressing potential blockage problems for mmWave signals, maintaining line-of-sight (LoS) communications between client devices and access points (APs) is critical. To maximize LoS communications, one approach is to deploy multiple APs in the same room. In this paper, we investigate the optimal placement of multiple APs using both analytical methods and simulations. Considering the uncertainty of obstacles and clients, we focus on two typical indoor settings: random-obstacle-random-client (RORC) scenarios and fixed-obstacle-random-client (FORC) scenarios. In the first case, we analytically derive the optimal positions of APs by solving a thinnest covering problem. This analytical result is used to show that deploying up to 5 APs in a specific room brings substantial performance gains. For the FORC scenario, we propose the shadowing-elimination search (SES) algorithm based on an analytic model to efficiently determine the placement of APs. We show, through simulations, that with only a few APs, the network can achieve blockage-free operation in the presence of multiple obstacles and also demonstrate that the algorithm produces near-optimal deployments. Finally, we perform ns-3 simulations based on the IEEE 802.11ad protocol at mmWave frequency to validate our analytical results. The ns-3 results show that proposed multi-AP deployments produce significantly higher aggregate performance as compared to other common AP placements in indoor scenarios.more » « less
-
Indoor positioning systems (IPSes) can enable many location-based services in large indoor venues where GPS signals are unavailable or unreliable. Among the most viable types of IPSes, RSS-IPSes rely on ubiquitous smartphones and indoor WiFi infrastructures and explore distinguishable received signal strength (RSS) measurements at different indoor locations as their location fingerprints. RSS-IPSes are unfortunately vulnerable to physical-layer RSS attacks that cannot be thwarted by conventional cryptographic techniques. Existing defenses against RSS attacks are all subject to an inherent tradeoff between indoor positioning accuracy and attack resilience. This paper presents the design and evaluation of MV-IPS, a novel RSS-IPS based on weighted multi-voting, which does not suffer from this tradeoff. In MV-IPS, every WiFi access point (AP) that receives a user’s RSS measurement gives a weighted vote for every reference location, and the reference location that receives the highest accumulative votes from all APs is output as the user’s most likely position. Trace-driven simulation studies based on real RSS measurements demonstrate that MV-IPS can achieve much higher positioning accuracy than prior solutions no matter whether RSS attacks are present.more » « less
-
Millimeter-wave communication is a highly promising technology to deliver multi-gigabit-per-second transmission rates for next-generation wireless LANs (WLANs). To achieve such ultra-high throughput performance in indoor scenarios, line-of-sight (LoS) connectivity becomes a critical requirement. Prior work has proposed access point (AP) mobility as an approach to improve LoS conditions and, thereby, approach optimum mmWave WLAN performance. In this work, we present a comprehensive simulation study of linear AP mobility that investigates various dimensions, including the number of mobile APs, the placement of the mobile AP platforms, and the length of the platforms. The results show how WLAN performance varies across these dimensions and also compares the results against a varying number of static APs to quantity the performance gains achievable from mobility. The results show that even 2 or 3 mobile APs can significantly outperform a much larger number of static APs and that deploying up to 3 mobile APs in a room brings substantial performance gains.more » « less
-
Abstract—Cell-free massive MIMO (CF-mMIMO) is expected to provide reliable wireless services for a large number of user equipments (UEs) using access points (APs) distributed across a wide area. When the UEs are battery-powered, uplink energy efficiency (EE) becomes an important performance metric for CF-mMIMO systems. Therefore, if the “target” spectral efficiency (SE) is met, it is important to optimize the uplink EE when setting the transmit powers of the UEs. Also, such transmit power control (TPC) method must be tested on channel data from real-world measurements to prove its effectiveness. In this paper, we compare three different TPC algorithms using zero-forcing reception by applying them to 3.5 GHz channel measurement data featuring 30,000 possible AP locations and 8 UE locations in a 200m×200m area. We show that the max-min EE algorithm is highly effective in improving the uplink EE at a target SE, especially if the number of single-antenna APs is large, circuit power consumption is low, and the maximum allowed transmit power of the UEs is high.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1109/TWC.2021.3109789
