This study presents a comprehensive low‐temperature thermochronometric data set from the Shanxi Rift, Taihangshan, and eastern Ordos block in North China, including new apatite fission track and apatite (U‐Th‐Sm)/He data and published apatite and zircon fission track and (U‐Th‐Sm)/He data. We use these data and new thermal history inversion models to reveal that the Shanxi Rift and Taihangshan experienced an increase in cooling rates between ca. 110–70 Ma and ca. 50–30 Ma. A preceding ca. 160–135 Ma cooling event is generally restricted to the western rift margin in the Lüliangshan and Hengshan. In contrast, the ca. 50–30 Ma cooling event was widespread and occurred coevally with the opening of the Bohai Basin and slip across the NNE‐striking Eastern Taihangshan fault. In the southern rift zone, however, exhumation beginning ca. 50 Ma was likely associated with fault block uplift across the ESE–striking Qinling and Huashan faults, which accompanied the extensional opening of the Weihe Graben. Coeval fault slip along the NNE–striking Eastern Taihangshan faults and ESE–striking Qinling and Huashan faults was associated with NW‐SE extension in North China related to oblique subduction of the Pacific plate under Eastern Asia and slow convergence rates. The Shanxi Rift is commonly attributed to Late Miocene and younger extension, but our new thermochronologic data do not precisely record the onset of rifting. However, our inversion models do suggest ≤∼50°C of Neogene–Quaternary cooling, consistent with ≤∼2 km of footwall uplift across most range‐bounding faults.
- Award ID(s):
- 1918357
- NSF-PAR ID:
- 10297106
- Date Published:
- Journal Name:
- New Mexico geology
- ISSN:
- 0196-948X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Abstract -
Abstract Strongly lineated terrain outside of Iceland's active plate boundary zones is created by faults and dikes aligned with the rift zones where they formed, similar to the spreading fabric defined by abyssal hills generated at mid‐ocean ridge spreading centers. As expected, rift‐parallel normal faults and fissures dominate in the active rift zones, but in older crust to the east and west, faults with strike‐slip and oblique‐slip displacements dominate. Some areas have widespread, small‐scale, strike‐slip, and oblique‐slip faults, while others have more widely spaced, larger, strike‐slip fault zones. In most cases, the strike‐slip and oblique‐slip faults strike subparallel to nearby older dikes and normal faults assumed to indicate the orientation of the rift zones where they formed. Strike‐slip displacements overprinting normal faults and along dike margins suggest reactivation of spreading‐related zones of weakness. More complicated fault geometries and kinematics occur near the oblique rifts and the major transform fault zones. The sense of movement on the strike‐slip and oblique‐slip faults is broadly systematic with respect to the active Northern and Eastern Rift Zones supporting the interpretation that they are the result of crustal block rotations on either side of rift zones that propagate to the north and south away from the center of the Iceland hot spot. Similar fault kinematics may occur along mid‐ocean ridges and other magmatic rifts where rift propagation occurs on a range of scales.
-
Abstract Rio Grande Rise (RGR) and Walvis Ridge (WR) are South Atlantic large igneous provinces (LIPs), formed on the South American and African plates, respectively, mainly by volcanism from a hot spot erupting at the Mid‐Atlantic Ridge (MAR) during the Late Cretaceous. Both display morphologic complexities that imply their tectonic evolution is incompletely understood. We studied bathymetry, gravity, and vertical gravity gradient maps derived from satellite altimetry to trace faults providing indications of seafloor spreading directions and changes. We also examined magnetic anomalies for time constraint and reflection seismic data for structural information. Abyssal hill fabric and magnetic anomaly data indicate that the area between RGR and WR was anomalous between anomalies C34 (83.6 Ma) and C30 (66.4 Ma) owing to reorganization of a right‐lateral transform on the MAR. This event began ∼92 Ma as the transform shifted south to form multiple, short‐offset right‐lateral transforms, with the reorganization extending through anomaly C34 and ending before anomaly C30. Anomalous spacing of magnetic anomalies and discordant fault fabric indicate that a microplate formed with a core of Cretaceous Quiet Zone seafloor. As the MAR jumped eastward, this microplate was captured by the South American plate and now resides mostly in a basin between the main RGR plateau and a related ridge to the east (East Rio Grande Rise). The microplate is ringed by igneous massifs, implying a link with volcanism. The results presented here indicate that these two LIPs had a complex Late Cretaceous history that belies simple hot spot models.
-
We interpret the kinematics of the Tangra Yumco (TYC) rift by evaluating spatiotemporal trends in fault displacement, extension onset, and exhumation rates. We present new geologic mapping, U-Pb geochronology, zircon (U-Th)/He (ZHe) thermochronology, and HeFTy thermal modeling results that are critical to testing dynamic models of extension in Tibet. The TYC rift is bounded by two NNE striking (~N10°E-N35°E) high angle (~45-70°) active normal faults that alternate dominance along strike. Footwall granodiorites show foliation, slip lineation, and fault plane striation measurements indicative of northeast directed oblique sinistral-normal slip. In North and South TYC, hanging wall deposits are cut by a series of active high-angle normal faults which likely sole into a master fault at depth, while in central TYC, hanging wall deposits display synthetic graben structures potentially indicative of low-angle faulting. Analysis of ~50 samples collected across key structural relationships in and around TYC yield 14 mean U-Pb dates between ~59-49 Ma and ~190 single-grain ZHe dates between ~60-4 Ma with spatial trends in ZHe data correlating strongly with latitude. Samples from Gangdese latitudes show a concentration of ~28-15 Ma ages, while those north of ~29.8° latitude yield both younger (~9-4 Ma) and older (~59-45 Ma) ages. We interpret (1) Gangdese Range samples reflect exhumation during contraction and uplift along the GCT peaking at ~21-20 Ma, (2) ~9-4 Ma ages reveal extension timing along fault segments experiencing significant rift-related exhumation, and (3) ~59-45 Ma ages represent un-reset or partially-reset samples from fault segments that have experienced lesser magnitudes of rift exhumation. HeFTy thermal models indicate a two-stage cooling history with initial slow cooling followed by accelerated cooling rates in Late Miocene-Pliocene time (~13-4 Ma) consistent with prior results from TYC and other Tibetan rifts. Our data are consistent with a segment linkage fault evolution model for the TYC rift, with underthrusting of Indian lithosphere likely related to the northward acceleration of rifting. Future work will utilize advanced HeFTy modeling including U-Pb and apatite fission track data to further constrain the exhumation history of TYC and test dynamic models of extension for southern Tibet.more » « less
-
Oblique convergence along strike-slip faults can lead to both distributed and localized deformation. How focused transpressive deformation is both localized and maintained along sub-vertical wrench structures to create high topography and deep exhumation warrants further investigation. The high peak region of the Hayes Range, central Alaska, USA, is bound by two lithospheric scale vertical faults: the Denali fault to the south and Hines Creek fault to the north. The high topography area has peaks over 4000 m and locally has experienced more than 14 km of Neogene exhumation, yet the mountain range is located on the convex side of the Denali fault Mount Hayes restraining bend, where slip partitioning alone cannot account for this zone of extreme exhumation. Through the application of U-Pb zircon, 40Ar/39Ar (hornblende, muscovite, biotite, and K-feldspar), apatite fission-track, and (U-Th)/He geo-thermochronology, we test whether these two parallel, reactivated suture zone structures are working in tandem to vertically extrude the Between the Hines Creek and Denali faults block on the convex side of the Mount Hayes restraining bend. We document that since at least 45 Ma, the Denali fault has been bent and localized in a narrow fault zone (<160 m) with a significant dip-slip component, the Mount Hayes restraining bend has been fixed to the north side of the Denali fault, and that the Between the Hines Creek and Denali faults block has been undergoing vertical extrusion as a relatively coherent block along the displacement “free faces” of two lithospheric scale suture zone faults. A bent Denali fault by ca. 45 Ma supports the long-standing Alaska orocline hypothesis that has Alaska bent by ca. 44 Ma. Southern Alaska is currently converging at ~4 mm/yr to the north against the Denali fault and driving vertical extrusion of the Between the Hines Creek and Denali faults block and deformation north of the Hines Creek fault. We apply insights ascertained from the Between the Hines Creek and Denali faults block to another region in southern Alaska, the Fairweather Range, where extreme topography and persistent exhumation is also located between two sub-parallel faults, and propose that this region has likely undergone vertical extrusion along the free faces of those faults.more » « less