The relative velocities and positions of monodisperse high-inertia particle pairs in isotropic turbulence are studied using direct numerical simulations (DNS), as well as Langevin simulations (LS) based on a probability density function (PDF) kinetic model for pair relative motion. In a prior study (Rani et al. , J. Fluid Mech. , vol. 756, 2014, pp. 870–902), the authors developed a stochastic theory that involved deriving closures in the limit of high Stokes number for the diffusivity tensor in the PDF equation for monodisperse particle pairs. The diffusivity contained the time integral of the Eulerian two-time correlation of fluid relative velocities seen by pairs that are nearly stationary. The two-time correlation was analytically resolved through the approximation that the temporal change in the fluid relative velocities seen by a pair occurs principally due to the advection of smaller eddies past the pair by large-scale eddies. Accordingly, two diffusivity expressions were obtained based on whether the pair centre of mass remained fixed during flow time scales, or moved in response to integral-scale eddies. In the current study, a quantitative analysis of the (Rani et al. 2014) stochastic theory is performed through a comparison of the pair statistics obtained using LS with those from DNS. LS consist of evolving the Langevin equations for pair separation and relative velocity, which is statistically equivalent to solving the classical Fokker–Planck form of the pair PDF equation. Langevin simulations of particle-pair dispersion were performed using three closure forms of the diffusivity – i.e. the one containing the time integral of the Eulerian two-time correlation of the seen fluid relative velocities and the two analytical diffusivity expressions. In the first closure form, the two-time correlation was computed using DNS of forced isotropic turbulence laden with stationary particles. The two analytical closure forms have the advantage that they can be evaluated using a model for the turbulence energy spectrum that closely matched the DNS spectrum. The three diffusivities are analysed to quantify the effects of the approximations made in deriving them. Pair relative-motion statistics obtained from the three sets of Langevin simulations are compared with the results from the DNS of (moving) particle-laden forced isotropic turbulence for $$St_{\unicode[STIX]{x1D702}}=10,20,40,80$$ and $$Re_{\unicode[STIX]{x1D706}}=76,131$$ . Here, $$St_{\unicode[STIX]{x1D702}}$$ is the particle Stokes number based on the Kolmogorov time scale and $$Re_{\unicode[STIX]{x1D706}}$$ is the Taylor micro-scale Reynolds number. Statistics such as the radial distribution function (RDF), the variance and kurtosis of particle-pair relative velocities and the particle collision kernel were computed using both Langevin and DNS runs, and compared. The RDFs from the stochastic runs were in good agreement with those from the DNS. Also computed were the PDFs $$\unicode[STIX]{x1D6FA}(U|r)$$ and $$\unicode[STIX]{x1D6FA}(U_{r}|r)$$ of relative velocity $$U$$ and of the radial component of relative velocity $$U_{r}$$ respectively, both PDFs conditioned on separation $$r$$ . The first closure form, involving the Eulerian two-time correlation of fluid relative velocities, showed the best agreement with the DNS results for the PDFs.
more »
« less
Particle pair statistics of inertial particles at small separation using stereoscopic particle tracking
Particle pair statistics of inertial particles having average Stokes numbers of 2.1 and 14 are measured in isotropic turbulence at a Reynolds number of Reλ = 240. The radial distribution function (RDF) and mean relative approach velocity are obtained at small separation distances using 2-frame stereoscopic particle tracking velocimetry (stereo-PTV). At small separation distance, the RDF varies by an order of magnitude in the range of Stokes numbers investigated. However, the mean relative approach velocity is found to have a weak dependence on Stokes number. The results are shown to have high accuracy when compared to analogous mono-PTV datasets, and can be used to provide a more reliable estimate of the inter-particle collision rate. The main limitation of the measurement is observed at separation distances less than the laser sheet thickness, where the technique tended to underestimate the mean relative approach velocity.
more »
« less
- Award ID(s):
- 1756068
- PAR ID:
- 10302024
- Date Published:
- Journal Name:
- 14th International Symposium on Particle Image Velocimetry
- Volume:
- 1
- Issue:
- 1
- ISSN:
- 2769-7576
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Particle ingestion into turbine engines is a widespread problem that can cause significant degradation in engine service life. One primary damage mechanism is deposition of particulate matter in internal cooling passages. Musgrove et al. proposed a compact particle separator that could be installed between the combustor bypass exit and turbine vane cooling passage inlet. The design had small pressure losses but provided limited particle separation, and its performance has proved difficult to replicate in subsequent experiments. Borup et al recently developed a Magnetic Resonance Imaging (MRI) based technique for making full-field, 3D measurements of the mean particle concentration distribution in complex flows. A particle separator based on the Musgrove et all design was fabricated out of plastic using 3D printing. The primary difference from earlier designs was the addition of a drain from the collector, through which 3% of the total flow was extracted. The separator efficiency was measured at two Reynolds numbers, using water as the working fluid and 33 micron titanium microspheres to represent dust particles. Particle Stokes number was shown to play the dominant role in determining efficiency across studies. MRI was used to obtain the 3D volume fraction and 3-component velocity fields. The velocity data showed that flow was poorly distributed between the separator louvers, while the collector flow followed the optimal pattern for particle retention. The particle distribution data revealed that strong swirling flow in the collector centrifuged particles toward the outer wall of the collector and intro a partitioned region of quiescent flow, where they proceeded to exit the collector.more » « less
-
Abstract Explosive eruptions expel volcanic gases and particles at high pressures and velocities. Within this multiphase fluid, small ash particles affect the flow dynamics, impacting mixing, entrainment, turbulence, and aggregation. To examine the role of turbulent particle behavior, we conducted an analogue experiment using a particle‐laden jet. We used compressed air as the carrier fluid, considering turbulent conditions at Reynolds numbers from approximately 5,000 to 20,000. Two different particles were examined: 14‐μm diameter solid nickel spheres and 13‐μm diameter hollow glass spheres. These resulted in Stokes numbers between 1 and 35 based on the convective scale. The particle mass percentage in the mixture is varied from 0.3% to more than 20%. Based on a 1‐D volcanic plume model, these Stokes numbers and mass loadings corresponded to millimeter‐scale particle diameters at heights of 4–8 km above the vent during large, sustained eruptions. Through particle image velocimetry, we measured the mean flow behavior and the turbulence statistics in the near‐exit region, primarily focusing on the dispersed phase. We show that the flow behavior is dominated by the particle inertia, with high Stokes numbers reducing the entrainment by more than 40%. When applied to volcanic plumes, these results suggest that high‐density particles can greatly increase the probability of column collapse.more » « less
-
Direct numerical simulation is used to investigate effects of turbulent flow in the confined geometry of a face-centred cubic porous unit cell on the transport, clustering and deposition of fine particles at different Stokes numbers ( $St = 0.01, 0.1, 0.5, 1, 2$ ) and at a pore Reynolds number of 500. Particles are advanced using one-way coupling and the collision of particles with pore walls is modelled as perfectly elastic with specular reflection. Tools for studying inertial particle dynamics and clustering developed for homogeneous flows are adapted to take into account the embedded, curved geometry of the pore walls. The pattern and dynamics of clustering are investigated using the volume change of Voronoi tesselation in time to analyse the divergence and convergence of the particles. Similar to the case of homogeneous, isotropic turbulence, the cluster formation is present at large volumes, while cluster destruction is prominent at small volumes and these effects are amplified with the Stokes number. However, unlike homogeneous, isotropic turbulence, the formation of a large number of very small volumes was observed at all Stokes numbers and attributed to the collision of particles with the pore wall. Multiscale wavelet analysis of the particle number density indicates that the peak of the energy density spectrum, representative of enhanced particle clustering, shifts towards larger scales with an increase in the Stokes number. Scale-dependent skewness and flatness quantify the intermittent void and cluster distribution, with cluster formation observed at small scales for all Stokes numbers, and void regions at large scales for large Stokes numbers.more » « less
-
Direct numerical simulation is used to investigate effects of turbulent flow in the confined geometry of a face-centred cubic porous unit cell on the transport, clustering and deposition of fine particles at different Stokes numbers ( 𝑆𝑡=0.01,0.1,0.5,1,2 ) and at a pore Reynolds number of 500. Particles are advanced using one-way coupling and the collision of particles with pore walls is modelled as perfectly elastic with specular reflection. Tools for studying inertial particle dynamics and clustering developed for homogeneous flows are adapted to take into account the embedded, curved geometry of the pore walls. The pattern and dynamics of clustering are investigated using the volume change of Voronoi tesselation in time to analyse the divergence and convergence of the particles. Similar to the case of homogeneous, isotropic turbulence, the cluster formation is present at large volumes, while cluster destruction is prominent at small volumes and these effects are amplified with the Stokes number. However, unlike homogeneous, isotropic turbulence, the formation of a large number of very small volumes was observed at all Stokes numbers and attributed to the collision of particles with the pore wall. Multiscale wavelet analysis of the particle number density indicates that the peak of the energy density spectrum, representative of enhanced particle clustering, shifts towards larger scales with an increase in the Stokes number. Scale-dependent skewness and flatness quantify the intermittent void and cluster distribution, with cluster formation observed at small scales for all Stokes numbers, and void regions at large scales for large Stokes numbers.more » « less
An official website of the United States government

