More Like this

1. A Novel Bio-Inspired Pneumatic Valve Adapter for Soft Robotic Vasculature

   https://doi.org/10.1115/SMASIS2020-2397  

   Saunders, Benjamin O.; Swensen, John P. (September 2020, ASME 2020 Conference on Smart Materials, Adaptive Structures and Intelligent Systems)

   null (Ed.)

   Abstract This paper proposes a novel pneumatic valve adapter that decreases the size and quantity of pneumatic tubes and valves necessary for soft robotics by mimicking cardiovascular systems. Some cardiovascular systems, evolved to be powered by a single reservoir, the heart, which in turn powers the rest of the body by systematically opening and closing valves as needed. The presented valve adapter consists of a set of concentric tube, where both tubes have strategically patterned holes. The inner tube can be moved translationally and rotationally to align with designated hole positions in the outer tube, thus opening and closing pathways to chambers for pressure flow. The two-tube system can be used to either pressurize a chamber or depressurize a chamber or multiple chambers simultaneously. 

   more » « less
2. Programmable soft valves for digital and analog control

   https://doi.org/10.1073/pnas.2205922119  

   Decker, Colter J.; Jiang, Haihui Joy; Nemitz, Markus P.; Root, Samuel E.; Rajappan, Anoop; Alvarez, Jonathan T.; Tracz, Jovanna; Wille, Lukas; Preston, Daniel J.; Whitesides, George M. (October 2022, Proceedings of the National Academy of Sciences)

   In soft devices, complex actuation sequences and precise force control typically require hard electronic valves and microcontrollers. Existing designs for entirely soft pneumatic control systems are capable of either digital or analog operation, but not both, and are limited by speed of actuation, range of pressure, time required for fabrication, or loss of power through pull-down resistors. Using the nonlinear mechanics intrinsic to structures composed of soft materials—in this case, by leveraging membrane inversion and tube kinking—two modular soft components are developed: a piston actuator and a bistable pneumatic switch. These two components combine to create valves capable of analog pressure regulation, simplified digital logic, controlled oscillation, nonvolatile memory storage, linear actuation, and interfacing with human users in both digital and analog formats. Three demonstrations showcase the capabilities of systems constructed from these valves: 1) a wearable glove capable of analog control of a soft artificial robotic hand based on input from a human user’s fingers, 2) a human-controlled cushion matrix designed for use in medical care, and 3) an untethered robot which travels a distance dynamically programmed at the time of operation to retrieve an object. This work illustrates pathways for complementary digital and analog control of soft robots using a unified valve design. 

   more » « less
3. A dynamic electrically driven soft valve for control of soft hydraulic actuators

   https://doi.org/10.1073/pnas.2103198118  

   Xu, Siyi; Chen, Yufeng; Hyun, Nak-seung P.; Becker, Kaitlyn P.; Wood, Robert J. (August 2021, Proceedings of the National Academy of Sciences)

   null (Ed.)

   Regulation systems for fluid-driven soft robots predominantly consist of inflexible and bulky components. These rigid structures considerably limit the adaptability and mobility of these robots. Soft valves in various forms for fluidic actuators have been developed, primarily fluidically or electrically driven. However, fluidic soft valves require external pressure sources that limit robot locomotion. State-of-the-art electrostatic valves are unable to modulate pressure beyond 3.5 kPa with a sufficient flow rate (>6 mL⋅min −1 ). In this work, we present an electrically powered soft valve for hydraulic actuators with mesoscale channels based on a different class of ultrahigh-power density dynamic dielectric elastomer actuators. The dynamic dielectric elastomer actuators (DEAs) are actuated at 500 Hz or above. These DEAs generate 300% higher blocked force compared with the dynamic DEAs in previous works and their loaded power density reaches 290 W⋅kg −1 at operating conditions. The soft valves are developed with compact (7 mm tall) and lightweight (0.35 g) dynamic DEAs, and they allow effective control of up to 51 kPa of pressure and a 40 mL⋅min −1 flow rate with a response time less than 0.1 s. The valves can also tune flow rates based on their driving voltages. Using the DEA soft valves, we demonstrate control of hydraulic actuators of different volumes and achieve independent control of multiple actuators powered by a single pressure source. This compact and lightweight DEA valve is capable of unprecedented electrical control of hydraulic actuators, showing the potential for future onboard motion control of soft fluid-driven robots. 

   more » « less
4. A pneumatic random-access memory for controlling soft robots

   https://doi.org/10.1371/journal.pone.0254524  

   Hoang, Shane; Karydis, Konstantinos; Brisk, Philip; Grover, William H. (July 2021, PLOS ONE)

   Mattoli, Virgilio (Ed.)

   Pneumatically-actuated soft robots have advantages over traditional rigid robots in many applications. In particular, their flexible bodies and gentle air-powered movements make them more suitable for use around humans and other objects that could be injured or damaged by traditional robots. However, existing systems for controlling soft robots currently require dedicated electromechanical hardware (usually solenoid valves) to maintain the actuation state (expanded or contracted) of each independent actuator. When combined with power, computation, and sensing components, this control hardware adds considerable cost, size, and power demands to the robot, thereby limiting the feasibility of soft robots in many important application areas. In this work, we introduce a pneumatic memory that uses air (not electricity) to set and maintain the states of large numbers of soft robotic actuators without dedicated electromechanical hardware. These pneumatic logic circuits use normally-closed microfluidic valves as transistor-like elements; this enables our circuits to support more complex computational functions than those built from normally-open valves. We demonstrate an eight-bit nonvolatile random-access pneumatic memory (RAM) that can maintain the states of multiple actuators, control both individual actuators and multiple actuators simultaneously using a pneumatic version of time division multiplexing (TDM), and set actuators to any intermediate position using a pneumatic version of analog-to-digital conversion. We perform proof-of-concept experimental testing of our pneumatic RAM by using it to control soft robotic hands playing individual notes, chords, and songs on a piano keyboard. By dramatically reducing the amount of hardware required to control multiple independent actuators in pneumatic soft robots, our pneumatic RAM can accelerate the spread of soft robotic technologies to a wide range of important application areas. 

   more » « less
5. Tendon-Actuated Concentric Tube Endonasal Robot (TACTER)

   https://doi.org/10.1142/S2424905X25500023  

   Yamamoto, Kent K; Zachem, Tanner J; Kheradmand, Pejman; Zheng, Patrick; Abdelgadir, Jihad; Bailey, Jared Laurance; Pieter, Kaelyn; Codd, Patrick J; Chitalia, Yash (December 2025, Journal of Medical Robotics Research)

   Endoscopic endonasal approaches (EEA) have become more prevalent for minimally invasive skull base and sinus surgeries. However, rigid scopes and tools significantly decrease the surgeon’s ability to operate in tight anatomical spaces and avoid critical structures such as the internal carotid artery and cranial nerves. This paper proposes a novel tendon-actuated concentric tube endonasal robot (TACTER) design in which two tendon-actuated robots are concentric to each other, resulting in an outer and inner robot that can bend independently. The outer robot is a unidirectionally asymmetric notch (UAN) nickel-titanium robot, and the inner robot is a 3D-printed bidirectional robot, with a nickel–titanium bending member. In addition, the inner robot can translate axially within the outer robot, allowing the tool to traverse through structures while bending, thereby executing follow-the-leader motion. A Cosserat-rod-based mechanical model is proposed that uses tendon tension of both tendon-actuated robots and the relative translation between the robots as inputs and predicts the TACTER tip position for varying input parameters. The model is validated with experiments, and a human cadaver experiment is presented to demonstrate maneuverability from the nostril to the sphenoid sinus. This work presents the first tendon-actuated concentric tube (TACT) dexterous robotic tool capable of performing follow-the-leader motion within natural nasal orifices to cover workspaces typically required for a successful EEA. 

   more » « less