An official website of the United States government
Hybrid solid electrolytes are composed of organic (polymer) and inorganic (ceramic) ion conducting materials, and are promising options for large-scale production of solid state lithium–metal batteries. Hybrid solid electrolytes containing 15 vol% Al-LLZO demonstrate optimal ionic conductivity properties. Ionic conductivity is shown to decrease at high inorganic loadings. This optimum is most obvious above the melting temperature of polyethylene oxide where the polymer is amorphous. Structural analysis using synchrotron nanotomography reveals that the inorganic particles are highly aggregated. The aggregation size grows with inorganic content and the largest percolating clusters measured for 5 vol%, 15 vol% and 50 vol% were ∼12 μm 3 , 206 μm 3 , and 324 μm 3 , respectively. Enhanced transport in hybrid electrolytes is shown to be due to polymer|particle (Al-LLZO) interactions and ionic conductivity is directly related to the accessible surface area of the inorganic particles within the electrolyte. Ordered and well-dispersed structures are ideal for next generation hybrid solid electrolytes.
more »
« less
Microstructural impacts on ionic conductivity of oxide solid electrolytes from a combined atomistic-mesoscale approach
Abstract Although multiple oxide-based solid electrolyte materials with intrinsically high ionic conductivities have emerged, practical processing and synthesis routes introduce grain boundaries and other interfaces that can perturb primary conduction channels. To directly probe these effects, we demonstrate an efficient and general mesoscopic computational method capable of predicting effective ionic conductivity through a complex polycrystalline oxide-based solid electrolyte microstructure without relying on simplified equivalent circuit description. We parameterize the framework for Li 7- x La 3 Zr 2 O 12 (LLZO) garnet solid electrolyte by combining synthetic microstructures from phase-field simulations with diffusivities from molecular dynamics simulations of ordered and disordered systems. Systematically designed simulations reveal an interdependence between atomistic and mesoscopic microstructural impacts on the effective ionic conductivity of polycrystalline LLZO, quantified by newly defined metrics that characterize the complex ionic transport mechanism. Our results provide fundamental understanding of the physical origins of the reported variability in ionic conductivities based on an extensive analysis of literature data, while simultaneously outlining practical design guidance for achieving desired ionic transport properties based on conditions for which sensitivity to microstructural features is highest. Additional implications of our results are discussed, including a possible connection between ion conduction behavior and dendrite formation.
more »
« less
- Award ID(s):
- 1710630
- PAR ID:
- 10310898
- Date Published:
- Journal Name:
- npj Computational Materials
- Volume:
- 7
- Issue:
- 1
- ISSN:
- 2057-3960
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Composite polymer electrolytes that incorporate ceramic fillers in a polymer matrix offer mechanical strength and flexibility as solid electrolytes for lithium metal batteries. However, fast Li+ transport between polymer and Li+-conductive filler phases is not a simple achievement due to high barriers for Li+ exchange across the interphase. This study demonstrates how modification of Li7La3Zr2O12 (LLZO) nanofiller surfaces with silane chemistries influences Li+ transport at local and global electrolyte scales. Anhydrous reactions covalently link amine-functionalized silanes [(3-aminopropyl)triethoxysilane (APTES)] to LLZO nanoparticles, which protects LLZO in air. APTES functionalization lowers the poly (ethylene oxide) (PEO)-LLZO interphase resistance to half that of unmodified LLZO and increases effective Li+ transference number, while insulating Al2O3 completely blocks ion exchange and lowers transference number and conductivity in PEO-lithium bis(trifluoromethanesulfonyl)imide (LiTFSI)-LLZO composites. Modeling an inner resistive interphase between LLZO and PEO surrounded by an outer conductive interphase explains non-linear conductivity trends. Solid-state 7Li & 6Li nuclear magnetic resonance shows Li+ only exchanges between PEO-LiTFSI and some LLZO interphase, with no appreciable Li+ transport through bulk LLZO. Surface functionalization is a promising path toward lowering the polymer-ceramic interphase resistance. This work demonstrates that local changes in Li+ transport affect macroscopic performance, highlighting the intricate relationships between all interfaces in inherently heterogeneous composite polymer electrolytes.more » « less
-
Despite significant interest toward solid-state electrolytes owing to their superior safety in comparison to liquid-based electrolytes, sluggish ion diffusion and high interfacial resistance limit their application in durable and high-power density batteries. Here, a novel quasi-solid Li+ ion conductive nanocomposite polymer electrolyte containing black phosphorous (BP) nanosheets is reported. The developed electrolyte is successfully cycled against Li metal (over 550 h cycling) at 1 mA cm(-2) at room temperature. The cycling overpotential is dropped by 75% in comparison to BP-free polymer composite electrolyte indicating lower interfacial resistance at the electrode/electrolyte interfaces. Molecular dynamics simulations reveal that the coordination number of Li+ ions around (trifluoromethanesulfonyl)imide (TFSI-) pairs and ethylene-oxide chains decreases at the Li metal/electrolyte interface, which facilitates the Li+ transport through the polymer host. Density functional theory calculations confirm that the adsorption of the LiTFSI molecules at the BP surface leads to the weakening of N and Li atomic bonding and enhances the dissociation of Li+ ions. This work offers a new potential mechanism to tune the bulk and interfacial ionic conductivity of solid-state electrolytes that may lead to a new generation of lithium polymer batteries with high ionic conduction kinetics and stable long-life cycling.more » « less
-
Mismatched complex oxide thin films and heterostructures have gained significant traction for use as electrolytes in intermediate temperature solid oxide fuel cells, wherein interfaces exhibit variation in ionic conductivity as compared to the bulk. Although misfit dislocations present at interfaces in these structures impact ionic conductivity, the fundamental mechanisms responsible for this effect are not well understood. To this end, a kinetic lattice Monte Carlo (KLMC) model was developed to trace oxygen vacancy diffusion at misfit dislocations in SrTiO3/BaZrO3 heterostructures and elucidate the atomistic mechanisms governing ionic diffusion at oxide interfaces. The KLMC model utilized oxygen vacancy migration energy barriers computed using molecular statics. While some interfaces promote oxygen vacancy diffusion, others impede their transport. Fundamental factors such as interface layer chemistry, misfit dislocation structure, and starting and ending sites of migrating ions play a crucial role in oxygen diffusivity. Molecular dynamics (MD) simulations were further performed to support qualitative trends for oxygen vacancy diffusion. Overall, the agreement between KLMC and MD is quite good, though MD tends to predict slightly higher conductivities, perhaps a reflection of nuanced structural relaxations that are not captured by KLMC. The current framework comprising KLMC modeling integrated with molecular statics offers a powerful tool to perform mechanistic studies focused on ionic transport in thin film oxide electrolytes and facilitate their rational design.more » « less
-
The rapid growth of mobile, portable, wearable and flexible electronics leads to the increasing demand for energy storage devices using solid-state polymer electrolytes (PEs), which outperform liquid electrolytes in terms of safety, mechanical properties, and simplicity of device fabrication and packaging. However, processing PEs will always introduce solvent molecules that greatly affect the ionic conductivity and mechanical properties. For example, PEs prepared through solution-casting methods always have solvent residues. A trace amount of water molecules absorbed from the air is also inevitable. Recently, we demonstrated the controlled introduction of solvent molecules to PEs to balance the ionic conductivity and mechanical stiffness for structural energy storage applications. To better understand how solvent molecules behave and interact with other components in PEs, here we present the molecular dynamics simulation of a representative polymer electrolyte system with various water content. We use simulation results to determine the effect of trace water content before forming a liquid phase on ionic conductivity and mechanical properties. The insights into the molecular interactions in the PE system will help us design and optimize Pes’ composition and processing for practical applications. The simulation model of polymer electrolyte is built with polyethylene oxide (PEO) and lithium perchlorate (LiClO4) with various water contents, in which the water molecule to lithium-ion ratio ranges from 0 to 3. The electrolyte with each water content is simulated between two graphene electrodes to determine its ionic conductivity. Uniaxial deformation has been performed on the electrolyte to obtain the mechanical properties. All simulations were performed using the molecular dynamics simulation code LAMMPS with the CHARMM force field. The results show that the ionic conductivity of the polymer electrolyte system increases significantly (up to one order of magnitude) with the increase of water content (up to 3 water molecules per lithium ion), even when the added water does not form a continuous liquid phase. The change of ionic conductivity with water content is correlated to the degree of association between different types of ions or molecules in the system, as evidenced by the evaluation of the radial distribution functions. As the association between polymer molecules and lithium ions reduces with increasing water, it becomes easier for the lithium ions to diffuse and resulting in higher ionic conductivity. It is also observed that the perchlorate ions’ interactions with polymer molecules remain the same with different water contents, which shows different roles of lithium ions and perchlorate ions in ion conduction in this system. On the other hand, the modulus of elasticity of the polymer electrolyte does not change much with the increase of water, which agrees with the previous experimental work of our group. This means that the trace amount of water is strongly associated with other solid molecules or ions and is not affecting the stiffness of the system as long as no liquid phase is formed. The results will lead to novel strategies to design polymer electrolytes with both high ionic conductivity and good mechanical properties for flexible or multifunctional energy storage applications.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1038/s41524-021-00681-8
